TWP/VCEIL/C2 - Power outage in I-Van resulted in Missing Data

I forgot to put in the daily report that we took the I van down yesterday to replace the 
fans in the Clary UPS. This was from 2300z on 24May03 to 0010z on 25May03. Instruments 
affected :

MPL
Ceilometer
MWR
WSI
TSI

Rex

lost data

• Altitude of highest signal(alt_highest_signal)
• Lowest cloud base height detected(first_cbh)
• Distance to the center of the corresponding range bin(range)
• North Latitude(lat)
• Sum of detected and normalized backscatter(sum_backscatter)
• Percentage of nominal factory setting (0 to 999%)(laser_pulse_energy)
• Degrees from vertical (-15 to +90)(tilt_angle)
• lon(lon)
• Percentage of nominal factory setting (0 to 999%)(receiver_sensitivity)
• Flag indicating aeri retrieval status(status_flag)
• Vertical visibility(vertical_visibility)
• Window contamination(window_contamination)
• Warning, alarm, and internal status information(status_string)
• Second lowest cloud base height(second_cbh)
• 6 character string describing instrument measurement parameters(measurement_parameters)
• Detection status.(detection_status)
• Millivolts at internal ADC input (0 to 2500)(background_light)
• base time in epoch(base_time)
• Time offset from base_time(time_offset)
• Laser temperature(laser_temperature)
• -180.0 - +180.0(alt)
• Third cloud base height(third_cbh)
• Raw data filename(filename)
• Aerosol volume backscattering coefficient at 355 nm(backscatter)

• -180.0 - +180.0(alt)
• Millivolts at internal ADC input (0 to 2500)(background_light)
• Distance to the center of the corresponding range bin(range)
• Raw data filename(filename)
• Percentage of nominal factory setting (0 to 999%)(laser_pulse_energy)
• Third cloud base height(third_cbh)
• Flag indicating aeri retrieval status(status_flag)
• base time in epoch(base_time)
• Altitude of highest signal(alt_highest_signal)
• Aerosol volume backscattering coefficient at 355 nm(backscatter)
• lon(lon)
• Second lowest cloud base height(second_cbh)
• Percentage of nominal factory setting (0 to 999%)(receiver_sensitivity)
• Warning, alarm, and internal status information(status_string)
• North Latitude(lat)
• Lowest cloud base height detected(first_cbh)
• Laser temperature(laser_temperature)
• Detection status.(detection_status)
• 6 character string describing instrument measurement parameters(measurement_parameters)

• (Raw data stream - documentation not supported)