DQRID : D081023.1
Start DateStart TimeEnd DateEnd Time
10/23/2008165311/06/20081950
02/10/2009040002/26/20092200
more
Subject:
TWP/MPL/C3 - Missing data
DataStreams:twpmplpolavgC3.s1, twpmplpolC3.b1, twpmplpolavgC3.c1
Description:
Data are missing and unrecoverable.
Suggestions: 
Measurements:twpmplpolavgC3.c1:
  • Background signal, co-pol(background_signal_co_pol)
  • lon(lon)
  • Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
  • base time in epoch(base_time)
  • Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
  • Dead time correction flag(dead_time_corrected)
  • Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
  • Background signal, cross pol data(background_signal_cross_pol)
  • Distance from leading edge of first range bin to the center of each bin .(range_bins)
  • Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
  • Number of samples used for co-pol averages(nsamples_co_pol_average)
  • Maximum altitude retrieved from multichannel scalar card.(max_altitude)
  • Attenuated backscatter, cross pol(signal_return_cross_pol)
  • Detector Temperature(detector_temp)
  • Laser output energy per pulse(energy_monitor)
  • Height(height)
  • time_in_seconds_since_volume_start(time)
  • (aqc_signal_return_cross_pol)
  • Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
  • Distance to the center of the corresponding range bin(range)
  • Background signal standard deviation, copol data(background_signal_std_co_pol)
  • Number of laser pulses summed during averaging interval(shots_per_sample)
  • Laser Temperature(laser_temp)
  • (aqc_signal_return_co_pol)
  • Telescope temperature(scope_temp)
  • Number of samples used for cross-pol averages(nsamples_cross_pol_average)
  • Width of range-bins calculated from range_bin_time(range_bin_width)
  • Number of bins stored in data block(num_bins)
  • Number of detector channels(num_channels)
  • Attenuated backscatter, co-pol(signal_return_co_pol)
  • North Latitude(lat)
  • Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
  • Time offset from base_time(time_offset)
  • -180.0 - +180.0(alt)
  • Subtract from range_bins to yield range(range_offset)
more
twpmplpolavgC3.s1:
  • Number of bins stored in data block(num_bins)
  • Background signal, co-pol(background_signal_co_pol)
  • Number of laser pulses summed during averaging interval(shots_per_sample)
  • North Latitude(lat)
  • Laser output energy per pulse(energy_monitor)
  • Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
  • Background signal standard deviation, copol data(background_signal_std_co_pol)
  • Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
  • -180.0 - +180.0(alt)
  • Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
  • Detector Temperature(detector_temp)
  • Height(height)
  • Laser Temperature(laser_temp)
  • base time in epoch(base_time)
  • Distance to the center of the corresponding range bin(range)
  • (aqc_signal_return_cross_pol)
  • Telescope temperature(scope_temp)
  • Background signal, cross pol data(background_signal_cross_pol)
  • Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
  • Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
  • (aqc_signal_return_co_pol)
  • Distance from leading edge of first range bin to the center of each bin .(range_bins)
  • Number of samples used for co-pol averages(nsamples_co_pol_average)
  • Subtract from range_bins to yield range(range_offset)
  • Maximum altitude retrieved from multichannel scalar card.(max_altitude)
  • Time offset from base_time(time_offset)
  • time_in_seconds_since_volume_start(time)
  • lon(lon)
  • Dead time correction flag(dead_time_corrected)
  • Number of detector channels(num_channels)
  • Attenuated backscatter, co-pol(signal_return_co_pol)
  • Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
  • Number of samples used for cross-pol averages(nsamples_cross_pol_average)
  • Width of range-bins calculated from range_bin_time(range_bin_width)
  • Attenuated backscatter, cross pol(signal_return_cross_pol)
more
twpmplpolC3.b1:
  • Polarization control enabled flag(polarization_control)
  • Time offset from base_time(time_offset)
  • base time in epoch(base_time)
  • time_in_seconds_since_volume_start(time)
  • Distance from leading edge of first range bin to the center of each bin .(range_bins)
  • Preliminary cloud base height above ground level(preliminary_cbh)
  • Number of laser pulses summed during averaging interval(shots_per_avg)
  • Maximum altitude retrieved from multichannel scalar card.(max_altitude)
  • Laser output energy per pulse(energy_monitor)
  • North Latitude(lat)
  • -180.0 - +180.0(alt)
  • Background signal(background_signal)
  • Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
  • Number of bins stored in data block(num_bins)
  • Background signal standard deviation(background_signal_std)
  • lon(lon)
  • Attenuated backscatter(signal_return)
  • Dead time correction flag(dead_time_corrected)
  • Width of range-bins calculated from range_bin_time(range_bin_width)
  • Laser Temperature(laser_temp)
  • Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
  • Distance to the center of the corresponding range bin(range)
  • Polarization control voltage setting(polarization_control_voltage)
  • Number of detector channels(num_channels)
  • Height(height)
  • Telescope temperature(scope_temp)
  • Detector Temperature(detector_temp)
  • Subtract from range_bins to yield range(range_offset)
more

Close this window