SBS/RWP/M1 - Horizontal wind field incorrect

When the RWP was returned from Vaisala with the upgraded digital system, a bad control 
module had been installed, that resulted in the phase shifter being unable to shift 
correctly, resulting in incorrect horizontal components of the wind.

Ignore all horizontal wind fields.  Note that the precip mom fields with vertical 
velocities only are correct and usable for radar comparisons.

• Ave snr*10 level, Beam 1(snr1)
• Azimuth of Beam 2(azimuth2)
• Azimuth of Beam 3 for WINDS data(azimuth3)
• Signal to noise ratio, beam 2(snr2)
• Signal to Noise Ratio, Beam 3(snr3)
• Azimuth of beam 4(azimuth4)
• Horizontal wind speed(spd)
• Signal to noise ratio, beam 4(snr4)
• V wind component(v_wind)
• Number of Values Required for Consensus, Beam 1(nrcns1)
• Beam 2 radial wind speed(vel2)
• Beam 1 radial wind speed(vel1)
• Azimuth of Beam 1 for WINDS data(azimuth1)
• Number of values required for consensus, beam 4(nrcns4)
• Number of Values Required for Consensus, Beam 2(nrcns2)
• Number of Values Required for Consensus, Beam 3(nrcns3)
• Number of spectra per averaging interval, beam 1(nrec1)
• Number of spectra/ave int, Beam 3(nrec3)
• Number of spectra/ave int, Beam 2(nrec2)
• Easterly Wind Component(u_wind)
• Beam 4 radial wind speed(vel4)
• Beam 3 radial wind speed(vel3)
• Number of Spectra/ave int, Beam 4(nrec4)
• Number of values that passed consensus, beam 4(ncns4)
• Number of values that passed consensus, beam 2(ncns2)
• Number of values that passed consensus, beam 3(ncns3)
• Number of values that passed consensus, beam 1(ncns1)