SGP/EBBR/E4 - 3-month Check

During EBBR 3 month checks the Automatic Exchange Mechanism is disabled
(reflected by home signals near zero) so that the two aspirator units can be
placed at the same height.  The measurements during this period, at least,
do not produce correct outputs of bowen ratio (bowen), sensible heat flux (h),
or latent heat flux (e), nor do the air temperature and relative humidity
measurements indicate gradients.  Checks performed before or after the AEM
is disabled also lead to some incorrect data.

• Top air temperature(temp_air_top)
• Top relative humidity (fractional)(rh_top_fraction)
• Bottom air temperature(temp_air_bottom)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top T/RH sensor temperature(temp_trh_top)
• Surface latent heat flux(latent_heat_flux)
• Top vapor pressure(vapor_pressure_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Bowen ratio(bowen_ratio)
• Surface sensible heat flux(sensible_heat_flux)

• Bottom air temperature(temp_air_bottom)
• Top relative humidity (fractional)(rh_top_fraction)
• Top T/RH sensor temperature(temp_trh_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top air temperature(temp_air_top)
• Top vapor pressure(vapor_pressure_top)

• Right T/RH sensor temperature (resistance ratio)(temp_trh_right_rr)
• Left relative humidity (mV)(rh_left_mv)
• Left air temperature(temp_air_left)
• Right relative humidity (mV)(rh_right_mv)
• Left T/RH sensor temperature (resistance ratio)(temp_trh_left_rr)
• Right air temperature(temp_air_right)