NSA/MPL/C1 - Missing data

System was down for detector replacement.

• Polarization control enabled flag(polarization_control)
• Attenuated backscatter(signal_return)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Background signal(background_signal)
• Distance to the center of the corresponding range bin(range)
• Dead time correction flag(dead_time_corrected)
• Laser output energy per pulse(energy_monitor)
• time_in_seconds_since_volume_start(time)
• Laser Temperature(laser_temp)
• lon(lon)
• base time in epoch(base_time)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Telescope temperature(scope_temp)
• Number of laser pulses summed during averaging interval(shots_per_avg)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Polarization control voltage setting(polarization_control_voltage)
• Number of detector channels(num_channels)
• Subtract from range_bins to yield range(range_offset)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• Detector Temperature(detector_temp)
• Number of bins stored in data block(num_bins)
• North Latitude(lat)
• Preliminary cloud base height above ground level(preliminary_cbh)
• Height(height)
• -180.0 - +180.0(alt)
• Time offset from base_time(time_offset)
• Background signal standard deviation(background_signal_std)
• Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)