SGP/EBBR/E15 - 3-month Check

During EBBR 3 month checks the Automatic Exchange Mechanism is disabled
(reflected by home signals near zero) so that the two aspirator units can be
placed at the same height.  The measurements during this period, at least,
do not produce correct outputs of bowen ratio (bowen), sensible heat flux (h),
or latent heat flux (e), nor do the air temperature and relative humidity
measurements indicate gradients.  Checks performed before or after the AEM
is disabled also lead to some incorrect data.

• Top T/RH sensor temperature(temp_trh_top)
• Top air temperature(temp_air_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Top relative humidity (fractional)(rh_top_fraction)
• Bottom air temperature(temp_air_bottom)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top vapor pressure(vapor_pressure_top)
• Bottom T/RH sensor temperature(temp_trh_bottom)

• Left air temperature(temp_air_left)
• Right relative humidity (mV)(rh_right_mv)
• Left relative humidity (mV)(rh_left_mv)
• Right T/RH sensor temperature (resistance ratio)(temp_trh_right_rr)
• Right air temperature(temp_air_right)
• Left T/RH sensor temperature (resistance ratio)(temp_trh_left_rr)

• Bottom air temperature(temp_air_bottom)
• Top vapor pressure(vapor_pressure_top)
• Bowen ratio(bowen_ratio)
• Bottom vapor pressure(vapor_pressure_bottom)
• Surface latent heat flux(latent_heat_flux)
• Surface sensible heat flux(sensible_heat_flux)
• Top relative humidity (fractional)(rh_top_fraction)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Top air temperature(temp_air_top)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top T/RH sensor temperature(temp_trh_top)