| DQR ID | Subject | Data Streams Affected |
|---|---|---|
| D020823.20 | NSA/AERI/C1 - AERI Detector Cooler Failure | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D020823.21 | NSA/AERI/C1 - Data Spikes due to power outage | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D020823.23 | NSA/AERI/C1 - Data Suspect Due to Instrument Maintenance | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D020823.25 | NSA/AERI/C1 - Loss of Temperature Stabilization | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D020823.26 | NSA/AERI/C1 - Data discontinuous | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D020823.27 | NSA/AERI/C1 - External Temperature Sensor Failed | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D021113.6 | NSA/AERI/C1 - AERI extended range detector at Barrow | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D030203.1 | NSA/AERI/C1 - Failure of AERI cryogenic cooler | nsaaeriC1.00, nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D030203.2 | NSA/AERI/C1 - Failure of AERI cryogenic cooler | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| D040909.1 | NSA/AERI/C1 - Data file header manipulated | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 10/18/2001 | 0000 | 10/24/2001 | 2359 |
| Subject: | NSA/AERI/C1 - AERI Detector Cooler Failure |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | .The data is very noisy due to failure of the detector cooler to keep the detector at the set temperature. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 08/19/1999 | 1830 | 08/19/1999 | 2000 |
| Subject: | NSA/AERI/C1 - Data Spikes due to power outage |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | Spike in continuous data record from a power outage. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 12/08/1999 | 0000 | 12/11/1999 | 2359 |
| Subject: | NSA/AERI/C1 - Data Suspect Due to Instrument Maintenance |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | Conner and Ralph worked on the AERI during this week, so the data quality is questionable during this time period. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 04/19/2001 | 1700 | 04/30/2001 | 2359 |
| Subject: | NSA/AERI/C1 - Loss of Temperature Stabilization |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | Instrument lost temperature stabilization on 4/19 @ 1700 and data became very noisy and was shut down at 2300 (GMT). Turned back on 4/21 still look like detector temperature is to high, data very noisy. Production of good data resumed on 05/01/01. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 08/20/1999 | 1600 | 08/20/1999 | 2359 |
| Subject: | NSA/AERI/C1 - Data discontinuous |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | Large unreasonable step in continous data record with slow progression toward original state. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 10/16/1999 | 0000 | 12/10/1999 | 2359 |
| 09/07/2001 | 0000 | 09/09/2001 | 2359 |
| 10/28/2001 | 0130 | 10/28/2001 | 0200 |
| Subject: | NSA/AERI/C1 - External Temperature Sensor Failed |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | There appear to have been some problem with the external temperature sensor. The outside temperature sensor data is not used in the derivation of the spectral IR data and are just a diagnostic tool. We have not found what caused this behaviour. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaeriengineerC1.a1:
nsaaerich1C1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 04/18/2002 | 0132 | 05/16/2002 | 1830 |
| Subject: | NSA/AERI/C1 - AERI extended range detector at Barrow |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | The extended range detector had failed and a borrowed replacement detector was installed. The replacement detector had enough air present in the dewar to cause the cryogenic cooler to work at full current. The detector was still warmer than optimal and there is more noise present in the data than is considered normal. The data must be used with discretion. The system was shut off on 020516 due to noise and rising detector temperatures. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 01/20/2003 | 1835 | 01/25/2003 | 0041 |
| Subject: | NSA/AERI/C1 - Failure of AERI cryogenic cooler |
| DataStreams: | nsaaeriC1.00, nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | Failure of the cryogenic cooler for the AERI detector resulted in the instrument being shut down during the interval January 20, 2003 @1835GMT until January 25, 2003 @0041GMT, when a new cryogenic cooler was installed. All data are missing for this period. Data after the new cooler was installed are within normal acceptable limits. |
| Measurements: | nsaaeriC1.00:
nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 01/17/2003 | 1749 | 01/20/2003 | 1835 |
| Subject: | NSA/AERI/C1 - Failure of AERI cryogenic cooler |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | In January 2003, the cryogenic cooler current for the Barrow, AERI detector was steadily increasing. This increase is a sign of cooler failure. On January 16,2003, the cooler began to make noise. The cooler was shut-off on January 17,2003 and any condensed gases were allowed to vent. Condensed gases in the detector dewar cause a cooler to work harder and increase the current. The cooler was then resealed and turned on. However, the cooler did not recover and the current was at a maximum. The cooler was unable to completely cool the detector and the detector never achieved a temperature below 72K. Higher detector temperature increases instrument noise. The instrument was shut off on January 20, 2003 at 1835GMT to prevent a catatrophic failure due to complete cooler failure and repressurization of the detector dewar, which would result in a subsequent implosion of the dewar. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|
| Start Date | Start Time | End Date | End Time |
|---|---|---|---|
| 03/21/1999 | 0000 | 03/21/1999 | 2359 |
| 03/24/1999 | 0000 | 03/24/1999 | 2359 |
| Subject: | NSA/AERI/C1 - Data file header manipulated |
| DataStreams: | nsaaerich1C1.a1, nsaaerich2C1.a1, nsaaerisummaryC1.a1, nsaaeriengineerC1.a1 |
| Description: | The NSA.C1 AERI data for 19990321 and 19990324 were processed on July 23, 2004 using version 1.24 of the ingest. This resulted in the creation of .b1 level data files. Because the other March 1999 data are .a1 level data files, the .b1 files were modified using nc_tools (nc_copy, ncvarrename, ncattcopy) to create .a1 level data files. The data in the files were not changed in anyway. Only header modifications were made. The user may notice small header differences between these files and others from March 1999. |
| Measurements: | nsaaerich2C1.a1:
nsaaerisummaryC1.a1:
nsaaerich1C1.a1:
nsaaeriengineerC1.a1:
|