TWP/MPL/C3 - Missing data due to instrument removal

The instrument was removed from this site to replace a failed instrument at TWP-C2 Nauru.

• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• base time in epoch(base_time)
• Subtract from range_bins to yield range(range_offset)
• Filter Temperature(filter_temp)
• Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
• Time offset from base_time(time_offset)
• Preliminary cloud base height above ground level(preliminary_cbh)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Instrument Temperature(instrument_temp)
• Voltage level which operates the A/D card and the detector(voltage_05)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Laser Temperature(laser_temp)
• Voltage level which operates the thermistor(voltage_10)
• Distance to the center of the corresponding range bin(range)
• Voltage level which operates the energy monitor(voltage_15)
• -180.0 - +180.0(alt)
• time_in_seconds_since_volume_start(time)
• Background signal(background_signal)
• North Latitude(lat)
• Height(height)
• Assumed zero-range bin number(assumed_zero_range_bin)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Number of lidar pulses summed(shots_summed)
• lon(lon)
• Laser output energy per pulse(energy_monitor)
• Attenuated backscatter(detector_counts)
• Detector Temperature(detector_temp)

• (Raw data stream - documentation not supported)