Measurements: | twpmplC2.a1: - Laser output energy per pulse(energy_monitor)
- Number of laser pulses summed during measurement interval(shots_sum)
- Time offset from base_time(time_offset)
- Assumed zero-range bin number(assumed_zero_range_bin)
- Laser Temperature(laser_temp)
- base time in epoch(base_time)
- Angle of inclination with respect to horizontal(transceiver_altitude_angle)
- Sum of raw backscatter counts per bin prior to ANY corrections.(total_counts)
- Amount of time the actual laser pulse lags behind the sync trigger(laser_sync_offset)
- Detector Temperature(detector_temp)
- Distance to the center of the corresponding range bin(range)
- Preliminary cloud base height above ground level(preliminary_cbh)
- Instrument Temperature(instrument_temp)
- Voltage level which operates the thermistor(voltage_10)
- -180.0 - +180.0(alt)
- Amount of time the scalar lags behind the sync trigger(scalar_sync_offset)
- Repetition rate, or Trigger Frequency of the laser(trigger_freq)
- Aerosol volume backscattering coefficient at 355 nm(backscatter)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Voltage level which operates the energy monitor(voltage_15)
- Deadtime correction factor(deadtime_correction)
- Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
- Amount of time laser pulse lags behind the scalar trigger(laser_scalar_sync_offset)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- North Latitude(lat)
- Number of lidar pulses summed(shots_summed)
- Height(height)
- Background signal(background_signal)
- Subtract from range_bins to yield range(range_offset)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- Attenuated backscatter(detector_counts)
- Angle of orientation with respect to true geographic north(transceiver_azimuth_angle)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- value represents earliest applicable date as yyyymmdd(property)
- Filter Temperature(filter_temp)
- lon(lon)
- time_in_seconds_since_volume_start(time)
- Voltage level which operates the A/D card and the detector(voltage_05)
more
twpmplC2.00: - (Raw data stream - documentation not supported)
more
|