SGP/SWS/C1 - Missing data

Due to an apparently corrupt Compact Flash drive, the instrument appeared to be collecting 
data but the SDS could not retrieve the data files.  The Compact Flash drive was 
replaced with a new one and the SWS is now collecting data properly.  No files were recoverable 
from the corrupt drive.

Use SAS-Ze as alternate data source

• Time offset from base_time(time_offset)
• -180.0 - +180.0(alt)
• Shutter state (1:closed, 0:open)(shutter_closed)
• lon(lon)
• Calibrated spectrum(zen_spec_calib)
• Top of atmosphere spectrum wavelengths(wavelength)
• time_in_seconds_since_volume_start(time)
• North Latitude(lat)
• base time in epoch(base_time)

• lon(lon)
• +5 Voltage(volts_5)
• base time in epoch(base_time)
• Time offset from base_time(time_offset)
• Board stack temperature(stack_temp)
• -180.0 - +180.0(alt)
• Time of last dark current measurment(dc_time)
• North Latitude(lat)
• Top of atmosphere spectrum wavelengths(wavelength)
• +15 Voltage(volts_15)
• Input voltage(input_voltage)
• Spectrum data(spectrum)

• Output of voltage regulator at +12VDC(ps2_12v)
• North Latitude(lat)
• Time offset from base_time(time_offset)
• -180.0 - +180.0(alt)
• Output of voltage regulator at +5VDC(ps2_5v)
• Internal instrument temperature(internal_temp)
• Silicon spectrometer temperature(SI_spect_temp)
• Output of voltage converter to -12VDC(pc104_neg12v)
• time_in_seconds_since_volume_start(time)
• Indium/Gallium/Arsenic spectrometer temperature(InGaAs_spect_temp)
• Output of voltage converter to +12VDC(pc104_pos12v)
• lon(lon)
• base time in epoch(base_time)
• Output of voltage converter to +5VDC(pc104_5v)