DQRID : D970624.2
Start DateStart TimeEnd DateEnd Time Data Quality Metric
06/21/1997202706/21/19972027Suspect
more
Subject:
Incorrect surface values
DataStreams:sgpsondewrpnC1.a1
Description:
DQR No:                               Platform:  sgpsondeC1

Subject:        Incorrect surface values sounding 970621:2027

Date Submitted: 6/23/97
Submitted By:   Barry Lesht           _X_  Instrument Mentor
                                      ___  EST Member
                                      ___  Science Team Member
                                      ___  Other _____________________________
 
For questions or problems, please contact the ARM Experiment Center at
509-375-6898 or via email at dqr@arm.gov.

Platform/Measurement: sgpsondewrpnc1
    What level data: (raw,a0,a1,b1,c1 etc): all

    What location was the data collected at: SGP/CF
 
    Period of time in question
        Begin Date  6/21/97    Time   20:27    (GMT)
        End Date               Time            (GMT)

 Data should be labeled:
 ___  questionable                      ___  All data fields affected
 _X_  incorrect                         _X_  Only some data fields affected
 ___  wrong calibration
 ___  others 
 
 Discussion of Problem:

Site operations reports that incorrect surface values were entered into
the subject sounding.  Instead of 972.3, 33.7, and 46 the surface pressure,
temperature, and humidity values should have been 971.8, 33.3, and 47.

The incorrect surface pressure will result in incorrect altitudes throughout
the profile and incorrect ascent rate values during the first 30 seconds.
The effects of the incorrect temperature and relative humidty values should
be negligable.
 
Other observations/measurements impacted by this problem:


Suggested Corrections of the Problem: (e.g. change calibration factor and
recompute, flag data with this comment, etc.)

Flag data.
Suggestions: 
Measurements:sgpsondewrpnC1.a1:
  • v_wind
  • wstat
  • lat
  • base_time
  • alt
  • dp
  • tdry
  • lon
  • deg
  • asc
  • rh
  • wspd
  • u_wind
  • time_offset
  • pres
more

Close this window