NSA/AERI/C1 - Partial data collection

A corrupt file was found to be crashing the AERI software after approximately 30 minutes 
of data were collected each day during this time period.

With the minimal data collected each day it is advised that data users choose dates 
outside of this time range for research requiring AERI data.

• time_in_seconds_since_volume_start(time)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Duration of scene view(sceneViewDuration)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Observation altitude(Altitude)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Time offset from base_time(time_offset)
• Observation longitude(Longitude)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• -180.0 - +180.0(alt)
• Ambient air temperature at hatch opening(outsideAirTemp)
• AERI instrument data channel number(channelNumber)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Observation date(dateYYMMDD)
• Observation latitude(Latitude)
• lon(lon)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• wavenumbers for mean radiance spectra(wnum)
• Difference between the sky view\'s radiance variance and the hot black body
  view\'s variance(standard_dev_mean_rad)
• Julian Day including day and fraction of day(JulianDay)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• base time in epoch(base_time)
• Character string containing instrument name(instrumentUnitNumber)
• Wave number in reciprocal centimeters(wnum2)
• Calibrated scene type identification(calibratedSceneID)
• AERI instrument unit serial number(AERIunitNumber)
• North Latitude(lat)
• Version number of Operational Software(systemReleaseNumber)
• Mean of radiance spectra ensemble(mean_rad)
• Time at center of AERI sky observation period(timeHHMMSS)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)

• Electronics rack ambient temperature(rackAmbientTemp)
• Corrective offset for final ambient blackbody average temperature(ABBtempOffset)
• Original Laser Wavenumber(originalLaserWavenumber)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Sun sensor intensity(sunSensorIntensity)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the scene view(HBBtempDrift)
• Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
• Resistive temperature of 2500 ohm fixed resistor - banana plug mounted(fixed2500ohmResistor)
• Observation latitude(Latitude)
• Decimal representation of percentage weighting of ambient blackbody apex
  temperature(ABBapexTempWeight)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Blackbody controller unit 2 power supply temperature(BBcontroller2temp)
• Interferometer Window Temperature(interferometerWindowTemp)
• ABB View Radiance Std Deviation (675_680 cm^-1)(ABBviewStdDevRadiance675_680)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Scene mirror temperature as measured at the center of the back of the mirror(sceneMirrorTemp)
• Ambient blackbody temperature(ABBbottomTemp)
• Weight factor for bottom used in calculating ambient blackbody temperature
  average(ABBbottomTempWeight)
• Optics Compartment Relative Humidity(opticsCompartmentRelativeHumidity)
• HBB view radiance standard deviation (2510_2515 cm^-1)(HBBviewStdDevRadiance2510_2515)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• ABB view radiance standard deviation (700_705 cm^-1)(ABBviewStdDevRadiance700_705)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• ABB view radiance standard deviation (2510_2515 cm^-1)(ABBviewStdDevRadiance2510_2515)
• Imaginary radiance during sky view averaged over (2510_2515 cm-1)(skyViewImaginaryRadiance2510_2515)
• Longwave radiance average (700_705 cm^-1) elevated air(elevatedLayerRadiance700_705)
• Stirling cycle cooler expander temperature(coolerExpanderTemp)
• North Latitude(lat)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Hot blackbody temperature - apex(HBBapexTemp)
• ABB View Radiance Std Deviation (2295_2300 cm^-1)(ABBviewStdDevRadiance2295_2300)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Corrective offset for final hot blackbody average temperature(HBBtempOffset)
• Calibrated scene type identification(calibratedSceneID)
• -180.0 - +180.0(alt)
• Front end fan air temperature difference(frontEndFanAirTempDiff)
• Ingest computer temperature(computerTemp)
• Number of complete (forward+backward) interferogram scans in sample average(coadditionsCount)
• Signal conditioning electronics inside air temperature(SCEtemp)
• Radiance standard deviation during ambient blackbody view averaged over (985_990
  cm-1)(ABBviewStdDevRadiance985_990)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
• Stirling cooler power supply temperature measured at power supply frame(coolerPowerSupplyTemp)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Stirling cycle cooler current(coolerCurrent)
• Maximum temperature difference between HBB thermistors(HBBmaxTempDiff)
• Shortwave scene NEN limit(SWskyNENlimit)
• Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
• Ambient blackbody temperature - rim top(ABBtopTemp)
• Character string containing instrument name(instrumentUnitNumber)
• Resistive temperature of 97 Kohm fixed resistor located in SCE-P4 shell(fixed97KohmResistor)
• Stirling cooler compressor temperature measured at compressor heatsink(coolerCompressorTemp)
• Detector Temperature(detectorTemp)
• base time in epoch(base_time)
• Maximum temperature difference between ABB thermistors(ABBmaxTempDiff)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• Imaginary radiance during sky view averaged over (985_990 cm-1)(skyViewImaginaryRadiance985_990)
• Scene mirror motor driver heat sink temperature(motorDriverTemp)
• Ambient air temperature at hatch opening(outsideAirTemp)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• lon(lon)
• Hot blackbody temperature - rim top(HBBtopTemp)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• HBB view radiance standard deviation (700_705 cm^-1)(HBBviewStdDevRadiance700_705)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Scene mirror position count; number of viewers in a sequence(sceneMirPosCount)
• Sky View Imaginary Radiance (675_680 cm^-1)(skyViewImaginaryRadiance675_680)
• Number of terms in FFOV corrections(numberOfTerms)
• Blackbody cavity geometry factor(BBcavityFactor)
• Instrument scene mirror position identifier(sceneMirrorPosition)
• AERI instrument data channel number(channelNumber)
• Time offset from base_time(time_offset)
• Scene mirror position encoder value(sceneMirPosEncoder)
• Shortwave HBB Noise-equivalent Radiance(SW_HBB_NEN)
• Sky view imaginary radiance (2282_2287 cm^-1)(skyViewImaginaryRadiance2282_2287)
• HBB View Radiance Std Deviation (2295_2300 cm^-1)(HBBviewStdDevRadiance2295_2300)
• Interferometer Enclosure Relative Humidity(interferometerEnclosureRelativeHumidity)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
• Limit in Hot-blackbody Temperature Drift(HBBtempDriftLimit)
• Observation altitude(Altitude)
• Longwave HBB noise-equivalent radiance(LW_HBB_NEN)
• HBB view radiance standard deviation (2282_2287 cm^-1)(HBBviewStdDevRadiance2282_2287)
• BB Support Structure Temperature(BBsupportStructureTemp)
• FFOV half angle(FFOVhalfAngle)
• Laser wavenumber used in definition of output wavenumber scale(outputLaserWavenumber)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• Observation longitude(Longitude)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• AERI instrument unit serial number(AERIunitNumber)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Spare temperature sensor (location TBD)(spareTemp)
• Motor step value given to motor controller to achieve proper mirror positioning(sceneMirrorMotorStep)
• Shortwave radiance average (2282_2287 cm^-1) elevated air(elevatedLayerRadiance2282_2287)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Sky View Imaginary Radiance (2295_2300 cm^-1)(skyViewImaginaryRadiance2295_2300)
• time_in_seconds_since_volume_start(time)
• Scene mirror motor case temperature(mirrorMotorTemp)
• Two minute noise estimate factor(twoMinuteNoiseEstimateFactor)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm^-1(SWskyNEN)
• Version number of Operational Software(systemReleaseNumber)
• Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Decimal representation of percentage weighting of hot blackbody apex temperature(HBBapexTempWeight)
• Time at center of AERI sky observation period(timeHHMMSS)
• Observation date(dateYYMMDD)
• ABB View Radiance Std Deviation (2282_2287 cm^-1)(ABBviewStdDevRadiance2282_2287)
• Weight factor for top used in calculating ambient blackbody temperature average(ABBtopTempWeight)
• Size of buffer holding initial spectrum(originalInterferogramSize)
• Expanded Spectral Buffer Size(expandedInterferogramSize)
• Front End Fan Airflow Unheated Temperature(frontEndFanAirUnheatedTemp)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Longwave scene NEN limit(LWskyNENlimit)
• Weight factor for bottom used in calculating hot blackbody temperature average(HBBbottomTempWeight)
• Logical flag indicating whether any data is available at current time
  (true/false)(dataAvailable)
• Resistive temperature of 12 Kohm fixed resistor located in SCE-P3 shell(fixed12KohmResistor)
• AERI interferometer temperature at second port(interferometerSecondPortTemp)
• Blackbody controller unit 1 power supply temperature(BBcontroller1temp)
• HBB view radiance standard deviation (985_990 cm^-1)(HBBviewStdDevRadiance985_990)
• Duration of scene view(sceneViewDuration)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Rain sensor analog output(rainSensorIntensity)
• Julian Day including day and fraction of day(JulianDay)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Weight factor for top used in calculating hot blackbody temperature average(HBBtopTempWeight)
• Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
• Ambient air temperature near the interferometer(airNearInterferometerTemp)
• Hot blackbody temperature - rim bottom(HBBbottomTemp)
• Ambient blackbody temperature - apex(ABBapexTemp)
• Front End Fan Airflow Heated Temperature(frontEndFanAirHeatedTemp)
• Sky View Imaginary Radiance (700_705 cm^-1)(skyViewImaginaryRadiance700_705)
• HBB view radiance standard deviation (675_680 cm^-1)(HBBviewStdDevRadiance675_680)
• Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
• Ambient air temperature near blackbodies(airNearBBsTemp)

• Longwave elevated air brightness temperature from radiance average (700_705
  cm-1)(elevatedLayerAirTemp700_705)
• Radiance standard deviation during sky view averaged over (2282_2287 cm-1)(skyViewStdDevRadiance2282_2287)
• Characteristic value representing overall longwave channel responsivity(LWresponsivity)
• Julian Day including day and fraction of day(JulianDay)
• Logical flag indicating whether longwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using LWskyNEN and
  LWskyNENlimit.(LWskyNENacceptable)
• AERI SW Responsivity Spectral Averages (Ch2)(ResponsivitySpectralAveragesCh2)
• AERI LW responsivity spectral averages (ch1)(ResponsivitySpectralAveragesCh1)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Characteristic value representing overall shortwave channel responsivity(SWresponsivity)
• Time offset from base_time(time_offset)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Longwave window radiance average (985_990 cm^-1)(longwaveWindowRadiance985_990)
• Shortwave window brightness temperature from radiance average (2510_2515 cm-1)(shortwaveWindowAirTemp2510_2515)
• Observation longitude(Longitude)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• Shortwave elevated air brightness temperature from radiance average (2282_2287
  cm-1)(elevatedLayerAirTemp2282_2287)
• Radiance standard deviation during sky view averaged over (2295_2300 cm^-1)(skyViewStdDevRadiance2295_2300)
• base time in epoch(base_time)
• AERI SW scene radiance spectral averages (ch2)(SkyRadianceSpectralAveragesCh2)
• AERI LW Scene Radiance Spectral Averages (Ch1)(SkyRadianceSpectralAveragesCh1)
• North Latitude(lat)
• Observation date(dateYYMMDD)
• Calibrated scene type identification(calibratedSceneID)
• Maximum Standard Deviation in Thermistor Channels 0..7(maxSampleStdDev)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• -180.0 - +180.0(alt)
• Front end fan air temperature difference(frontEndFanAirTempDiff)
• AERI instrument unit serial number(AERIunitNumber)
• Averaged wave number for SW scene radiance spectral averages (ch2)(wnumsum12)
• Observation altitude(Altitude)
• Wave number in reciprocal centimeters(wnumsum11)
• Shortwave radiance average (2295_2300 cm^-1) Surface Air(surfaceLayerRadiance2295_2300)
• Averaged wave number for SW scene brightness temp spectral averages (ch2)(wnumsum14)
• Averaged Wave number in inverse centimeters(wnumsum13)
• Longwave radiance average (700_705 cm^-1) elevated air(elevatedLayerRadiance700_705)
• The noise equivalent radiance observed in the longwave channel during a sky view
  at 1000 cm-1(LWskyNEN)
• Sun sensor intensity(sunSensorIntensity)
• AERI SW Scene Variability Spectral Averages (Ch2)(SkyUniformityCh2)
• AERI LW Scene Variability Spectral Averages (Ch1)(SkyUniformityCh1)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• Logical flag indicating whether any data is available at current time
  (true/false)(dataAvailable)
• Longwave HBB noise-equivalent radiance(LW_HBB_NEN)
• Radiance standard deviation during sky view averaged over (700_705 cm-1)(skyViewStdDevRadiance700_705)
• lon(lon)
• Shortwave HBB Noise-equivalent Radiance(SW_HBB_NEN)
• Averaged wave number for SW HBB 2min NESR estimate number 2 (ch2)(wnumsum10)
• AERI LW scene brightness temp spectral averages (ch1)(SkyBrightnessTempSpectralAveragesCh1)
• AERI SW scene brightness temp spectral averages (ch2)(SkyBrightnessTempSpectralAveragesCh2)
• Shortwave window radiance average (2510_2515 cm^-1)(shortwaveWindowRadiance2510_2515)
• AERI SW Scene NESR Spectral Averages (Ch2)(SkyNENCh2)
• AERI LW scene NESR spectral averages (ch1)(SkyNENCh1)
• AERI instrument data channel number(channelNumber)
• time_in_seconds_since_volume_start(time)
• Duration of scene view(sceneViewDuration)
• The maximum excursion of hot-blackbody temperature over 5 consecutive scenes,
  centered on the scene view(HBBtempDrift)
• Longwave surface air brightness temperature from radiance average (675_680 cm-1)(surfaceLayerAirTemp675_680)
• Averaged Wave number in inverse centimeters(wnumsum8)
• Averaged Wave number in inverse centimeters(wnumsum9)
• Averaged wave number for SW scene NESR spectral averages (ch2)(wnumsum6)
• Averaged wave number for LW HBB 2min NESR estimate number 1 (ch1)(wnumsum7)
• Averaged Wave number in inverse centimeters(wnumsum4)
• Wave number in reciprocal centimeters(wnumsum5)
• Averaged wave number for SW responsivity spectral averages(wnumsum2)
• Averaged Wave number in inverse centimeters(wnumsum3)
• Averaged wave number for LW responsivity spectral averages(wnumsum1)
• Longwave window brightness temperature from radiance average (985_990 cm^-1)(longwaveWindowAirTemp985_990)
• Logical flag indicating whether shortwave channel noise equivalent radiance is
  acceptable in sky view (true/false). Determined using SWskyNEN and
  SWskyNENlimit.(SWskyNENacceptable)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• Logical flag indicating whether HBB temperature is stable (true) or not stable
  (false). Determined using HBBtempDrift and HBBtempDriftLimit.(HBBstable)
• Maximum temperature difference between HBB thermistors(HBBmaxTempDiff)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• AERI SW HBB 2min NESR estimate #2 derived from sequential HBB views (ch2)(HBB2minNENestimateNo2Ch2)
• AERI LW HBB 2min NESR estimate #2 derived from sequential HBB views (ch1)(HBB2minNENestimateNo2Ch1)
• Radiance standard deviation during sky view averaged over (2510_2515 cm^-1)(skyViewStdDevRadiance2510_2515)
• Character string containing instrument name(instrumentUnitNumber)
• The noise equivalent radiance observed in the shortwave channel during a sky
  view at 2500 cm^-1(SWskyNEN)
• Rain sensor analog output(rainSensorIntensity)
• Longwave radiance average (675-680 cm-1) Surface Air(surfaceLayerRadiance675_680)
• Maximum temperature difference between ABB thermistors(ABBmaxTempDiff)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Shortwave surface air brightness temperature from radiance average (2295_2300
  cm-1)(surfaceLayerAirTemp2295_2300)
• Time at center of AERI sky observation period(timeHHMMSS)
• Observation latitude(Latitude)
• Version number of Operational Software(systemReleaseNumber)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• Radiance standard deviation during sky view averaged over (985_990 cm^-1)(skyViewStdDevRadiance985_990)
• Difference between actual and ideal motor encoder values for current view
  indicative of quality of the mirror positioning.(sceneMirPosEncoderDrift)
• AERI SW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch2)(HBB2minNENestimateNo1Ch2)
• Shortwave radiance average (2282_2287 cm^-1) elevated air(elevatedLayerRadiance2282_2287)
• Radiance standard deviation during sky view averaged over (675_680 cm-1)(skyViewStdDevRadiance675_680)
• Ambient air temperature at hatch opening(outsideAirTemp)
• AERI LW HBB 2min NESR Estimate #1 derived from variance during HBB view (Ch1)(HBB2minNENestimateNo1Ch1)

• Mean of radiance spectra ensemble(mean_rad)
• Time in decimal format at center of AERI sky observation period(Time_UTC_hours)
• lon(lon)
• AERI instrument data channel number(channelNumber)
• AERI instrument unit serial number(AERIunitNumber)
• Calibrated scene type identification(calibratedSceneID)
• Scene mirror view angle in non-negative degrees, measured clockwise from nadir
  looking into interferometer window(sceneMirrorAngle)
• Difference between the sky view\'s radiance variance and the hot black body
  view\'s variance(standard_dev_mean_rad)
• Time offset from base_time(time_offset)
• Character string containing instrument name(instrumentUnitNumber)
• Cold blackbody temperature used in calibration(calibrationCBBtemp)
• Ambient air temperature at hatch opening(outsideAirTemp)
• base time in epoch(base_time)
• Observation longitude(Longitude)
• wavenumbers for mean radiance spectra(wnum)
• Observation latitude(Latitude)
• Time at center of AERI sky observation period(timeHHMMSS)
• Duration of scene view(sceneViewDuration)
• Wave number in reciprocal centimeters(wnum2)
• Logical flag indicating that a data record is missing (true/false)(missingDataFlag)
• Observation date(dateYYMMDD)
• Boolean with negative error conditions: 1:Open 0:Closed -1:Fault -2:Outside
  Valid Range -3:Neither Open Nor Closed(hatchOpen)
• Version number of Operational Software(systemReleaseNumber)
• BB Support Structure Temperature(BBsupportStructureTemp)
• Maximum departure from ideal of the mirror position over the course of all
  contributing views. Typically two hot, two ambient, and one scene view are
  examine(sceneMirPosEncoderMaxDrift)
• Relative humidity measured near Blackbodies. Use with air temperature near BBs
  only.(atmosphericRelativeHumidity)
• Observation altitude(Altitude)
• Julian Day including day and fraction of day(JulianDay)
• Hot blackbody temperature used in calibration(calibrationHBBtemp)
• -180.0 - +180.0(alt)
• Observation atmospheric pressure in AERI electronics(atmosphericPressure)
• North Latitude(lat)
• Ambient temperature used in calibration(calibrationAmbientTemp)
• time_in_seconds_since_volume_start(time)