DQRID : D161028.2
Start DateStart TimeEnd DateEnd Time Data Quality Metric
10/17/2016080010/25/20160319Missing
more
Subject:
NSA/KAZR/C1 - Missing Data
DataStreams:nsakazrspecC1.00, nsakazrauxC1.a1, nsakazrspeccmaskgecopolC1.a0, nsakazrmdC1.a1,
nsakazrgeC1.b1, nsakazrspeccmaskgexpolC1.a0, nsakazrgeC1.a1, nsakazrauxC1.a0, nsakazrmdC1.b1,
nsakazrspeccmaskhicopolC1.a0, nsakazrC1.00, nsakazrspeccmaskmdxpolC1.a0,
nsakazrspeccmaskmdcopolC1.a0, nsakazrspeccmaskhixpolC1.a0, nsakazrhiC1.a1
Description:
Server failed to boot and a new power supply was needed.  KAZR was down during this 
period.
Suggestions: 
Measurements:nsakazrgeC1.a1:
  • mean_doppler_velocity_xpol
  • cal_constant_copol
  • spectral_width_xpol
  • mean_doppler_velocity_copol
  • lon
  • hot_noise_copol
  • reflectivity_xpol
  • spectral_width_copol
  • time
  • alt
  • lat
  • reflectivity_copol
  • signal_to_noise_ratio_copol
  • rx_noise
  • cal_constant_xpol
  • signal_to_noise_ratio_xpol
  • hot_noise_xpol
  • time_offset
  • range
  • cold_noise_xpol
  • sky_noise_xpol
  • sky_noise_copol
  • cold_noise_copol
  • base_time
more
nsakazrspecC1.00:
  • Raw data stream - documentation not supported
more
nsakazrhiC1.a1:
  • cold_noise_xpol
  • sky_noise_xpol
  • hot_noise_copol
  • signal_to_noise_ratio_copol
  • signal_to_noise_ratio_xpol
  • range
  • cold_noise_copol
  • time_offset
  • lon
  • time
  • rx_noise
  • spectral_width_copol
  • reflectivity_copol
  • spectral_width_xpol
  • base_time
  • cal_constant_xpol
  • hot_noise_xpol
  • mean_doppler_velocity_copol
  • lat
  • mean_doppler_velocity_xpol
  • alt
  • sky_noise_copol
  • cal_constant_copol
  • reflectivity_xpol
more
nsakazrspeccmaskhixpolC1.a0:
  • locator_mask
  • spectra
  • signal_to_noise_ratio
  • velocity_bins
  • range
  • reflectivity
  • time
  • mean_doppler_velocity
  • time_offset
  • base_time
  • spectral_width
more
nsakazrspeccmaskhicopolC1.a0:
  • reflectivity
  • spectra
  • base_time
  • time
  • time_offset
  • range
  • spectral_width
  • lon
  • velocity_bins
  • signal_to_noise_ratio
  • mean_doppler_velocity
  • locator_mask
  • lat
  • alt
more
nsakazrspeccmaskmdxpolC1.a0:
  • base_time
  • time_offset
  • mean_doppler_velocity
  • spectral_width
  • range
  • lon
  • time
  • spectra
  • alt
  • velocity_bins
  • lat
  • locator_mask
  • signal_to_noise_ratio
  • reflectivity
  • range_bounds
more
nsakazrspeccmaskgexpolC1.a0:
  • spectra
  • time_offset
  • lon
  • mean_doppler_velocity
  • range
  • signal_to_noise_ratio
  • locator_mask
  • time
  • reflectivity
  • base_time
  • spectral_width
  • alt
  • lat
  • range_bounds
  • velocity_bins
more
nsakazrspeccmaskgecopolC1.a0:
  • reflectivity
  • time_offset
  • spectral_width
  • range
  • mean_doppler_velocity
  • locator_mask
  • signal_to_noise_ratio
  • range_bounds
  • time
  • lon
  • base_time
  • spectra
  • velocity_bins
  • lat
  • alt
more
nsakazrgeC1.b1:
  • hot_noise_copol
  • signal_to_noise_ratio_copol
  • signal_to_noise_ratio_xpol
  • time
  • qc_spectral_width_xpol
  • hot_noise_xpol
  • reflectivity_xpol
  • range
  • qc_mean_doppler_velocity_xpol
  • spectral_width_xpol
  • time_offset
  • mean_doppler_velocity_copol
  • base_time
  • spectral_width_copol
  • lon
  • sky_noise_xpol
  • reflectivity_copol
  • mean_doppler_velocity_xpol
  • alt
  • qc_reflectivity_xpol
  • lat
  • sky_noise_copol
  • cold_noise_copol
  • rx_noise
  • cold_noise_xpol
  • qc_mean_doppler_velocity_copol
  • qc_reflectivity_copol
  • qc_spectral_width_copol
more
nsakazrC1.00:
  • Raw data stream - documentation not supported
more
nsakazrauxC1.a1:
  • Documentation not available
more
nsakazrspeccmaskmdcopolC1.a0:
  • time_offset
  • reflectivity
  • mean_doppler_velocity
  • spectral_width
  • range
  • time
  • lat
  • alt
  • range_bounds
  • locator_mask
  • velocity_bins
  • spectra
  • signal_to_noise_ratio
  • base_time
  • lon
more
nsakazrauxC1.a0:
  • temp_circulator
  • temp_noise_diode
  • time
  • time_offset
  • lon
  • rh_local
  • cal_constant_ch2_copol
  • fft_taper_type
  • temp_power_supply
  • helix_current
  • power_supply_28V
  • temp_reverse_power
  • rh_antenna
  • alt
  • cal_constant_ch1_copol
  • twta_status_is_valid
  • cal_constant_ch1_xpol
  • input_8V
  • cathode_voltage
  • lock_alarm_120
  • power_supply_5V
  • lock_alarm_360
  • fault_flags
  • tx_power
  • input_12V
  • lat
  • filament_voltage
  • cal_constant_ch2_xpol
  • processing_mode
  • temp_lna
  • power_supply_5p2V
  • lock_alarm_16560
  • temp_component_plate
  • input_15V
  • input_5V
  • temp_antenna_feedhorn
  • input_minus5V
  • rx_gain_ch1
  • twta_latest_fault_time_epoch
  • rx_gain_ch2
  • temp_antenna
  • rx_noise_ch2
  • rx_noise_ch1
  • remote_control_enabled
  • collector_voltage
  • is_powered_on
  • base_time
  • lock_alarm_1620
  • temp_local
  • temp_rf_detector
  • temp_outside_air
  • timing_mode
  • twta_status_state
  • noise_source_ch2
  • noise_source_ch1
more
nsakazrmdC1.b1:
  • range
  • qc_spectral_width_copol
  • base_time
  • reflectivity_copol
  • signal_to_noise_ratio_xpol
  • hot_noise_copol
  • reflectivity_xpol
  • qc_mean_doppler_velocity_copol
  • signal_to_noise_ratio_copol
  • cold_noise_copol
  • qc_spectral_width_xpol
  • qc_reflectivity_xpol
  • time_offset
  • spectral_width_xpol
  • qc_reflectivity_copol
  • mean_doppler_velocity_copol
  • lon
  • qc_mean_doppler_velocity_xpol
  • mean_doppler_velocity_xpol
  • sky_noise_xpol
  • cold_noise_xpol
  • sky_noise_copol
  • lat
  • alt
  • spectral_width_copol
  • hot_noise_xpol
  • rx_noise
  • time
more
nsakazrmdC1.a1:
  • sky_noise_copol
  • mean_doppler_velocity_copol
  • time
  • mean_doppler_velocity_xpol
  • time_offset
  • lat
  • alt
  • base_time
  • signal_to_noise_ratio_copol
  • hot_noise_xpol
  • sky_noise_xpol
  • lon
  • cold_noise_xpol
  • hot_noise_copol
  • cal_constant_xpol
  • cal_constant_copol
  • range
  • reflectivity_copol
  • reflectivity_xpol
  • rx_noise
  • spectral_width_xpol
  • spectral_width_copol
  • signal_to_noise_ratio_xpol
  • cold_noise_copol
more

Close this window