Suggestions: | If users want to use QCRad to obtain meteorological data, be aware that the data is
5-minute apart. Interpolation should be done if finer time intervals are required. The
fields affected are:
Temp_Air
rh
press
wind_speed
wind_direction
Precip
Additionally, some LW irradiance QC checks are only applied once every 5 minutes, so not all data has been screened because of the missing meteorological values. There is not necessarily anything wrong with these irradiance measurements, we just have less information about their quality.
If users want to use QCRad to obtain meteorological data, be aware that the data is
5
-minute apart. Interpolation should be done if finer time intervals are required. The
fields affected are:
Temp_Air
rh
press
wind_speed
wind_direction
Precip
Additionally, some LW irradiance QC checks are only applied once every 5 minutes, so not all data has been screened because of the missing meteorological values. There is not necessarily anything wrong with these irradiance measurements, we just have less information about their quality. |