DQR ID | Subject | Data Streams Affected | Data Quality Metric |
---|---|---|---|
D150417.1 | OLI/MWR3C/M1 - Missing data | olimwr3cM1.b1 | Missing |
D150417.8 | OLI/ECOR/M1 - Missing data | oli30ecorM1.b1 | Missing |
D150417.9 | OLI/MWR3C/M1 - Missing data | olimwr3cM1.b1 | Missing |
D150422.2 | OLI/ECOR/M1 - Data missing | oli30ecorM1.b1 | Missing |
D150422.3 | OLI/SEBS/M1 - Wetness measurement incorrect | olisebsM1.b1 | Incorrect |
D150424.6 | OLI/MWR3C/M1 - Missing data | olimwr3cM1.b1 | Missing |
D150515.7 | OLI/ECOR/M1 - Pressure and IRGA Temperature Missing | oli30ecorM1.b1 | Missing |
D150626.4 | OLI/SEBS/M1 - Wetness Detector Lower Limit Exceeded | olisebsM1.b1 | Suspect |
D151016.1 | OLI/KAZR/M1 - Clutter Filter On | olikazrgeM1.a1, olikazrmdM1.a1 | Does not affect quality |
D160122.8 | OLI/MWR3C/M1 - Incorrect surface T/RH | olimwr3cM1.b1 | Incorrect |
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/14/2015 | 1255 | 04/15/2015 | 1754 | Missing |
Subject: | OLI/MWR3C/M1 - Missing data |
DataStreams: | olimwr3cM1.b1 |
Description: | Missing data |
Measurements: | olimwr3cM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/30/2015 | 2000 | 04/01/2015 | 1800 | Missing |
Subject: | OLI/ECOR/M1 - Missing data |
DataStreams: | oli30ecorM1.b1 |
Description: | All data missing. |
Measurements: | oli30ecorM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
03/30/2015 | 1900 | 04/01/2015 | 1912 | Missing |
Subject: | OLI/MWR3C/M1 - Missing data |
DataStreams: | olimwr3cM1.b1 |
Description: | Data are missing because of a power outage. |
Measurements: | olimwr3cM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/19/2015 | 1230 | 04/21/2015 | 1800 | Missing |
Subject: | OLI/ECOR/M1 - Data missing |
DataStreams: | oli30ecorM1.b1 |
Description: | All data missing because of a power outage. |
Measurements: | oli30ecorM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/19/2015 | 1300 | 04/21/2015 | 1730 | Incorrect |
Subject: | OLI/SEBS/M1 - Wetness measurement incorrect |
DataStreams: | olisebsM1.b1 |
Description: | The wetness measurement is incorrect because battery voltage too low to support the measurement by the sensor. |
Measurements: | olisebsM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/19/2015 | 1300 | 04/22/2015 | 1535 | Missing |
Subject: | OLI/MWR3C/M1 - Missing data |
DataStreams: | olimwr3cM1.b1 |
Description: | Data are missing because of a power outage |
Measurements: | olimwr3cM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
07/16/2014 | 1900 | 04/30/2015 | 2230 | Missing |
Subject: | OLI/ECOR/M1 - Pressure and IRGA Temperature Missing |
DataStreams: | oli30ecorM1.b1 |
Description: | The missing pressure and IRGA temperature measurements do not affect the fluxes. |
Measurements: | oli30ecorM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
12/31/2014 | 0300 | 09/12/2015 | 2030 | Suspect |
Subject: | OLI/SEBS/M1 - Wetness Detector Lower Limit Exceeded |
DataStreams: | olisebsM1.b1 |
Description: | The wetness detector lower limit sometimes goes below the minimum limit of 1.0. However, any measurement below 1.0 still indicates that the sensor is wet. |
Measurements: | olisebsM1.b1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
04/15/2015 | 0000 | 10/10/2015 | 1900 | Does not affect quality |
Subject: | OLI/KAZR/M1 - Clutter Filter On |
DataStreams: | olikazrgeM1.a1, olikazrmdM1.a1 |
Description: | The clutter filter was on during this period. The shift in background noise level on 10/10/2015 is resultant from switching the filter off. |
Measurements: | olikazrgeM1.a1:
olikazrmdM1.a1:
|
Start Date | Start Time | End Date | End Time | Data Quality Metric |
---|---|---|---|---|
02/19/2015 | 2200 | 01/21/2016 | 1613 | Incorrect |
Subject: | OLI/MWR3C/M1 - Incorrect surface T/RH |
DataStreams: | olimwr3cM1.b1 |
Description: | The surface temperature, pressure and relative humidity are incorrect. |
Measurements: | olimwr3cM1.b1:
|