SGP/ACSM/C1 - Water in inlet sample line

Data became progressively more noisy causing large spikes in data. These spikes started 
occurring for longer periods of time during the day before the instrument went down 
completely on 7/12.

The afternoon data (usually 15:00-24:00 UTC) was incorrect because of water condensation 
in the inlet line and aerosol collection efficiency change. The organic mass loading is 
around 0 when the condensed water was absorbing all the particles.

Do not use data

• (Raw data stream - documentation not supported)

• Mass concentration of total organics, ambient aerosol in air(total_organics)
• flow rate measured by the mass flow controller(flow_rate)
• Inlet closed(inlet_closed)
• Mass concentration of chloride, ambient aerosol in air.(chloride)
• Inlet open(inlet_open)
• Emission current(emission_current)
• Mass concentration of sulfate, ambient aerosol in air.(sulfate)
• Mass concentration of ammonium, ambient aerosol in air(ammonium)
• Vaporizer(vaporizer)
• Mass concentration of nitrate, ambient aerosol in air(nitrate)

• (Raw data stream - documentation not supported)

• Organic mass spectral matrix(org_mx)
• Mass concentration of ammonium, ambient aerosol in air(ammonium)
• Mass concentration of sulfate, ambient aerosol in air.(sulfate)
• Mass concentration of nitrate, ambient aerosol in air(nitrate)
• Mass concentration of total organics, ambient aerosol in air(total_organics)
• Mass to charge ratios of ion fragments(amus)
• Mass concentration of chloride, ambient aerosol in air.(chloride)
• Organic mass spectral error matrix(org_mx_err)