TWP/SMET/C3 - Data reported at 15sec rather than 60s intervals

Data in these data streams should be reported at 60sec intervals, but
the logger program running during this time had the interval set to
15s.  Users will have to average the 15sec data to get 60sec data.

Be aware that data are reported at 15s rather than 60s

• time_in_seconds_since_volume_start(time)
• Precipitation mean(precip_mean)
• Time offset from base_time(time_offset)
• Relative humidity mean(relh_mean)
• Lower sensor, wind speed arithmetic average(lo_spd_arith_avg)
• Precipitation standard deviation(precip_sd)
• Upper sensor, wind direction vector average(up_dir_vec_avg)
• Vapor pressure standard deviation(vappress_sd)
• Temperature mean(temp_mean)
• Tipping bucket raingauge total(tbrg_total)
• Upper sensor, wind speed arithmetic average(up_spd_arith_avg)
• Lower sensor, wind direction standard deviation(lo_dir_sd)
• Lower sensor, wind speed standard deviation(lo_spd_sd)
• Data Logger Temperature(logger_temp)
• Lower sensor, wind speed vector average(lo_spd_vec_avg)
• Atmospheric pressure(atmos_pressure)
• Tipping bucket raingauge count total(tbrg_count_total)
• Std Dev of Air Temperature(temp_sd)
• Upper sensor, wind direction standard deviation(up_dir_sd)
• Lower sensor, wind speed maximum(lo_spd_max)
• Upper sensor, wind speed vector average(up_spd_vec_avg)
• Lower sensor, wind direction vector average(lo_dir_vec_avg)
• Vapor pressure mean(vappress_mean)
• Upper sensor, wind speed maximum(up_spd_max)
• Lower sensor, wind speed minimum(lo_spd_min)
• precipitation minimum(precip_min)
• Upper sensor, wind speed standard deviation(up_spd_sd)
• Precipitation maximum(precip_max)
• Internal voltage(internal_voltage)
• Upper sensor, wind speed minimum(up_spd_min)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)

• Wind #2 direction vector average(wind2_dir_vec_avg)
• Wind #1 direction vector average(wind1_dir_vec_avg)
• Wind #1 speed arithmetic average(wind1_spd_arith_avg)
• External voltage(external_voltage)
• Temperature maximum(temp_max)
• Relative humidity maximum(relh_max)
• Wind #1 speed vector average(wind1_spd_vec_avg)
• Wind #1 speed minimum(wind1_spd_min)
• Wind #2 speed vector average(wind2_spd_vec_avg)
• Relative humidity minimum(relh_min)
• Precipitation standard deviation(precip_sd)
• Wind #1 speed maximum gust(wind1_spd_max_gust)
• Wind #2 speed arithmetic average(wind2_spd_arith_avg)
• Temperature mean(temp_mean)
• Wind #2 direction standard deviation(wind2_dir_sd)
• Data Logger Temperature(logger_temp)
• Wind #2 speed maximum(wind2_spd_max)
• Wind #2 speed standard deviation(wind2_spd_sd)
• Wind #2 speed minimum(wind2_spd_min)
• Internal voltage(internal_voltage)
• Bit data. See details.(bit_data)
• Atmospheric pressure(atmos_pressure)
• Std Dev of Relative Humidity or Hardware Error Code(relh_sd)
• Wind #2 speed maximum gust(wind2_spd_max_gust)
• Precipitation mean(precip_mean)
• Vapor pressure standard deviation(vappress_sd)
• mifkbum temp between outputs(temp_min)
• Wind #1 speed maximum(wind1_spd_max)
• Vapor pressure mean(vappress_mean)
• Wind #1 speed standard deviation(wind1_spd_sd)
• Wind #1 direction standard deviation(wind1_dir_sd)
• precipitation minimum(precip_min)
• Std Dev of Air Temperature(temp_sd)
• Time offset from base_time(time_offset)
• Relative humidity mean(relh_mean)
• Precipitation maximum(precip_max)