DQRID : D961122.15
Start DateStart TimeEnd DateEnd Time Data Quality Metric
07/03/1996143007/03/19961530Incorrect
06/19/1996080006/19/19961000Incorrect
07/01/1996010007/01/19960830Incorrect
07/02/1996000007/02/19960400Incorrect
07/05/1996000007/05/19960030Incorrect
07/03/1996013007/03/19960400Incorrect
06/30/1996213006/30/19962330Incorrect
07/04/1996020007/04/19960230Incorrect
06/19/1996000006/19/19960230Incorrect
07/02/1996050007/02/19961500Incorrect
06/30/1996023006/30/19961530Incorrect
07/05/1996020007/05/19960230Incorrect
more
Subject:
SGP/EBBR/E8 - Reprocess: Soil Heat Flow Sensor 2 Incorrect Data
DataStreams:sgp30ebbrE8.b1, sgp15ebbrE8.b1
Description:
Soil heat flow sensor #2 periodically outputted incorrect values during the 
period indicated.  The output often indicated large negative heat flow.  
Problems with good connections of the sensor leads have caused this problem 
in the past.  However, no maintenance was performed before the problem 
ceased on 15 July 1996.  No data is available for 20-27 and 29 July, so it is 
not known if the problem occurred during that time.

The data affected (and thus incorrect) includes:

15 minute: mv_hft2
30 minute: shf2, c_shf2, g2, ave_shf, e, h.

The dates and times (GMT) of incorrect values are listed below.  Only half 
hour times are listed.  

06/19/96  0230, 0800-1000
06/30/96  0230-1530, 2130-2330
07/01/96  0100-0830
07/02/96  0400, 0500-1500
07/03/96  0130-0400, 1430-1530
07/04/96  0200-0230
07/05/96  0030, 0230

The latent and sensible heat fluxes can be recalculated by using only soil
heat flows 1 and 3 through 5 to calculate the average soil heat flow,

ave_shf = (g1 + g3 + g4 + g5)/4

e = -(q + ave_shf)/(1 + bowen)

h = -(e + ave_shf + q)
Suggestions: 
Measurements:sgp15ebbrE8.b1:
  • soil_heat_flow_2_mv
more
sgp30ebbrE8.b1:
  • latent_heat_flux
  • surface_soil_heat_flux_2
  • sensible_heat_flux
  • corr_soil_heat_flow_2
  • soil_heat_flow_2
  • surface_soil_heat_flux_avg
more

Close this window