DQRID : D130102.1
Start DateStart TimeEnd DateEnd Time Data Quality Metric
09/22/2012122310/04/20121359Suspect
more
Subject:
MAG/PRP/M1 - FRSR head temperature error
DataStreams:magprpfrsrM1.a0
Description:
During the time specified (Leg2) the MFR head temperature sensor was failing 
intermittently. At times when the head_temp falls outside the normal range of 38 C to 42 C, the heater 
likely was not maintaining proper operating temperature, and the radiometric calibration 
is invalid. 

The FRSR head was replaced for Leg 3 and beyond.
Suggestions: 
Omit any data records if the head temperature is not in the 38-42C temperature range: 

head_temp < 38 or head_temp > 42.
Measurements:magprpfrsrM1.a0:
  • signal_narrowband_filter4_std
  • sweeps_hemisp_broadband
  • sweeps_hemisp_narrowband_filter6
  • sweeps_hemisp_narrowband_filter5
  • sweeps_hemisp_narrowband_filter4
  • sweeps_hemisp_narrowband_filter3
  • sweeps_hemisp_narrowband_filter2
  • sweeps_hemisp_narrowband_filter1
  • signal_narrowband_filter5_std
  • signal_narrowband_filter3_std
  • start_sweep_hemisp_narrowband_filter3
  • start_sweep_hemisp_narrowband_filter4
  • start_sweep_hemisp_narrowband_filter5
  • start_sweep_hemisp_narrowband_filter6
  • head_temp
  • shadow_ratio_std
  • signal_broadband_std
  • start_sweep_hemisp_narrowband_filter1
  • start_sweep_hemisp_narrowband_filter2
  • signal_narrowband_filter6_std
  • mean_global
  • signal_narrowband_filter2_std
  • end_sweep_hemisp_narrowband_filter1
  • end_sweep_hemisp_narrowband_filter5
  • end_sweep_hemisp_narrowband_filter4
  • end_sweep_hemisp_narrowband_filter3
  • end_sweep_hemisp_narrowband_filter2
  • signal_narrowband_filter1_std
  • end_sweep_hemisp_narrowband_filter6
  • signal_narrowband_filter2
  • signal_narrowband_filter1
  • signal_narrowband_filter4
  • signal_narrowband_filter3
  • signal_narrowband_filter6
  • signal_broadband
  • signal_narrowband_filter5
  • start_sweep_hemisp_broadband
  • shadow_ratio
  • end_sweep_hemisp_broadband
more

Close this window