DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D140205.1 | TMP/MET/M1 - ORG not functional | tmpmetM1.b1 | Incorrect |
D140326.5 | TMP/MET/M1 - Wind sensor siting not ideal | tmpmetM1.b1 | Does not affect quality |
D141016.3 | TMP/AOSMET/S1 - Settings for wind measurements | tmpaosmetS1.a1 | Does not affect quality |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/23/2014 | 0000 | 01/31/2014 | 2200 | Incorrect |
02/04/2014 | 0740 | 02/04/2014 | 0750 | Incorrect |
Subject: | TMP/MET/M1 - ORG not functional |
DataStreams: | tmpmetM1.b1 |
Description: | Optical rain gauge was not reporting precipitation until 1/31. Precipitation recorded at 7:40gmt on 2/4 is not representative of conditions (sensor test). |
Measurements: | tmpmetM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
01/23/2014 | 0000 | 09/13/2014 | 2359 | Does not affect quality |
Subject: | TMP/MET/M1 - Wind sensor siting not ideal |
DataStreams: | tmpmetM1.b1 |
Description: | According to the manual, the wind sensor should ideally be mounted higher than any object within a 300 meter radius. This particular site is bordered by approximately 20 meter tall trees (the wind sensor is mounted at 10 meters) from about due west to south/southeast, at a distance approximately 60 meters or less. Please reference the instrument handbook or contact the mentor for more information. |
Measurements: | tmpmetM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
09/25/2013 | 1800 | 09/13/2014 | 0900 | Does not affect quality |
Subject: | TMP/AOSMET/S1 - Settings for wind measurements |
DataStreams: | tmpaosmetS1.a1 |
Description: | Settings for the WXT520 Weather Transmitter were changed may not be as users might expect. The wind speed and direction was read and recorded every second, but the averaging time was 3 seconds, not the second of the time stamp. The wind speed was calculated as Gust & lull, instead of traditional Max/Min values. |
Measurements: | tmpaosmetS1.a1:
|