| Description: | Normally, the Raman lidar operates using a 10 second averaging time for the raw data.
However, during the period covered by the DQR, the averaging time was set to 30 seconds. This
was done inorder to help diagnose a problem in the system.
Two datastreams (twp10sasr1ferrC3.c0, twp10smr1turnC3.c0) derived from the raw data
inherently assume that the time resolution of the raw data is 10 seconds. This assumption
should have no impact on the data quality. However, users should be aware that the actual time
resolution is 30 seconds and not 10 seconds (during the period covered by this DQR). |