SGP/EBBR/E7 - 3-month Check

During EBBR 3 month checks the Automatic Exchange Mechanism is disabled
(reflected by home signals near zero) so that the two aspirator units can be
placed at the same height.  The measurements during this period, at least,
do not produce correct outputs of bowen ratio (bowen), sensible heat flux (h),
or latent heat flux (e), nor do the air temperature and relative humidity
measurements indicate gradients.  Checks performed before or after the AEM
is disabled also lead to some incorrect data.

• Top vapor pressure(vapor_pressure_top)
• Bottom air temperature(temp_air_bottom)
• Top T/RH sensor temperature(temp_trh_top)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Top air temperature(temp_air_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top relative humidity (fractional)(rh_top_fraction)

• Left relative humidity (mV)(rh_left_mv)
• Right relative humidity (mV)(rh_right_mv)
• Right T/RH sensor temperature (resistance ratio)(temp_trh_right_rr)
• Left air temperature(temp_air_left)
• Left T/RH sensor temperature (resistance ratio)(temp_trh_left_rr)
• Right air temperature(temp_air_right)

• Top vapor pressure(vapor_pressure_top)
• Top T/RH sensor temperature(temp_trh_top)
• Bottom air temperature(temp_air_bottom)
• Bowen ratio(bowen_ratio)
• Top air temperature(temp_air_top)
• Bottom vapor pressure(vapor_pressure_bottom)
• Bottom T/RH sensor temperature(temp_trh_bottom)
• Surface sensible heat flux(sensible_heat_flux)
• Surface latent heat flux(latent_heat_flux)
• Bottom relative humidity (fractional)(rh_bottom_fraction)
• Top relative humidity (fractional)(rh_top_fraction)