PVC/CCN/M1 - 10 minute per %ss value

The time interval per %ss step was changed from 5 minutes per step to 10 minutes per step 
to allow more time for the instrument to stabilize between temperature changes for each 
%ss value. Note that the %ss value takes about 4 minutes to stabilize after a 
temperature(%ss) change.

adjust averaging time

• AOS CCN observed temperature at top of column(CCN_t_read_TEC1)
• AOS CCN temperature of the optical particle counter(CCN_T_OPC)
• North Latitude(lat)
• AOS CCN super saturation (calculated)(CCN_super_saturation_calculated)
• time_in_seconds_since_volume_start(time)
• AOS CCN OPC laser current(CCN_laser_current)
• -180.0 - +180.0(alt)
• AOS CCN volumetric flowrate of sheath air(CCN_Q_sheath)
• Cloud condensation nuclei number density(N_CCN)
• AOS CCN number concentration by bin(N_CCN_dN)
• Standard deviation of CCN temperature gradient (CCN_t_read_TEC3 -
  CCN_t_read_TEC1)(CCN_temperature_std)
• Time offset from base_time(time_offset)
• AOS CCN temperature of the nafion humidifier(CCN_T_nafion)
• AOS CCN sample saturation setpoint value reported by instrument(CCN_ss_set)
• CCN Proportional valve voltage(CCN_proportional_valve_voltage)
• AOS CCN logical value, indicating whether the instrument has reached thermal
  gradient stabilization and is within 0.4 degrees C of the set point(CCN_temp_unstable_flag)
• Temperature difference between CCN_t_set_TEC3 and CCN_t_set_TEC1(CCN_temperature_gradient)
• lon(lon)
• AOS CCN temperature of sample air at entrance to instrument(CCN_T_inlet)
• Bin number of lowest channel of OPC include in summation of N_CCN(N_CCN_bin_number)
• First stage monitor voltage(CCN_first_stage_monitor_voltage)
• AOS CCN volumetric flowrate of sample air(CCN_Q_sample)
• AOS CCN sample pressure(CCN_P_sample)
• AOS CCN temperature of sample air entering the column(CCN_T_sample)
• AOS CCN (read) temperature at bottom of column(CCN_t_read_TEC3)
• AOS CCN observed temperature at middle of column(CCN_t_read_TEC2)
• base time in epoch(base_time)