TWP/MPL/C1 - Laser not transmitting

Laser was not turned on with remainder of system following power failure.

• Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
• time_in_seconds_since_volume_start(time)
• Attenuated backscatter, cross pol(signal_return_cross_pol)
• Telescope temperature(scope_temp)
• Time offset from base_time(time_offset)
• Number of samples used for cross-pol averages(nsamples_cross_pol_average)
• lon(lon)
• Distance to the center of the corresponding range bin(range)
• (aqc_signal_return_cross_pol)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• Height(height)
• (aqc_signal_return_co_pol)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
• Background signal, cross pol data(background_signal_cross_pol)
• North Latitude(lat)
• Number of laser pulses summed during averaging interval(shots_per_sample)
• -180.0 - +180.0(alt)
• Attenuated backscatter, co-pol(signal_return_co_pol)
• base time in epoch(base_time)
• Number of detector channels(num_channels)
• Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
• Subtract from range_bins to yield range(range_offset)
• Background signal, co-pol(background_signal_co_pol)
• Number of bins stored in data block(num_bins)
• Laser output energy per pulse(energy_monitor)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
• Detector Temperature(detector_temp)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Laser Temperature(laser_temp)
• Number of samples used for co-pol averages(nsamples_co_pol_average)
• Dead time correction flag(dead_time_corrected)
• Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
• Background signal standard deviation, copol data(background_signal_std_co_pol)

• Number of detector channels(num_channels)
• Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
• Background signal, cross pol data(background_signal_cross_pol)
• Subtract from range_bins to yield range(range_offset)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• -180.0 - +180.0(alt)
• Detector Temperature(detector_temp)
• North Latitude(lat)
• Number of samples used for cross-pol averages(nsamples_cross_pol_average)
• (aqc_signal_return_co_pol)
• Dead time correction flag(dead_time_corrected)
• lon(lon)
• Attenuated backscatter, co-pol(signal_return_co_pol)
• base time in epoch(base_time)
• time_in_seconds_since_volume_start(time)
• Attenuated backscatter, cross pol(signal_return_cross_pol)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• Number of bins stored in data block(num_bins)
• Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
• (aqc_signal_return_cross_pol)
• Number of samples used for co-pol averages(nsamples_co_pol_average)
• Background signal standard deviation, copol data(background_signal_std_co_pol)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Laser Temperature(laser_temp)
• Background signal, co-pol(background_signal_co_pol)
• Distance to the center of the corresponding range bin(range)
• Laser output energy per pulse(energy_monitor)
• Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
• Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
• Number of laser pulses summed during averaging interval(shots_per_sample)
• Telescope temperature(scope_temp)
• Time offset from base_time(time_offset)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
• Height(height)

• Polarization control voltage setting(polarization_control_voltage)
• Subtract from range_bins to yield range(range_offset)
• Telescope temperature(scope_temp)
• Distance from leading edge of first range bin to the center of each bin .(range_bins)
• Width of range-bins calculated from range_bin_time(range_bin_width)
• Background signal(background_signal)
• Number of detector channels(num_channels)
• Preliminary cloud base height above ground level(preliminary_cbh)
• Dead time correction flag(dead_time_corrected)
• Detector Temperature(detector_temp)
• Height(height)
• Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
• Attenuated backscatter(signal_return)
• Laser output energy per pulse(energy_monitor)
• lon(lon)
• Distance to the center of the corresponding range bin(range)
• base time in epoch(base_time)
• Polarization control enabled flag(polarization_control)
• time_in_seconds_since_volume_start(time)
• Time offset from base_time(time_offset)
• Number of laser pulses summed during averaging interval(shots_per_avg)
• Number of bins stored in data block(num_bins)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
• Maximum altitude retrieved from multichannel scalar card.(max_altitude)
• Background signal standard deviation(background_signal_std)
• Laser Temperature(laser_temp)