SGP/AERI/C1 - Missing data

Data are missing and unrecoverable.

• Spare temperature sensor (location TBD)(spareTemp)
• Signal conditioning electronics inside air temperature(SCETemp)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Observation latitude(Latitude)
• Julian Day including day and fraction of day(JulianDay)
• Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
• Time (HHMMSS)(timeHHMMSS)
• Observation Altitude(Altitude)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Dummy altitude for Zeb(alt)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• lat(lat)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2Temp)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
• wavenumbers for standard deviation of radiance spectra(wnum2)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Ambient blackbody temperature(ABBbottomTemp)
• Stirling cycle cooler current(coolerCurrent)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• AERI ingest computer temperature measured at back panel of computer(computerTemp)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Observation longitude(Longitude)
• AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Time offset of tweaks from base_time(time_offset)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• Scene mirror position encoder value(sceneMirPosEncoder)
• lon(lon)
• Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Wave number(wnum)
• Detector temperature sensed via diode near detector(detectorTemp)
• Hot blackbody temperature - apex(HBBapexTemp)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• base time(base_time)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1Temp)
• Time at center of AERI sky observation period(Time)
• Mean of radiance spectra ensemble(mean_rad)
• Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)

• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBviewStdDevRadiance985_990)
• Radiance standard deviation during hot blackbody view averaged over (2282_2287
  cm-1)(HBBViewStdDevRadiance2282_2287)
• Time offset of tweaks from base_time(time_offset)
• AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENEstimateNo1Ch2)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
• Observation latitude(Latitude)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• Shortwave window radiance average (2510_2515 cm-1)(shortwaveWindowRadiance2510_2515)
• Radiance standard deviation during hot blackbody view averaged over (2282_2287
  cm-1)(HBBviewStdDevRadiance2282_2287)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the sky view(HBBtempDrift)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
• Scene mirror position encoder value(sceneMirPosEncoder)
• Dummy altitude for Zeb(alt)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• AERI ingest computer temperature measured at back panel of computer(computerTemp)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Observation Altitude(Altitude)
• Wave number in reciprocal centimeters(wnumsum12)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Radiance standard deviation during hot blackbody view averaged over (985_990
  cm-1)(HBBviewStdDevRadiance985_990)
• Ambient blackbody temperature(ABBbottomTemp)
• Radiance standard deviation during ambient blackbody view averaged over
  (2282_2287 cm-1)(ABBviewStdDevRadiance2282_2287)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2Temp)
• Factor used to convert single-scan noise to two-minute equivalent(twoMinuteNoiseEstimateFactor)
• Longwave window radiance average (985_990 cm-1)(longwaveWindowRadiance985_990)
• Radiance standard deviation during hot blackbody view averaged over (700_705
  cm-1)(HBBviewStdDevRadiance700_705)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false)(LWskyNENAcceptable)
• Wave number in reciprocal centimeters(wnumsum13)
• Radiance standard deviation during ambient blackbody view averaged over (700_705
  cm-1)(ABBViewStdDevRadiance700_705)
• lat(lat)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Radiance standard deviation during sky view averaged over (2510_2515 cm-1)(skyViewStdDevRadiance2510_2515)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Longwave radiance average (700_705 cm-1) Elevated Air(elevatedLayerRadiance700_705)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• lon(lon)
• Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• AERI SW Scene Radiance Spectral Averages (Ch2)(SkyRadianceSpectraAveragesCh2)
• Hot blackbody temperature - apex(HBBapexTemp)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBViewStdDevRadiance985_990)
• Radiance standard deviation during hot blackbody view averaged over (675_680
  cm-1)(HBBViewStdDevRadiance675_680)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
• AERI LW Scene NESR Spectral Averages (Ch1)(SkyNENCh1)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Signal conditioning electronics inside air temperature(SCEtemp)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyVariabilityAveragesCh2)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false)(HBBStable)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyVariabilityAveragesCh1)
• Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
• Radiance standard deviation during ambient blackbody view averaged over (700_705
  cm-1)(ABBviewStdDevRadiance700_705)
• Detector temperature sensed via diode near detector(detectorTemp)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Radiance standard deviation during ambient blackbody view averaged over
  (2510_2515 cm-1)(ABBViewStdDevRadiance2510_2515)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Wave number in reciprocal centimeters(wnumsum5)
• Radiance standard deviation during hot blackbody view averaged over (675_680
  cm-1)(HBBviewStdDevRadiance675_680)
• AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENEstimateNo2Ch2)
• Observation longitude(Longitude)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Wave number in reciprocal centimeters(wnumsum3)
• Radiance standard deviation during hot blackbody view averaged over (2510_2515
  cm-1)(HBBviewStdDevRadiance2510_2515)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Wave number in reciprocal centimeters(wnumsum4)
• AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectraAveragesCh2)
• Radiance standard deviation during ambient blackbody view averaged over
  (2295_2300 cm-1)(ABBviewStdDevRadiance2295_2300)
• Longwave window brightness temperature from radiance average (985_990 cm-1)(longwaveWindowAirTemp985_990)
• AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectraAveragesCh1)
• AERI LW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch1)(HBB2minNENEstimateNo2Ch1)
• Wave number in reciprocal centimeters(wnumsum6)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• Wave number in reciprocal centimeters(wnumsum2)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Radiance standard deviation during ambient blackbody view averaged over (675_680
  cm-1)(ABBviewStdDevRadiance675_680)
• Stirling cycle cooler current(coolerCurrent)
• Radiance standard deviation during hot blackbody view averaged over (2510_2515
  cm-1)(HBBViewStdDevRadiance2510_2515)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Shortwave radiance average (2295_2300 cm-1) Surface Air(surfaceLayerRadiance2295_2300)
• Radiance standard deviation during hot blackbody view averaged over (2295_2300
  cm-1)(HBBViewStdDevRadiance2295_2300)
• AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
• Signal conditioning electronics inside air temperature(SCETemp)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Time (HHMMSS)(timeHHMMSS)
• Radiance standard deviation during hot blackbody view averaged over (985_990
  cm-1)(HBBViewStdDevRadiance985_990)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm-1(SWskyNEN)
• base time(base_time)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Radiance standard deviation during sky view averaged over (985_990 cm-1)(skyViewStdDevRadiance985_990)
• Time at center of AERI sky observation period(Time)
• Shortwave radiance average (2282_2287 cm-1) Elevated Air(elevatedLayerRadiance2282_2287)
• Radiance standard deviation during sky view averaged over (2295_2300 cm-1)(skyViewStdDevRadiance2295_2300)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Radiance standard deviation during hot blackbody view averaged over (2295_2300
  cm-1)(HBBviewStdDevRadiance2295_2300)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Wave number in reciprocal centimeters(wnumsum7)
• Logical flag indicating whether hatch is open (true) or not open (false)(hatchOpen)
• Radiance standard deviation during hot blackbody view averaged over (700_705
  cm-1)(HBBViewStdDevRadiance700_705)
• AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
• Wave number in reciprocal centimeters(wnumsum1)
• AERI LW Scene Brightness Temp Spectral Averages (Ch1)(SkyBrightnessTempSpectralAveragesCh1)
• Wave number in reciprocal centimeters(wnumsum8)
• Radiance standard deviation during ambient blackbody view averaged over
  (2295_2300 cm-1)(ABBViewStdDevRadiance2295_2300)
• Radiance standard deviation during ambient blackbody view averaged over (675_680
  cm-1)(ABBViewStdDevRadiance675_680)
• Radiance standard deviation during ambient blackbody view averaged over
  (2282_2287 cm-1)(ABBViewStdDevRadiance2282_2287)
• AERI SW Scene Brightness Temp Spectral Averages (Ch2)(SkyBrightnessTempSpectralAveragesCh2)
• Wave number in reciprocal centimeters(wnumsum10)
• Wave number in reciprocal centimeters(wnumsum11)
• Julian Day including day and fraction of day(JulianDay)
• Wave number in reciprocal centimeters(wnumsum9)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false)(SWskyNENAcceptable)
• AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectraAveragesCh1)
• Radiance standard deviation during ambient blackbody view averaged over
  (2510_2515 cm-1)(ABBviewStdDevRadiance2510_2515)
• Wave number in reciprocal centimeters(wnumsum14)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1Temp)
• AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENEstimateNo1Ch1)

• Observation Altitude(Altitude)
• Mean of radiance spectra ensemble(mean_rad)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2temp)
• Spare temperature sensor (location TBD)(spareTemp)
• Dummy altitude for Zeb(alt)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Ambient blackbody temperature(ABBbottomTemp)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• base time(base_time)
• Time at center of AERI sky observation period(Time)
• Hot blackbody temperature - apex(HBBapexTemp)
• Observation relative humidity at AERI blackbodies(atmosphericRelativeHumidity)
• Standard deviation of radiance spectra ensemble(standard_dev_mean_rad)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Observation latitude(Latitude)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• Resistive temperature of 2500 Ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Wave number(wnum)
• Stirling cycle cooler current(coolerCurrent)
• Ambient blackbody temperature - apex(ABBapexTemp)
• AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2Temp)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Time offset of tweaks from base_time(time_offset)
• Electronics rack ambient temperature measured at inside top of rack(rackAmbientTemp)
• Observation longitude(Longitude)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Scene mirror position encoder value(sceneMirPosEncoder)
• lat(lat)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1Temp)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1temp)
• Time (HHMMSS)(timeHHMMSS)
• BB Support Structure Temperature(BBsupportStructureTemp)
• AERI ingest computer temperature measured at back panel of computer(computerTemp)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Julian Day including day and fraction of day(JulianDay)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Signal conditioning electronics inside air temperature(SCETemp)
• wavenumbers for standard deviation of radiance spectra(wnum2)
• Detector temperature sensed via diode near detector(detectorTemp)
• lon(lon)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)

• Engineering channel 1 data(engineeringChannel1data)
• Observation latitude(Latitude)
• Engineering channel 1 raw counts(engineeringChannel1Counts)
• Thermistor input channel number 20 (counting from 0) equivalent temperature(thermistor20)
• Temperature standard deviation for thermistor channel 23(tempStdDevThermistor23)
• lon(lon)
• Relative Humidity at Site in Percent(rawAtmosphericRelativeHumidity)
• base time(base_time)
• Julian Day including day and fraction of day(JulianDay)
• Standard deviation of AERI relative humidity in counts(countsStdDevRelativeHumidity)
• Thermistor input channel number 19 (counting from 0) equivalent temperature(thermistor19)
• Temperature standard deviation for thermistor channel 22(tempStdDevThermistor22)
• Temperature standard deviation for thermistor channel 18(tempStdDevThermistor18)
• Temperature standard deviation for thermistor channel 21(tempStdDevThermistor21)
• Spare temperature sensor (location TBD)(spareTemp)
• Engineering channel 1 data(engineeringChannel1Data)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Thermistor input channel number 21 (counting from 0) equivalent temperature(thermistor21)
• Engineering channel 0 data(engineeringChannel0Data)
• Temperature standard deviation for thermistor channel 8(tempStdDevThermistor8)
• Thermistor input channel number 22 (counting from 0) equivalent temperature(thermistor22)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Temperature standard deviation for thermistor channel 9(tempStdDevThermistor9)
• Temperature standard deviation for thermistor channel 19(tempStdDevThermistor19)
• Temperature standard deviation for thermistor channel 7(tempStdDevThermistor7)
• Engineering channel 1 raw counts(engineeringChannel1counts)
• Temperature standard deviation for thermistor channel 12(tempStdDevThermistor12)
• Temperature standard deviation for thermistor channel 3(tempStdDevThermistor3)
• Temperature standard deviation for thermistor channel 13(tempStdDevThermistor13)
• Temperature standard deviation for thermistor channel 6(tempStdDevThermistor6)
• Time at center of AERI sky observation period(Time)
• Thermistor input channel number 18 (counting from 0) equivalent temperature(thermistor18)
• Engineering channel 2 data(engineeringChannel2data)
• Temperature standard deviation for thermistor channel 11(tempStdDevThermistor11)
• Thermistor input channel number 17 (counting from 0) equivalent temperature(thermistor17)
• Temperature standard deviation for thermistor channel 10(tempStdDevThermistor10)
• Thermistor input channel number 23 (counting from 0) equivalent temperature(thermistor23)
• Thermistor input channel number 16 (counting from 0) equivalent temperature(thermistor16)
• Temperature standard deviation for thermistor channel 2(tempStdDevThermistor2)
• Temperature standard deviation for thermistor channel 4(tempStdDevThermistor4)
• Dummy altitude for Zeb(alt)
• Temperature standard deviation for thermistor channel 5(tempStdDevThermistor5)
• ABB #2(thermistor7)
• Engineering channel 2 data(engineeringChannel2Data)
• ABB #1(thermistor5)
• Hatch Closed Indicator(thermistor10)
• Observation Altitude(Altitude)
• Standard deviation of AERI pressure in counts(countsStdDevPressure)
• Temperature standard deviation for thermistor channel 20(tempStdDevThermistor20)
• Hatch Open Indicator(thermistor3)
• Fixed Resistor #1 (2.6774K Ohms)(thermistor9)
• HBB #1(thermistor4)
• Time (HHMMSS)(timeHHMMSS)
• Temperature standard deviation for thermistor channel 17(tempStdDevThermistor17)
• Temperature standard deviation for thermistor channel 15(tempStdDevThermistor15)
• Temperature standard deviation for thermistor channel 14(tempStdDevThermistor14)
• HBB #2(thermistor6)
• Temperature standard deviation for thermistor channel 16(tempStdDevThermistor16)
• Engineering channel 2 raw counts(engineeringChannel2counts)
• Temperature standard deviation for thermistor channel 0(tempStdDevThermistor0)
• Electronics Air(thermistor8)
• Temperature standard deviation for thermistor channel 1(tempStdDevThermistor1)
• Thermistor input channel number 14 (counting from 0) equivalent temperature(thermistor14)
• Time offset of tweaks from base_time(time_offset)
• lat(lat)
• Thermistor input channel number 15 (counting from 0) equivalent temperature(thermistor15)
• Observation longitude(Longitude)
• Mirror position encoder value(rawMirrorPositionEncoder)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Engineering channel 0 raw counts(engineeringChannel0Counts)
• Engineering channel 2 raw counts(engineeringChannel2Counts)
• Outside Air(thermistor11)
• Reflected Temperature(thermistor2)
• Engineering channel 0 data(engineeringChannel0data)
• Spare #1(thermistor12)
• Ambient Air near BBs(thermistor0)
• Spare #2(thermistor13)
• Logical flag indicating that a data record is missing (true/false(missingDataFlag)
• MB100 2nd Port(thermistor1)
• Engineering channel 0 raw counts(engineeringChannel0counts)
• Barometric Pressure at Site in Millibars(rawAtmosphericPressure)

• Number of cloudy observations in ensemble(nobs_mpl_cbh)
• Dummy altitude for Zeb(alt)
• Number of clear observations in ensemble(nobs_cloud3_clear)
• Number of foggy observations in ensemble (probably condensation on the window)(nobs_mpl_foggy)
• Standard deviation of vap ensemble(sdev_vap)
• Retrieved profile sample time minus sonde launch time(sonde_offset_time)
• Average of brightness temperatures calculated from AERI radiances within
  spectral window for channel 2: [2506.20,2511.02](mean_AERI_BT_channel_2)
• Standard deviation of 23tbsky ensemble(sdev_23tbsky_large)
• Standard deviation of 31tbsky ensemble(sdev_31tbsky)
• Standard deviation of mpl_cbh ensemble(sdev_mpl_cbh)
• Integrated vapor column from sonde using MWR Instrument Performance Model (IPM)(integ_vap_sonde)
• Cloud detection flag from sgpaerilblcloudsC1.c1(nonclear_flag)
• Ensemble average of first cloud base height from the Belfort ceilometer(mean_cloud1_cbh)
• Ensemble average of ratios of direct_norm_broadband divided by
  diffuse_hemisp_broadband from the SIROS(mean_dir_by_diff_ratio)
• Number of cloudy observations in ensemble(nobs_cloud1_cbh)
• lon(lon)
• Time offset of tweaks from base_time(time_offset)
• Number of observations in each MWR ensemble (23tbsky, 31tbsky, vap, liq)(nobs_mwr_ensembles)
• Standard deviation of the average radiance in the 2510-2515 wavenumber window
  during the AERI dwell time(aeri_dwell_atm_var_channel_2)
• Cloud base height from the MPL(mean_mpl_cbh)
• Number of observations in each `large` MWR ensemble (23tbsky and 31tbsky)(nobs_mwr_ensembles_large)
• Standard deviation of the average radiance in the 985-990 wavenumber window
  during the AERI dwell time(aeri_dwell_atm_var_channel_1)
• Number of clear observations in ensemble(nobs_mpl_clear)
• Standard deviation of ratio ensemble about mean_dir_to_diff_ratio(sdev_dir_by_diff_ratio)
• Serial number for the sonde used at this time.(sonde_serial_number)
• Average IR temperature from the IRT (on the MWR)(mean_irt)
• Ensemble average of second cloud base height from the Belfort ceilometer(mean_cloud2_cbh)
• Ensemble average of third cloud base height from the Belfort ceilometer(mean_cloud3_cbh)
• AERI sample time minus WSI image time(wsi_offset_time)
• Ensemble average of 23.8 GHz sky brightness temperature from the MWR(mean_23tbsky)
• Number of cloudy observations in ensemble(nobs_cloud2_cbh)
• Data quality flag for MPL cbh ensemble(mpl_cbh_dq_flag)
• Number of clear observations in ensemble(nobs_cloud2_clear)
• base time(base_time)
• lat(lat)
• Standard deviation of cloud1 ensemble(sdev_cloud1_cbh)
• Standard deviation of 31tbsky ensemble(sdev_31tbsky_large)
• Number of ratios in ensemble(nobs_dir_by_diff_ratio)
• Cloud base height estimate from the field mean_AERI_BT_channel_1(cbh_AERI_channel_1)
• Calculated cloud cover fraction from the WSI(cloud_cover_fract)
• Standard deviation of the IR temperature ensemble(sdev_irt)
• Ensemble average of total water vapor along LOS path from the MWR(mean_vap)
• Average total liquid water along LOS path from the MWR(mean_liq)
• Standard deviation of 23tbsky ensemble(sdev_23tbsky)
• Cloud base height estimate from the field mean_AERI_BT_channel_2(cbh_AERI_channel_2)
• Standard deviation of liq ensemble(sdev_liq)
• Number of cloudy observations in ensemble(nobs_cloud3_cbh)
• Calculated cloud cover fraction from the WSI(cloud_cover_frac)
• IR temperature calculated from the AERI spectral response function used to
  mimick the output from the IR thermometer on the MWR(calculated_irt)
• Calculated number of clouds in WSI image(num_cloud)
• Average of brightness temperatures calculated from AERI radiances within
  spectral window for channel 1: [1142.20,1147.03](mean_AERI_BT_channel_1)
• Standard deviation of cloud2 ensemble(sdev_cloud2_cbh)
• Standard deviation of cloud3 ensemble(sdev_cloud3_cbh)
• Binary field indicating which inputs are available and used to set the
  nonclear_flag(nonclear_inputs)
• Ensemble average of 31.4 GHz sky brightness temperature from the MWR(mean_31tbsky)
• Number of clear observations in ensemble(nobs_cloud1_clear)