DQRID : D120302.2
Start DateStart TimeEnd DateEnd Time Data Quality Metric
06/14/2011173001/04/20122045Does not affect quality
more
Subject:
SGP/SIRS/C1 - Reprocessing Notice (RID 734)
DataStreams:sgpsirsC1.b1, sgpsirs20sC1.a0
Description:
See below for details of reprocessing that was completed on 201410/24. Original DQR 
category: 4 (Red, Incorrect).

-----------------------------------------------------------

Calibration coefficient for downwelling longwave was incorrect for the specified period.

To correct the one minute data b1 datastream follow the procedure below:
1) Obtain the following variables from the 20s datastream for each one minute of the 
affected time range:
  inst_down_long_shaded_dome_resist (Rd)
  inst_down_long_shaded_case_resist (Rc)
  inst_down_long_hemisp_shaded_tp (tpDIR_mV)
                                         
2) using the 20s tp voltage in mV convert to uV.
  tpDIR[uV] = inst_down_long_hemisp_shaded_tp[mV]*1000[uV/mV]

3) For each 20s data entry convert Rd and Rc to temperature
  Td =1/ (a0 + (a1*LN (Rd*1000) + (a2*LN (Rd*1000)^3)))
  Tc = 1/ (a0 + (a1*LN (Rc*1000) + (a2*LN (Rc*1000)^3)))
  where a0 = 0.0010295 
        a1 = 0.0002391
        a2 = 0.0000001568

4) Apply for each 20s data entry: (correct k1=0.2762)
  WinDIR(W/m2)= [0.2762*tpDIR] + Sigma*Tc^4 -4*Sigma*(Td^4 - Tc^4)
  where, Sigma = 5.6704E-8 (Stefan-Boltzman Const)
                                      
5) Generate new 1 minute average from the 3 20-second measurements
Suggestions: 
Measurements:sgpsirsC1.b1:
  • down_long_hemisp_shaded_max
  • down_long_hemisp_shaded_std
  • down_long_hemisp_shaded_min
  • inst_down_long_shaded_case_temp
  • down_long_hemisp_shaded
  • inst_down_long_shaded_dome_temp
  • down_long_netir
more
sgpsirs20sC1.a0:
  • inst_down_long_shaded_case_resist
  • inst_down_long_hemisp_shaded_tp
  • inst_down_long_shaded_dome_resist
more

Close this window