| Subject: | OLI/MPL/M1 - Broken heater fan |
| DataStreams: | olimplpolfsM1.b1, olimplpolfsM1.00
|
| Description: | MPL data is not noticeably affected by the failure of the heater fan. For the time period
of the DQR, a comparison with ceilometer signal returns shows similar cloud base heights. |
| Suggestions: | Data, especially at daytime, can potentially be used. Use ceilometer data. |
| Measurements: | olimplpolfsM1.b1: - overlap_correction
- shots_per_avg
- energy_monitor
- signal_return_co_pol
- num_channels
- range_offset
- background_signal_cross_pol
- polarization_control_voltage
- deadtime_correction_counts
- num_bins
- max_altitude
- polarization_control
- background_signal_std_cross_pol
- preliminary_cbh
- detector_temp
- deadtime_correction
- mcs_mode
- dead_time_corrected
- scope_temp
- range_bin_time
- range_bins
- first_data_bin
- overlap_correction_heights
- background_signal_co_pol
- height
- laser_temp
- range
- pulse_rep
- range_bin_width
- signal_return_cross_pol
- background_signal_std_co_pol
- laser_fire_bin
more
olimplpolfsM1.00: - Raw data stream - documentation not supported
more
|