SGP/EBBR/E22 - 3-month Check

During EBBR 3 month checks the Automatic Exchange Mechanism is disabled
(reflected by home signals near zero) so that the two aspirator units can be
placed at the same height.  The measurements during this period, at least,
do not produce correct outputs of bowen ratio (bowen), sensible heat flux (h),
or latent heat flux (e), nor do the air temperature and relative humidity
measurements indicate gradients.  Checks performed before or after the AEM
is disabled also lead to some incorrect data.

• Right relative humidity (mV)(rh_right_mv)
• Left air temperature(temp_air_left)
• Left T/RH sensor temperature (resistance ratio)(temp_trh_left_rr)
• Left relative humidity (mV)(rh_left_mv)
• Right air temperature(temp_air_right)
• Right T/RH sensor temperature (resistance ratio)(temp_trh_right_rr)

• Bottom T/RH sensor temperature(temp_trh_bottom)
• Top air temperature(temp_air_top)
• Bottom air temperature(temp_air_bottom)
• Top T/RH sensor temperature(temp_trh_top)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top vapor pressure(vapor_pressure_top)
• Top relative humidity (fractional)(rh_top_fraction)
• Bottom vapor pressure(vapor_pressure_bottom)

• Bottom T/RH sensor temperature(temp_trh_bottom)
• Top air temperature(temp_air_top)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Surface latent heat flux(latent_heat_flux)
• Top vapor pressure(vapor_pressure_top)
• Top T/RH sensor temperature(temp_trh_top)
• Bottom air temperature(temp_air_bottom)
• Bottom vapor pressure(vapor_pressure_bottom)
• Top relative humidity (fractional)(rh_top_fraction)
• Bowen ratio(bowen_ratio)
• Surface sensible heat flux(sensible_heat_flux)