Calibration interruption of data TWP Nauru

Instument covered with black body for calibration check

• Sun sensor analog output: The sun sensor has a view angle to the sky slightly
  larger than the interferometer FOV and is aligned to the interferometer
  line-of-sight. I(sunSensorIntensity)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENEstimateNo2Ch2)
• Version number of Operational Software(systemReleaseNumber)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
• AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENEstimateNo1Ch2)
• AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENEstimateNo1Ch1)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Time at center of AERI sky observation period(Time)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• AERI LW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch1)(HBB2minNENEstimateNo2Ch1)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• base time(base_time)
• Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
• AERI instrument data channel number(channelNumber)
• AERI instrument unit serial number(AERIunitNumber)
• lat(lat)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• lon(lon)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm-1(SWskyNEN)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
• Time (HHMMSS)(timeHHMMSS)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Time offset of tweaks from base_time(time_offset)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Observation Altitude(Altitude)
• Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
• Character string containing instrument name(instrumentUnitNumber)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Julian Day including day and fraction of day(JulianDay)
• AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectraAveragesCh1)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• Wave number in reciprocal centimeters(wnumsum1)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyVariabilityAveragesCh1)
• Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
• Wave number in reciprocal centimeters(wnumsum2)
• Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
• AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
• Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Observation date(dateYYMMDD)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Wave number in reciprocal centimeters(wnumsum3)
• Wave number in reciprocal centimeters(wnumsum6)
• Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
• AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyVariabilityAveragesCh2)
• Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
  indicative of front end air flow.(frontEndFanAirTempDiff)
• Wave number in reciprocal centimeters(wnumsum7)
• Duration of scene view(sceneViewDuration)
• Wave number in reciprocal centimeters(wnumsum10)
• Wave number in reciprocal centimeters(wnumsum5)
• Wave number in reciprocal centimeters(wnumsum4)
• Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the sky view(HBBtempDrift)
• Dummy altitude for Zeb(alt)
• Wave number in reciprocal centimeters(wnumsum12)
• Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
• Wave number in reciprocal centimeters(wnumsum13)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectraAveragesCh2)
• Wave number in reciprocal centimeters(wnumsum14)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
• xxx(dataAvailable)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectraAveragesCh1)
• AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
• Wave number in reciprocal centimeters(wnumsum9)
• Wave number in reciprocal centimeters(wnumsum8)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
• Rain sensor analog output: the rain sensor is located inside the hatch near the
  sky aperture and is used to flag the critical condition of rain falling on
  the AERI s(rainSensorIntensity)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Wave number in reciprocal centimeters(wnumsum11)
• AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectraAveragesCh2)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Observation longitude(Longitude)
• Observation latitude(Latitude)
• Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)

• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• Dummy altitude for Zeb(alt)
• Wave number(wnum)
• wavenumbers for standard deviation of radiance spectra(wnum2)
• AERI instrument unit serial number(AERIunitNumber)
• Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
• Time offset of tweaks from base_time(time_offset)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Character string containing instrument name(instrumentUnitNumber)
• Time (HHMMSS)(timeHHMMSS)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Observation Altitude(Altitude)
• base time(base_time)
• lon(lon)
• Mean of radiance spectra ensemble(mean_rad)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Duration of scene view(sceneViewDuration)
• Observation date(dateYYMMDD)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Observation latitude(Latitude)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Time at center of AERI sky observation period(Time)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• AERI instrument data channel number(channelNumber)
• Observation longitude(Longitude)
• lat(lat)
• Julian Day including day and fraction of day(JulianDay)
• Version number of Operational Software(systemReleaseNumber)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)

• Raw data stream - documentation not supported(Raw data stream - documentation not supported)

• Weight factor for bottom used in calculating ambient blackbody temperature
  average(ABBbottomTempWeight)
• Character string containing instrument name(instrumentUnitNumber)
• xxx(dataAvailable)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
• Imaginary radiance during sky view averaged over (675_680 cm-1)(skyViewImaginaryRadiance675_680)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Maximum Temperature Difference Between ABB Thermistors(ABBmaxTempDiff)
• AERI instrument unit serial number(AERIunitNumber)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Radiance standard deviation during ambient blackbody view averaged over
  (2282_2287 cm-1)(ABBviewStdDevRadiance2282_2287)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Factor used to convert single-scan noise to two-minute equivalent(twoMinuteNoiseEstimateFactor)
• Interferometer window temperature measured on the outside of the aluminum window
  flange(interferometerWindowTemp)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• Motor step value given to motor controller to achieve proper mirror positioning(sceneMirrorMotorStep)
• Original laser wavenumber assumed for this instrument(originalLaserWavenumber)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Observation latitude(Latitude)
• Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
• Radiance standard deviation during ambient blackbody view averaged over (675_680
  cm-1)(ABBviewStdDevRadiance675_680)
• Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Imaginary radiance during sky view averaged over (700_705 cm-1)(skyViewImaginaryRadiance700_705)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• Relative humidity measured in the optics compartment atop the interferometer.(opticsCompartmentRelativeHumidity)
• Time offset of tweaks from base_time(time_offset)
• Field of view half angle used in finite FOV correction(FFOVhalfAngle)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Noise-equivalent Radiance in Hot Blackbody at 1000 cm-1(LW_HBB_NEN)
• Stirling cycle cooler current(coolerCurrent)
• Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
• Weight factor for apex used in calculating ambient blackbody temperature average(ABBapexTempWeight)
• Observation Altitude(Altitude)
• Scene mirror temperature as measured at the center of the back of the mirror(sceneMirrorTemp)
• Radiance standard deviation during hot blackbody view averaged over (675_680
  cm-1)(HBBviewStdDevRadiance675_680)
• Radiance standard deviation during hot blackbody view averaged over (700_705
  cm-1)(HBBviewStdDevRadiance700_705)
• AERI instrument data channel number(channelNumber)
• Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Detector temperature sensed via diode near detector(detectorTemp)
• Duration of scene view(sceneViewDuration)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm-1(SWskyNEN)
• Scene mirror position encoder value(sceneMirPosEncoder)
• Radiance standard deviation during hot blackbody view averaged over (2282_2287
  cm-1)(HBBviewStdDevRadiance2282_2287)
• Size of buffer holding expanded spectrum before interpolation(expandedInterferogramSize)
• Version number of Operational Software(systemReleaseNumber)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Imaginary radiance during sky view averaged over (2295_2300 cm-1)(skyViewImaginaryRadiance2295_2300)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Weight factor for bottom used in calculating hot blackbody temperature average(HBBbottomTempWeight)
• Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
• Radiance standard deviation during ambient blackbody view averaged over
  (2295_2300 cm-1)(ABBviewStdDevRadiance2295_2300)
• Limit applied to LWskyNEN in determination of LWskyNENacceptable(LWskyNENlimit)
• Weight factor for apex used in calculating hot blackbody temperature average(HBBapexTempWeight)
• Blackbody cavity geometry factor(BBcavityFactor)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• AERI ingest computer temperature measured at back panel of computer(computerTemp)
• Observation longitude(Longitude)
• Sun sensor analog output: The sun sensor has a view angle to the sky slightly
  larger than the interferometer FOV and is aligned to the interferometer
  line-of-sight. I(sunSensorIntensity)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
• Corrective offset for final ambient blackbody average temperature(ABBtempOffset)
• Radiance standard deviation during hot blackbody view averaged over (2510_2515
  cm-1)(HBBviewStdDevRadiance2510_2515)
• Ambient blackbody temperature(ABBbottomTemp)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Number of terms used in finite field of view correction(numberOfTerms)
• Observation date(dateYYMMDD)
• Corrective offset for final hot blackbody average temperature(HBBtempOffset)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
• Imaginary radiance during sky view averaged over (2282_2287 cm-1)(skyViewImaginaryRadiance2282_2287)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Hot blackbody temperature - apex(HBBapexTemp)
• Maximum Temperature Difference Between HBB Thermistors(HBBmaxTempDiff)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Noise-equivalent Radiance in Hot Blackbody at 2500 cm-1(SW_HBB_NEN)
• Spare temperature sensor (location TBD)(spareTemp)
• Radiance standard deviation during ambient blackbody view averaged over
  (2510_2515 cm-1)(ABBviewStdDevRadiance2510_2515)
• Time (HHMMSS)(timeHHMMSS)
• Interferometer front end fan airflow unheated temperature: used with heated
  temperature as measure of airflow.(frontEndFanAirUnheatedTemp)
• Rain sensor analog output: the rain sensor is located inside the hatch near the
  sky aperture and is used to flag the critical condition of rain falling on
  the AERI s(rainSensorIntensity)
• Julian Day including day and fraction of day(JulianDay)
• Time at center of AERI sky observation period(Time)
• Weight factor for top used in calculating ambient blackbody temperature average(ABBtopTempWeight)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• base time(base_time)
• Dummy altitude for Zeb(alt)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Weight factor for top used in calculating hot blackbody temperature average(HBBtopTempWeight)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Number of views in a sequence(sceneMirPosCount)
• Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
• Size of buffer holding initial spectrum(originalInterferogramSize)
• Ambient air temperature near the interferometer(airNearInterferometerTemp)
• Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• lon(lon)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the sky view(HBBtempDrift)
• Radiance standard deviation during hot blackbody view averaged over (2295_2300
  cm-1)(HBBviewStdDevRadiance2295_2300)
• Radiance standard deviation during hot blackbody view averaged over (985_990
  cm-1)(HBBviewStdDevRadiance985_990)
• Instrument scene mirror position identifier(sceneMirrorPosition)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBviewStdDevRadiance985_990)
• Laser wavenumber used in definition of output wavenumber scale(outputLaserWavenumber)
• Limit applied to SWskyNEN in determination of SWskyNENacceptable(SWskyNENlimit)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
• Radiance standard deviation during ambient blackbody view averaged over (700_705
  cm-1)(ABBviewStdDevRadiance700_705)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
• Relative Humidity measured in the Interferometer Enclosure(interferometerEnclosureRelativeHumidity)
• Interferometer front end fan airflow heated temperature: used with unheated
  temperature as measure of airflow.(frontEndFanAirHeatedTemp)
• Limit applied to HBBtempDrift in determination of HBBstable flag(HBBtempDriftLimit)
• Scene mirror motor case temperature(mirrorMotorTemp)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• lat(lat)
• Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Number of complete (forward+backward) interferogram scans in sample average(coadditionsCount)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Difference between frontEndFanAirHeatedTemp and frontEndFanAirUnheatedTemp
  indicative of front end air flow.(frontEndFanAirTempDiff)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)

• lon(lon)
• Wave number(wnum)
• Type of scene that has been calibrated (ASCII character as float)(calibratedSceneID)
• Observation date(dateYYMMDD)
• Dummy altitude for Zeb(alt)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Duration of scene view(sceneViewDuration)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Mean of radiance spectra ensemble(mean_rad)
• Time offset of tweaks from base_time(time_offset)
• Observation longitude(Longitude)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• BB Support Structure Temperature(BBsupportStructureTemp)
• base time(base_time)
• Time (HHMMSS)(timeHHMMSS)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• wavenumbers for standard deviation of radiance spectra(wnum2)
• Observation latitude(Latitude)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• AERI instrument data channel number(channelNumber)
• Julian Day including day and fraction of day(JulianDay)
• Scene mirror view angle in non-negative degrees, measured clockwise looking into
  interferometer window.(sceneMirrorAngle)
• Version number of Operational Software(systemReleaseNumber)
• Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Character string containing instrument name(instrumentUnitNumber)
• Time at center of AERI sky observation period(Time)
• Observation Altitude(Altitude)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• lat(lat)
• AERI instrument unit serial number(AERIunitNumber)