Data Quality Reports for Session: 130837 User: jzb Completed: 11/10/2010


TABLE OF CONTENTS

DQR IDSubjectData Streams Affected
D020927.1SGP/ARSCL/C1 - ARSCL Cloud Bases and Low-level reflectivitiessgparscl1clothC1.c1, sgparsclbnd1clothC1.c1, sgparsclcbh1clothC1.c1
D100519.1SGP/ARSCL/C1 - Ceilometer not used during processingsgparscl1clothC1.c1, sgparsclbnd1clothC1.c1, sgparsclcbh1clothC1.c1


DQRID : D020927.1
Start DateStart TimeEnd DateEnd Time
12/01/1996000002/04/20002359
Subject:
SGP/ARSCL/C1 - ARSCL Cloud Bases and Low-level reflectivities
DataStreams:sgparscl1clothC1.c1, sgparsclbnd1clothC1.c1, sgparsclcbh1clothC1.c1
Description:
Prior to February 4, 2000, the ARSCL data set incorporated data from the
Beaufort Laser Ceilometer as one of its inputs.  Because of the BLC's
high spatial resolution, this data was often chosen by ARSCL as the
"CloudBaseBestEstimate" for boundary layer clouds. It was subsequently
determined that the BLC cloud base was biased, with the BLC reporting
cloud base heights that are 122 meters too high.

The bias error will be corrected when the entire ARSCL data set is
reprocessed as part of release_4.  (The release version number is included
the the netCDF global comments).   This reprocessing will also include a
small correction the the MMCR near-field reflectivities.  This correction
is less than 1 dB except for hydrometers within 200 meters of the surface.

Thanks to Roger Marchand for helping bracket this problem.
Measurements:sgparsclbnd1clothC1.c1:
  • CloudBase, Best estimate(CloudBaseBestEstimate)

sgparscl1clothC1.c1:
  • BLC/VCEIL Clothiaux et al. Algorithm Cloud Base Height(CloudBaseCeilometerCloth)
  • Cloud, reflectivity, at altitude(Reflectivity)
  • MMCR Reflectivity, Best estimate, Hydrometer(ReflectivityBestEstimate)
  • BLC/VCEIL Standard Algorithm Cloud Base Height(CloudBaseCeilometerStd)
  • CloudBase, Best estimate(CloudBaseBestEstimate)

sgparsclcbh1clothC1.c1:
  • BLC/VCEIL Clothiaux et al. Algorithm Cloud Base Height(CloudBaseCeilometerCloth)
  • BLC/VCEIL Standard Algorithm Cloud Base Height(CloudBaseCeilometerStd)


Back To Table of Contents

DQRID : D100519.1
Start DateStart TimeEnd DateEnd Time
11/20/2009000012/31/20092359
Subject:
SGP/ARSCL/C1 - Ceilometer not used during processing
DataStreams:sgparscl1clothC1.c1, sgparsclbnd1clothC1.c1, sgparsclcbh1clothC1.c1
Description:
The ceilometer was not used during processing due to a ceilometer data format change that 
ARSCL did not handle properly.  As a result, cloud boundaries in the lowest several 
kilometers may be less accurate than usual, as they are based solely on the micropulse lidar 
and millimeter cloud radar.
Measurements:sgparsclbnd1clothC1.c1:
  • CloudBase, Best estimate(CloudBaseBestEstimate)

sgparscl1clothC1.c1:
  • BLC/VCEIL Clothiaux et al. Algorithm Cloud Base Height(CloudBaseCeilometerCloth)
  • BLC/VCEIL Standard Algorithm Cloud Base Height(CloudBaseCeilometerStd)
  • CloudBase, Best estimate(CloudBaseBestEstimate)

sgparsclcbh1clothC1.c1:
  • BLC/VCEIL Clothiaux et al. Algorithm Cloud Base Height(CloudBaseCeilometerCloth)
  • BLC/VCEIL Standard Algorithm Cloud Base Height(CloudBaseCeilometerStd)


Back To Table of Contents



END OF DATA