Subject: | SGP/EBBR/E19 - AEM Stuck In One Position, Surface Fluxes Incorrect |
DataStreams: | sgp15ebbrE19.b1, sgp30ebbrE19.b1, sgp5ebbrE19.b1
|
Description: | The AEM home 15 and 30 outputs were both 40 mv
because the AEM was not exchanging.
Sensible and Latent Heat Fluxes are therefore
incorrect. |
Suggestions: | There is no workaround for this problem. |
Measurements: | sgp30ebbrE19.b1: - Top vapor pressure(vapor_pressure_top)
- Bottom vapor pressure(vapor_pressure_bottom)
- Bottom T/RH sensor temperature(temp_trh_bottom)
- Top relative humidity (fractional)(rh_top_fraction)
- Bottom relative humidity (fractional)(rh_bottom_fraction)
- Top air temperature(temp_air_top)
- Bowen ratio(bowen_ratio)
- Top T/RH sensor temperature(temp_trh_top)
- Bottom air temperature(temp_air_bottom)
- Surface sensible heat flux(sensible_heat_flux)
- Surface latent heat flux(latent_heat_flux)
more
sgp15ebbrE19.b1: - Left air temperature(temp_air_left)
- Right air temperature(temp_air_right)
- Right T/RH sensor temperature (resistance ratio)(temp_trh_right_rr)
- Left T/RH sensor temperature (resistance ratio)(temp_trh_left_rr)
more
sgp5ebbrE19.b1: - Bottom vapor pressure(vapor_pressure_bottom)
- Top T/RH sensor temperature(temp_trh_top)
- Bottom relative humidity (fractional)(rh_bottom_fraction)
- Bottom air temperature(temp_air_bottom)
- Top air temperature(temp_air_top)
- Top relative humidity (fractional)(rh_top_fraction)
- Top vapor pressure(vapor_pressure_top)
- Bottom T/RH sensor temperature(temp_trh_bottom)
more
|