SGP/MFR10M/C1 - Bad connection

The instrument was pulled for quarterly calibration on 20091105.  When the instrument was 
reinstalled, the head cable was not making a good connection to the head.  Cleaning the 
connector and reinstalling resolved the issue.

• up_hemisp_broadband
• up_hemisp_narrowband_filter6
• up_hemisp_narrowband_filter4
• up_hemisp_narrowband_filter5
• up_hemisp_narrowband_filter2
• up_hemisp_narrowband_filter3
• up_hemisp_narrowband_filter1

• up_hemisp_narrowband_filter1
• up_hemisp_broadband
• up_hemisp_narrowband_filter3
• up_hemisp_narrowband_filter2
• up_hemisp_narrowband_filter5
• up_hemisp_narrowband_filter4
• up_hemisp_narrowband_filter6