SGP/AERI/C1 - AERI-01 laser and cooler failure

On January 8, 2005 the laser failed on the AERI-01. After it was repaired and during 
calibration, the cryogenic cooler and its spare also failed. The instrument has been off-line 
since the failure.

Use co-located SGP.C1 AERI data while the SGP.C1 AERI-01 is down

• Ambient air temperature near blackbodies(airNearBBsTemp)
• time_in_seconds_since_volume_start(time)
• Time at center of AERI sky observation period(timeHHMMSS)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• Observation longitude(Longitude)
• Observation latitude(Latitude)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• -180.0 - +180.0(alt)
• Electronics rack ambient temperature(rackAmbientTemp)
• Time offset from base_time(time_offset)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1Temp)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
• North Latitude(lat)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• base time in epoch(base_time)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• lon(lon)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2Temp)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Observation altitude(Altitude)
• wavenumbers for mean radiance spectra(wnum)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
• Wave number in reciprocal centimeters(wnum2)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Difference between the sky view\'s radiance variance and the hot black body
  view\'s variance(standard_dev_mean_rad)
• Mean of radiance spectra ensemble(mean_rad)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Ambient blackbody temperature(ABBbottomTemp)
• Signal conditioning electronics inside air temperature(SCETemp)
• Stirling cycle cooler current(coolerCurrent)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• Hot blackbody temperature - apex(HBBapexTemp)
• AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Ingest computer temperature(computerTemp)
• Detector Temperature(detectorTemp)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Spare temperature sensor (location TBD)(spareTemp)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Julian Day including day and fraction of day(JulianDay)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• Time at center of AERI sky observation period(Time)
• Scene mirror position encoder value(sceneMirPosEncoder)

• AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
• HBB view radiance standard deviation (700_705 cm^-1)(HBBviewStdDevRadiance700_705)
• AERI LW scene NESR spectral averages (ch1)(SkyNENCh1)
• Electronics rack ambient temperature(rackAmbientTemp)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBviewStdDevRadiance985_990)
• Radiance standard deviation during hot blackbody view averaged over (700_705
  cm-1)(HBBViewStdDevRadiance700_705)
• Radiance standard deviation during ambient blackbody view averaged over (700_705
  cm-1)(ABBViewStdDevRadiance700_705)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBViewStdDevRadiance985_990)
• Radiance standard deviation during ambient blackbody view averaged over
  (2510_2515 cm-1)(ABBViewStdDevRadiance2510_2515)
• Time at center of AERI sky observation period(Time)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Ambient blackbody temperature(ABBbottomTemp)
• Two minute noise estimate factor(twoMinuteNoiseEstimateFactor)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Stirling cycle cooler current(coolerCurrent)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• ABB view radiance standard deviation (700_705 cm^-1)(ABBviewStdDevRadiance700_705)
• Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
• Time offset from base_time(time_offset)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyVariabilityAveragesCh1)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• AERI SW scene brightness temp spectral averages (ch2)(SkyBrightnessTempSpectralAveragesCh2)
• AERI LW scene brightness temp spectral averages (ch1)(SkyBrightnessTempSpectralAveragesCh1)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyVariabilityAveragesCh2)
• Averaged Wave number in inverse centimeters(wnumsum13)
• Averaged wave number for SW scene brightness temp spectral averages (ch2)(wnumsum14)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Averaged wave number for SW HBB 2min NESR estimate number 2 (ch2)(wnumsum10)
• Wave number in reciprocal centimeters(wnumsum11)
• Averaged wave number for SW scene radiance spectral averages (ch2)(wnumsum12)
• Time at center of AERI sky observation period(timeHHMMSS)
• Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
• AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectraAveragesCh2)
• Hot blackbody temperature - apex(HBBapexTemp)
• AERI LW Responsivity Spectral Averages (Ch1)(ResponsivitySpectraAveragesCh1)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Scene mirror position encoder value(sceneMirPosEncoder)
• ABB View Radiance Std Deviation (675_680 cm^-1)(ABBviewStdDevRadiance675_680)
• AERI LW HBB 2min NESR estimate #2 derived from sequential HBB views (ch1)(HBB2minNENEstimateNo2Ch1)
• AERI SW HBB 2min NESR Estimate #2 derived from sequential HBB views (Ch2)(HBB2minNENEstimateNo2Ch2)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Radiance standard deviation during hot blackbody view averaged over (2510_2515
  cm-1)(HBBViewStdDevRadiance2510_2515)
• Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false)(LWskyNENAcceptable)
• HBB view radiance standard deviation (2510_2515 cm^-1)(HBBviewStdDevRadiance2510_2515)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Ambient blackbody temperature - apex(ABBapexTemp)
• ABB view radiance standard deviation (2510_2515 cm^-1)(ABBviewStdDevRadiance2510_2515)
• ABB View Radiance Std Deviation (2282_2287 cm^-1)(ABBviewStdDevRadiance2282_2287)
• Radiance standard deviation during ambient blackbody view averaged over
  (2282_2287 cm-1)(ABBViewStdDevRadiance2282_2287)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1Temp)
• North Latitude(lat)
• Julian Day including day and fraction of day(JulianDay)
• -180.0 - +180.0(alt)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
• Detector Temperature(detectorTemp)
• Averaged wave number for LW responsivity spectral averages(wnumsum1)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Radiance standard deviation during ambient blackbody view averaged over
  (2295_2300 cm-1)(ABBViewStdDevRadiance2295_2300)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Signal conditioning electronics inside air temperature(SCETemp)
• Averaged wave number for LW HBB 2min NESR estimate number 1 (ch1)(wnumsum7)
• Averaged wave number for SW scene NESR spectral averages (ch2)(wnumsum6)
• Averaged Wave number in inverse centimeters(wnumsum9)
• Averaged Wave number in inverse centimeters(wnumsum8)
• Averaged Wave number in inverse centimeters(wnumsum3)
• Averaged wave number for SW responsivity spectral averages(wnumsum2)
• Wave number in reciprocal centimeters(wnumsum5)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false)(SWskyNENAcceptable)
• Averaged Wave number in inverse centimeters(wnumsum4)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Signal conditioning electronics inside air temperature(SCEtemp)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
• AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENEstimateNo1Ch2)
• base time in epoch(base_time)
• AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENEstimateNo1Ch1)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
• Observation longitude(Longitude)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm^-1(SWskyNEN)
• Radiance standard deviation during ambient blackbody view averaged over (675_680
  cm-1)(ABBViewStdDevRadiance675_680)
• Longwave radiance average (700_705 cm^-1) elevated air(elevatedLayerRadiance700_705)
• Ambient air temperature near blackbodies(airNearBBsTemp)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false)(HBBStable)
• HBB view radiance standard deviation (675_680 cm^-1)(HBBviewStdDevRadiance675_680)
• Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
• Observation latitude(Latitude)
• Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Radiance standard deviation during hot blackbody view averaged over (2282_2287
  cm-1)(HBBViewStdDevRadiance2282_2287)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2Temp)
• HBB view radiance standard deviation (2282_2287 cm^-1)(HBBviewStdDevRadiance2282_2287)
• lon(lon)
• time_in_seconds_since_volume_start(time)
• AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
• Radiance standard deviation during hot blackbody view averaged over (675_680
  cm-1)(HBBViewStdDevRadiance675_680)
• Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
• Observation altitude(Altitude)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Radiance standard deviation during hot blackbody view averaged over (2295_2300
  cm-1)(HBBViewStdDevRadiance2295_2300)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Ingest computer temperature(computerTemp)
• Radiance standard deviation during hot blackbody view averaged over (985_990
  cm-1)(HBBViewStdDevRadiance985_990)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Shortwave radiance average (2282_2287 cm^-1) elevated air(elevatedLayerRadiance2282_2287)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• HBB view radiance standard deviation (985_990 cm^-1)(HBBviewStdDevRadiance985_990)
• AERI LW Scene radiance spectral averages (ch1)(SkyRadianceSpectraAveragesCh1)
• AERI SW scene radiance spectral averages (ch2)(SkyRadianceSpectraAveragesCh2)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the scene view(HBBtempDrift)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
• ABB View Radiance Std Deviation (2295_2300 cm^-1)(ABBviewStdDevRadiance2295_2300)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
• HBB View Radiance Std Deviation (2295_2300 cm^-1)(HBBviewStdDevRadiance2295_2300)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)

• Time at end of interferometer data collection(rawTimeHHMMSS)
• Hot blackbody temperature - apex(HBBapexTemp)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Ambient air temperature at hatch opening(outsideAirTemp)
• base time in epoch(base_time)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Julian Day including day and fraction of day(JulianDay)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Blackbody controller Unit 2 power supply temperature(BBcontroller2Temp)
• lon(lon)
• Observation longitude(Longitude)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
• Stirling cycle cooler current(coolerCurrent)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• time_in_seconds_since_volume_start(time)
• Detector Temperature(detectorTemp)
• Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Difference between the sky view\'s radiance variance and the hot black body
  view\'s variance(standard_dev_mean_rad)
• Time at center of AERI sky observation period(Time)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Observation latitude(Latitude)
• Wave number in reciprocal centimeters(wnum2)
• North Latitude(lat)
• Ingest computer temperature(computerTemp)
• Time offset from base_time(time_offset)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• -180.0 - +180.0(alt)
• Observation altitude(Altitude)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Time at center of AERI sky observation period(timeHHMMSS)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Signal conditioning electronics inside air temperature(SCETemp)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• Scene mirror position encoder value(sceneMirPosEncoder)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Spare temperature sensor (location TBD)(spareTemp)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Mean of radiance spectra ensemble(mean_rad)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• wavenumbers for mean radiance spectra(wnum)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• AERI instrument hatch indicator (open, closed, neither)(hatchIndicator)
• Ambient blackbody temperature(ABBbottomTemp)
• Blackbody controller Unit 1 power supply temperature(BBcontroller1Temp)
• Electronics rack ambient temperature(rackAmbientTemp)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Ambient air temperature near blackbodies(airNearBBsTemp)

• Barometric pressure at site(rawAtmosphericPressure)
• Engineering channel 0 raw counts(engineeringChannel0Counts)
• Engineering channel 2 raw counts(engineeringChannel2counts)
• Engineering channel 1 data(engineeringChannel1data)
• Standard deviation of AERI pressure in counts(countsStdDevPressure)
• Standard deviation of AERI relative humidity in counts(countsStdDevRelativeHumidity)
• Observation altitude(Altitude)
• Reflected Temperature(thermistor2)
• Thermistor input channel number 3 (counting from 0) equivalent temperature(thermistor3)
• Ambient Air near BBs(thermistor0)
• Thermistor input channel number 1 (counting from 0) equivalent temperature(thermistor1)
• Engineering channel 1 data(engineeringChannel1Data)
• Time offset from base_time(time_offset)
• Thermistor input channel number 6 (counting from 0) equivalent temperature(thermistor6)
• Thermistor input channel number 7 (counting from 0) equivalent temperature(thermistor7)
• Thermistor input channel number 4 (counting from 0) equivalent temperature(thermistor4)
• ABB #1(thermistor5)
• Engineering channel 1 raw counts(engineeringChannel1Counts)
• Electronics Air(thermistor8)
• Thermistor input channel number 9 (counting from 0) equivalent temperature(thermistor9)
• time_in_seconds_since_volume_start(time)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• lon(lon)
• Engineering channel 0 data(engineeringChannel0data)
• Engineering channel 0 raw counts(engineeringChannel0counts)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Temperature standard deviation for thermistor channel 0(tempStdDevThermistor0)
• Temperature standard deviation for thermistor channel 1(tempStdDevThermistor1)
• Temperature standard deviation for thermistor channel 8(tempStdDevThermistor8)
• -180.0 - +180.0(alt)
• Temperature standard deviation for thermistor channel 9(tempStdDevThermistor9)
• Temperature standard deviation for thermistor channel 6(tempStdDevThermistor6)
• Temperature standard deviation for thermistor channel 7(tempStdDevThermistor7)
• Temperature standard deviation for thermistor channel 4(tempStdDevThermistor4)
• Temperature standard deviation for thermistor channel 5(tempStdDevThermistor5)
• Temperature standard deviation for thermistor channel 2(tempStdDevThermistor2)
• Temperature standard deviation for thermistor channel 3(tempStdDevThermistor3)
• North Latitude(lat)
• Time at end of interferometer data collection(rawTimeHHMMSS)
• Engineering channel 0 data(engineeringChannel0Data)
• Time at center of AERI sky observation period(Time)
• Temperature standard deviation for thermistor channel 21(tempStdDevThermistor21)
• Temperature standard deviation for thermistor channel 20(tempStdDevThermistor20)
• Temperature standard deviation for thermistor channel 23(tempStdDevThermistor23)
• Spare temperature sensor (location TBD)(spareTemp)
• Temperature standard deviation for thermistor channel 22(tempStdDevThermistor22)
• Mirror position encoder value(rawMirrorPositionEncoder)
• Temperature standard deviation for thermistor channel 18(tempStdDevThermistor18)
• Temperature standard deviation for thermistor channel 17(tempStdDevThermistor17)
• Engineering channel 1 raw counts(engineeringChannel1counts)
• Temperature standard deviation for thermistor channel 19(tempStdDevThermistor19)
• Observation longitude(Longitude)
• Temperature standard deviation for thermistor channel 14(tempStdDevThermistor14)
• Temperature standard deviation for thermistor channel 13(tempStdDevThermistor13)
• Temperature standard deviation for thermistor channel 16(tempStdDevThermistor16)
• Temperature standard deviation for thermistor channel 15(tempStdDevThermistor15)
• Temperature standard deviation for thermistor channel 10(tempStdDevThermistor10)
• Temperature standard deviation for thermistor channel 12(tempStdDevThermistor12)
• Temperature standard deviation for thermistor channel 11(tempStdDevThermistor11)
• Thermistor input channel number 20 (counting from 0) equivalent temperature(thermistor20)
• Thermistor input channel number 21 (counting from 0) equivalent temperature(thermistor21)
• Thermistor input channel number 22 (counting from 0) equivalent temperature(thermistor22)
• Thermistor input channel number 23 (counting from 0) equivalent temperature(thermistor23)
• Observation latitude(Latitude)
• base time in epoch(base_time)
• Thermistor input channel number 15 (counting from 0) equivalent temperature(thermistor15)
• Thermistor input channel number 16 (counting from 0) equivalent temperature(thermistor16)
• Thermistor input channel number 17 (counting from 0) equivalent temperature(thermistor17)
• Thermistor input channel number 18 (counting from 0) equivalent temperature(thermistor18)
• Thermistor input channel number 19 (counting from 0) equivalent temperature(thermistor19)
• Hatch Closed Indicator(thermistor10)
• Thermistor input channel number 11 (counting from 0) equivalent temperature(thermistor11)
• Thermistor input channel number 12 (counting from 0) equivalent temperature(thermistor12)
• Spare #2(thermistor13)
• Thermistor input channel number 14 (counting from 0) equivalent temperature(thermistor14)
• Engineering channel 2 raw counts(engineeringChannel2Counts)
• Engineering channel 2 data(engineeringChannel2data)
• Julian Day including day and fraction of day(JulianDay)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• Relative humidity at site(rawAtmosphericRelativeHumidity)
• Time at center of AERI sky observation period(timeHHMMSS)
• Engineering channel 2 data(engineeringChannel2Data)

• (Raw data stream - documentation not supported)