Measurements: | sgpmmcrmode6p1200408121clothC1.c1: - MPL Campbell et al. Algorithm Cloud Base Height(CloudBaseMplCamp)
- LASER Cloud Base Height Best Estimate(CloudBaseBestEstimate)
- MPL Clothiaux et al. Algorithm Cloud Base Height(CloudBaseMplCloth)
- MMCR Spectral Width(SpectralWidth)
- Microwave Radiometer Wet Window/Optical Rain Gauge Cloud Base Height(CloudBasePrecipitation)
- BLC/VCEIL Clothiaux et al. Algorithm Cloud Base Height(CloudBaseCeilometerCloth)
- MMCR Signal-to-Noise Ratio(SignaltoNoiseRatio)
- Time offset from base_time(time_offset)
- Range Heights (center of radar sample volume)(Heights)
- MMCR Mean Doppler Velocity(MeanDopplerVelocity)
- Reflectivity(Reflectivity)
- base time in epoch(base_time)
- MPL Scott Algorithm Cloud Base Height(CloudBaseMplScott)
- BLC/VCEIL Standard Algorithm Cloud Base Height(CloudBaseCeilometerStd)
more
sgpmplpolC1.b1: - Number of laser pulses summed during averaging interval(shots_per_avg)
- Time offset from base_time(time_offset)
- Laser Temperature(laser_temp)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- base time in epoch(base_time)
- Background signal(background_signal)
- Telescope temperature(scope_temp)
- Dead time correction flag(dead_time_corrected)
- Detector Temperature(detector_temp)
- North Latitude(lat)
- Number of bins stored in data block(num_bins)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- -180.0 - +180.0(alt)
- Height(height)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- time_in_seconds_since_volume_start(time)
- Polarization control enabled flag(polarization_control)
- Distance to the center of the corresponding range bin(range)
- lon(lon)
- Time in nanoseconds for each range bin of multichannel scalar card.(range_bin_time)
- Background signal standard deviation(background_signal_std)
- Preliminary cloud base height above ground level(preliminary_cbh)
- Number of detector channels(num_channels)
- Subtract from range_bins to yield range(range_offset)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- Polarization control voltage setting(polarization_control_voltage)
- Attenuated backscatter(signal_return)
- Laser output energy per pulse(energy_monitor)
more
sgpmplnor1campC1.c1: - Number of lidar pulses summed(shots_summed)
- Laser output energy per pulse(energy_monitor)
- -180.0 - +180.0(alt)
- Altitude of cloud top used in retrieval(cloud_top_height)
- North Latitude(lat)
- base time in epoch(base_time)
- The update time of the historical baseline used for the cloud boundary
determination of this sample(baseline_update_time) - Instrument Temperature(instrument_temp)
- Cloud base height (for first cloud above height threshold)(cloud_base_height)
- Flag indicating whether the beam was extinguished at indicated cloud top(cloud_top_attenuation_flag)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Detector Temperature(detector_temp)
- Laser Temperature(laser_temp)
- Aerosol volume backscattering coefficient at 355 nm(backscatter)
- lon(lon)
- Time offset from base_time(time_offset)
- Background signal(background_signal)
- Relative random error in backscatter profiles(random_error)
- Cloud mask(cloud_mask_2)
- Cloud mask(cloud_mask_1)
- Height(height)
more
sgpmplpolavgC1.s1: - Background signal, cross pol data(background_signal_cross_pol)
- lon(lon)
- Distance to the center of the corresponding range bin(range)
- Subtract from range_bins to yield range(range_offset)
- Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
- time_in_seconds_since_volume_start(time)
- Background signal, co-pol(background_signal_co_pol)
- Attenuated backscatter, cross pol(signal_return_cross_pol)
- Dead time correction flag(dead_time_corrected)
- Number of detector channels(num_channels)
- Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
- Number of bins stored in data block(num_bins)
- (aqc_signal_return_cross_pol)
- Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
- Number of laser pulses summed during averaging interval(shots_per_sample)
- Background signal standard deviation, copol data(background_signal_std_co_pol)
- -180.0 - +180.0(alt)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- North Latitude(lat)
- base time in epoch(base_time)
- Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
- Laser output energy per pulse(energy_monitor)
- Detector Temperature(detector_temp)
- Attenuated backscatter, co-pol(signal_return_co_pol)
- (aqc_signal_return_co_pol)
- Number of samples used for cross-pol averages(nsamples_cross_pol_average)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Telescope temperature(scope_temp)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- Height(height)
- Time offset from base_time(time_offset)
- Number of samples used for co-pol averages(nsamples_co_pol_average)
- Laser Temperature(laser_temp)
more
sgpmplpolavgC1.c1: - Height(height)
- Number of bins stored in data block(num_bins)
- Background signal standard deviation, copol data(background_signal_std_co_pol)
- Background signal, cross pol data(background_signal_cross_pol)
- Background signal, co-pol(background_signal_co_pol)
- Laser Temperature(laser_temp)
- Time offset from base_time(time_offset)
- Repetition Rate, or Trigger Frequency of the laser(pulse_rep)
- Detector Temperature(detector_temp)
- -180.0 - +180.0(alt)
- Preliminary cloud base height above ground level, co-pol(preliminary_cbh_co_pol)
- Number of laser pulses summed during averaging interval(shots_per_sample)
- Number of detector channels(num_channels)
- Polarization control voltage, cross-pol(polarization_control_voltage_cross_pol)
- Telescope temperature(scope_temp)
- Laser output energy per pulse(energy_monitor)
- Number of samples used for co-pol averages(nsamples_co_pol_average)
- Attenuated backscatter, cross pol(signal_return_cross_pol)
- Dead time correction flag(dead_time_corrected)
- time_in_seconds_since_volume_start(time)
- Number of samples used for cross-pol averages(nsamples_cross_pol_average)
- Subtract from range_bins to yield range(range_offset)
- North Latitude(lat)
- Background signal standard deviation, cross-pol(background_signal_std_cross_pol)
- Maximum altitude retrieved from multichannel scalar card.(max_altitude)
- Polarization control voltage, co-pol(polarization_control_voltage_co_pol)
- Preliminary cloud base height above ground level, cross-pol(preliminary_cbh_cross_pol)
- Width of range-bins calculated from range_bin_time(range_bin_width)
- lon(lon)
- base time in epoch(base_time)
- (aqc_signal_return_cross_pol)
- Distance from leading edge of first range bin to the center of each bin .(range_bins)
- Distance to the center of the corresponding range bin(range)
- (aqc_signal_return_co_pol)
- Attenuated backscatter, co-pol(signal_return_co_pol)
more
sgpmplcmask1clothC1.c1: - Time offset from base_time(time_offset)
- MPL Cloth et al. Algorithm Cloud Mask(CloudMaskMplCloth)
- Range Heights (center of radar sample volume)(Heights)
- base time in epoch(base_time)
more
sgpmplsmask1clothC1.c1: - Time offset from base_time(time_offset)
- base time in epoch(base_time)
- Range Heights (center of radar sample volume)(Heights)
- MPL Cloth et al. Algorithm Significance Mask(SigniMaskMplCloth)
more
|