TWP/SMET/C1 - Wind Direction alignment method

During RESET10 we discovered a problem with wind direction from WIND1 (upper
anemometer).  During RESET8, WIND1 was corrected by rotating the alignment
ring instead of the anemometer.  This resulted in a better agreement between
the 2 anemometers, but is not the correct way to align an anemometer. The
alignment ring was readjusted for true north and the anemometer reset in
the proper slot (the original problem).

Data should be unaffected.

• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #1 direction standard deviation(wind1_dir_sd)

• Wind #1 direction standard deviation(wind1_dir_sd)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 direction vector average(wind1_dir_vec_avg)

• (Raw data stream - documentation not supported)