DQRID : D140516.1
Start DateStart TimeEnd DateEnd Time
05/12/2014233705/14/20141447
more
Subject:
TMP/XSACR/M1 - Transmitter failure
DataStreams:tmpxsacrspeccmaskxpolM1.a0, tmpxsacrcwrhiM1.a1, tmpxsacrspeccmaskcopolM1.a0,
tmpxsacrcrrasterM1.a1, tmpxsacrzppiM1.a1, tmpxsacrblrhiM1.a1, tmpxsacrvptM1.a1, tmpxsacrcrcalM1.a1,
tmpxsacrawrhiM1.a1, tmpxsacrppiM1.a1, tmpxsacrslrM1.a1, tmpxsacrhsrhiM1.a1
Description:
The transmitter had a modulator fault. As a result the transmitter was not firing pulses 
and the received signal was noise.
Suggestions: 
The data cannot be corrected. The cloud observatiosn are missing.
Measurements:tmpxsacrcrrasterM1.a1:
  • Transmit power(r_calib_xmit_power_h)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Signal-to-noise-ratio(snr)
  • Beam Elevation Angle(elevation)
  • Follow mode(follow_mode)
  • type_of_instrument(instrument_type)
  • Scan mode for sweep(sweep_mode)
  • Sky power, cross-polar(sky_power_xpol)
  • Pulse width(pulse_width)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Polarization mode(polarization_mode)
  • Index for the calibration that applies to each ray(r_calib_index)
  • data_volume_index_number(volume_number)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • data_volume_start_time_utc(time_coverage_start)
  • transmit_pulse_mode(prt_mode)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • pulse_repetition_frequency(prt)
  • Distance to the center of the corresponding range bin(range)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • reflectivity(reflectivity)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Time of the calibration that applies to each ray(r_calib_time)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Number of samples used to compute moments(n_samples)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Sky power, copolar(sky_power_copol)
  • platform_type(platform_type)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Sweep number, zero-based count(sweep_number)
  • Azimuth of Radar Ray(azimuth)
  • Unambiguous range(unambiguous_range)
  • Pulse width for this calibration(r_calib_pulse_width)
  • ray_target_fixed_angle(fixed_angle)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Primary axis of rotation(primary_axis)
  • Time corresponding to last radial in file(time_coverage_end)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • radiation_frequency(frequency)
  • Sky noise, copolar(sky_noise_copol)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Mean doppler velocity(mean_doppler_velocity)
  • altitude_above_ground_level(altitude_agl)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
more
tmpxsacrspeccmaskxpolM1.a0:
  • Spectral velocity bins(velocity_bins)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Distance to the center of the corresponding range bin(range)
  • Spectra(spectra)
  • Azimuth of Radar Ray(azimuth)
  • Signal-to-noise ratio(signal_to_noise_ratio)
  • Locator Mask for Spectra(locator_mask)
  • Beam Elevation Angle(elevation)
  • Mean doppler velocity(mean_doppler_velocity)
  • reflectivity(reflectivity)
more
tmpxsacrcrcalM1.a1:
  • Unambiguous range(unambiguous_range)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Pulse width(pulse_width)
  • ray_target_fixed_angle(fixed_angle)
  • reflectivity(reflectivity)
  • Distance to the center of the corresponding range bin(range)
  • transmit_pulse_mode(prt_mode)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Number of samples used to compute moments(n_samples)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Time of the calibration that applies to each ray(r_calib_time)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • radiation_frequency(frequency)
  • Signal-to-noise-ratio(snr)
  • Sky power, cross-polar(sky_power_xpol)
  • Index for the calibration that applies to each ray(r_calib_index)
  • Transmit power(r_calib_xmit_power_h)
  • Sky power, copolar(sky_power_copol)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • type_of_instrument(instrument_type)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Polarization mode(polarization_mode)
  • Pulse width for this calibration(r_calib_pulse_width)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Azimuth of Radar Ray(azimuth)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • data_volume_index_number(volume_number)
  • Time corresponding to last radial in file(time_coverage_end)
  • Beam Elevation Angle(elevation)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Sky noise, copolar(sky_noise_copol)
  • pulse_repetition_frequency(prt)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • altitude_above_ground_level(altitude_agl)
  • data_volume_start_time_utc(time_coverage_start)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Primary axis of rotation(primary_axis)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Mean doppler velocity(mean_doppler_velocity)
  • platform_type(platform_type)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Sweep number, zero-based count(sweep_number)
  • Scan mode for sweep(sweep_mode)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • base time in epoch(base_time)
  • Follow mode(follow_mode)
more
tmpxsacrppiM1.a1:
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • data_volume_index_number(volume_number)
  • Signal-to-noise-ratio(snr)
  • ray_target_fixed_angle(fixed_angle)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • base time in epoch(base_time)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • altitude_above_ground_level(altitude_agl)
  • transmit_pulse_mode(prt_mode)
  • Number of samples used to compute moments(n_samples)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Time corresponding to last radial in file(time_coverage_end)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Time of the calibration that applies to each ray(r_calib_time)
  • Primary axis of rotation(primary_axis)
  • Distance to the center of the corresponding range bin(range)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • Follow mode(follow_mode)
  • Sky power, copolar(sky_power_copol)
  • Azimuth of Radar Ray(azimuth)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • platform_type(platform_type)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • Polarization mode(polarization_mode)
  • Scan mode for sweep(sweep_mode)
  • Sky power, cross-polar(sky_power_xpol)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Transmit power(r_calib_xmit_power_h)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Unambiguous range(unambiguous_range)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • pulse_repetition_frequency(prt)
  • radiation_frequency(frequency)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Pulse width for this calibration(r_calib_pulse_width)
  • Sky noise, copolar(sky_noise_copol)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Mean doppler velocity(mean_doppler_velocity)
  • Sweep number, zero-based count(sweep_number)
  • data_volume_start_time_utc(time_coverage_start)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Pulse width(pulse_width)
  • Beam Elevation Angle(elevation)
  • type_of_instrument(instrument_type)
  • Index for the calibration that applies to each ray(r_calib_index)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • reflectivity(reflectivity)
more
tmpxsacrvptM1.a1:
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • transmit_pulse_mode(prt_mode)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Pulse width for this calibration(r_calib_pulse_width)
  • Signal-to-noise-ratio(snr)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • Sky noise, copolar(sky_noise_copol)
  • Unambiguous range(unambiguous_range)
  • Beam Elevation Angle(elevation)
  • platform_type(platform_type)
  • Sweep number, zero-based count(sweep_number)
  • Primary axis of rotation(primary_axis)
  • Time corresponding to last radial in file(time_coverage_end)
  • Number of samples used to compute moments(n_samples)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • altitude_above_ground_level(altitude_agl)
  • Sky power, cross-polar(sky_power_xpol)
  • Pulse width(pulse_width)
  • Transmit power(r_calib_xmit_power_h)
  • type_of_instrument(instrument_type)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Follow mode(follow_mode)
  • reflectivity(reflectivity)
  • radiation_frequency(frequency)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • Scan mode for sweep(sweep_mode)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • data_volume_start_time_utc(time_coverage_start)
  • Index for the calibration that applies to each ray(r_calib_index)
  • Time of the calibration that applies to each ray(r_calib_time)
  • ray_target_fixed_angle(fixed_angle)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • pulse_repetition_frequency(prt)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Sky power, copolar(sky_power_copol)
  • Mean doppler velocity(mean_doppler_velocity)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Polarization mode(polarization_mode)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Distance to the center of the corresponding range bin(range)
  • data_volume_index_number(volume_number)
  • Azimuth of Radar Ray(azimuth)
more
tmpxsacrcwrhiM1.a1:
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • Index for the calibration that applies to each ray(r_calib_index)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Polarization mode(polarization_mode)
  • Number of samples used to compute moments(n_samples)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Transmit power(r_calib_xmit_power_h)
  • Time corresponding to last radial in file(time_coverage_end)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Azimuth of Radar Ray(azimuth)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • reflectivity(reflectivity)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Unambiguous range(unambiguous_range)
  • Pulse width(pulse_width)
  • Pulse width for this calibration(r_calib_pulse_width)
  • type_of_instrument(instrument_type)
  • Sky power, cross-polar(sky_power_xpol)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Time of the calibration that applies to each ray(r_calib_time)
  • platform_type(platform_type)
  • pulse_repetition_frequency(prt)
  • altitude_above_ground_level(altitude_agl)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • Primary axis of rotation(primary_axis)
  • Follow mode(follow_mode)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Sweep number, zero-based count(sweep_number)
  • Sky noise, copolar(sky_noise_copol)
  • ray_target_fixed_angle(fixed_angle)
  • Beam Elevation Angle(elevation)
  • Mean doppler velocity(mean_doppler_velocity)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Sky power, copolar(sky_power_copol)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Scan mode for sweep(sweep_mode)
  • data_volume_start_time_utc(time_coverage_start)
  • data_volume_index_number(volume_number)
  • Distance to the center of the corresponding range bin(range)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Signal-to-noise-ratio(snr)
  • radiation_frequency(frequency)
  • transmit_pulse_mode(prt_mode)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
more
tmpxsacrawrhiM1.a1:
  • Primary axis of rotation(primary_axis)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • altitude_above_ground_level(altitude_agl)
  • transmit_pulse_mode(prt_mode)
  • Time of the calibration that applies to each ray(r_calib_time)
  • data_volume_index_number(volume_number)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Sky noise, copolar(sky_noise_copol)
  • platform_type(platform_type)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Distance to the center of the corresponding range bin(range)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Mean doppler velocity(mean_doppler_velocity)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • reflectivity(reflectivity)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • pulse_repetition_frequency(prt)
  • Follow mode(follow_mode)
  • Sweep number, zero-based count(sweep_number)
  • Unambiguous range(unambiguous_range)
  • Azimuth of Radar Ray(azimuth)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • Polarization mode(polarization_mode)
  • Time corresponding to last radial in file(time_coverage_end)
  • Sky power, copolar(sky_power_copol)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Index for the calibration that applies to each ray(r_calib_index)
  • ray_target_fixed_angle(fixed_angle)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Signal-to-noise-ratio(snr)
  • Pulse width for this calibration(r_calib_pulse_width)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • Number of samples used to compute moments(n_samples)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Beam Elevation Angle(elevation)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • Pulse width(pulse_width)
  • Sky power, cross-polar(sky_power_xpol)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • data_volume_start_time_utc(time_coverage_start)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • radiation_frequency(frequency)
  • Scan mode for sweep(sweep_mode)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • Transmit power(r_calib_xmit_power_h)
  • type_of_instrument(instrument_type)
more
tmpxsacrzppiM1.a1:
  • Sky power, cross-polar(sky_power_xpol)
  • ray_target_fixed_angle(fixed_angle)
  • Signal-to-noise-ratio(snr)
  • type_of_instrument(instrument_type)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Transmit power(r_calib_xmit_power_h)
  • Pulse width(pulse_width)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • radiation_frequency(frequency)
  • Scan mode for sweep(sweep_mode)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • transmit_pulse_mode(prt_mode)
  • platform_type(platform_type)
  • data_volume_start_time_utc(time_coverage_start)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Sweep number, zero-based count(sweep_number)
  • Follow mode(follow_mode)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • pulse_repetition_frequency(prt)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Distance to the center of the corresponding range bin(range)
  • Primary axis of rotation(primary_axis)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • Azimuth of Radar Ray(azimuth)
  • Sky power, copolar(sky_power_copol)
  • Pulse width for this calibration(r_calib_pulse_width)
  • Number of samples used to compute moments(n_samples)
  • altitude_above_ground_level(altitude_agl)
  • data_volume_index_number(volume_number)
  • reflectivity(reflectivity)
  • Mean doppler velocity(mean_doppler_velocity)
  • Polarization mode(polarization_mode)
  • Index for the calibration that applies to each ray(r_calib_index)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • Sky noise, copolar(sky_noise_copol)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Time of the calibration that applies to each ray(r_calib_time)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Unambiguous range(unambiguous_range)
  • Time corresponding to last radial in file(time_coverage_end)
  • Beam Elevation Angle(elevation)
more
tmpxsacrblrhiM1.a1:
  • type_of_instrument(instrument_type)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Number of samples used to compute moments(n_samples)
  • ray_target_fixed_angle(fixed_angle)
  • Sky noise, copolar(sky_noise_copol)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • transmit_pulse_mode(prt_mode)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • Azimuth of Radar Ray(azimuth)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Pulse width for this calibration(r_calib_pulse_width)
  • Pulse width(pulse_width)
  • Signal-to-noise-ratio(snr)
  • reflectivity(reflectivity)
  • platform_type(platform_type)
  • Transmit power(r_calib_xmit_power_h)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • Mean doppler velocity(mean_doppler_velocity)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • Primary axis of rotation(primary_axis)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • Time of the calibration that applies to each ray(r_calib_time)
  • Sky power, copolar(sky_power_copol)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Beam Elevation Angle(elevation)
  • pulse_repetition_frequency(prt)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Sweep number, zero-based count(sweep_number)
  • Time corresponding to last radial in file(time_coverage_end)
  • altitude_above_ground_level(altitude_agl)
  • Sky power, cross-polar(sky_power_xpol)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Unambiguous range(unambiguous_range)
  • Distance to the center of the corresponding range bin(range)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • data_volume_index_number(volume_number)
  • radiation_frequency(frequency)
  • data_volume_start_time_utc(time_coverage_start)
  • Follow mode(follow_mode)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Scan mode for sweep(sweep_mode)
  • Index for the calibration that applies to each ray(r_calib_index)
  • Polarization mode(polarization_mode)
more
tmpxsacrspeccmaskcopolM1.a0:
  • Spectra(spectra)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Locator Mask for Spectra(locator_mask)
  • Azimuth of Radar Ray(azimuth)
  • Beam Elevation Angle(elevation)
  • Mean doppler velocity(mean_doppler_velocity)
  • Distance to the center of the corresponding range bin(range)
  • Signal-to-noise ratio(signal_to_noise_ratio)
  • Spectral velocity bins(velocity_bins)
  • reflectivity(reflectivity)
more
tmpxsacrhsrhiM1.a1:
  • platform_type(platform_type)
  • Transmit power(r_calib_xmit_power_h)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Sky power, cross-polar(sky_power_xpol)
  • Sky power, copolar(sky_power_copol)
  • Azimuth of Radar Ray(azimuth)
  • Unambiguous range(unambiguous_range)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • data_volume_index_number(volume_number)
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Beam Elevation Angle(elevation)
  • pulse_repetition_frequency(prt)
  • Sky noise, cross-polarization(sky_noise_xpol)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • Scan mode for sweep(sweep_mode)
  • Time of the calibration that applies to each ray(r_calib_time)
  • Sky noise, copolar(sky_noise_copol)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Primary axis of rotation(primary_axis)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • altitude_above_ground_level(altitude_agl)
  • base time in epoch(base_time)
  • Number of samples used to compute moments(n_samples)
  • Mean doppler velocity(mean_doppler_velocity)
  • Sweep number, zero-based count(sweep_number)
  • Signal-to-noise-ratio(snr)
  • transmit_pulse_mode(prt_mode)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • Follow mode(follow_mode)
  • reflectivity(reflectivity)
  • Cross-polar propagation phase shift(cross_polar_differential_phase)
  • type_of_instrument(instrument_type)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Index for the calibration that applies to each ray(r_calib_index)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • Polarization mode(polarization_mode)
  • Time corresponding to last radial in file(time_coverage_end)
  • data_volume_start_time_utc(time_coverage_start)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Distance to the center of the corresponding range bin(range)
  • Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
  • Pulse width(pulse_width)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • ray_target_fixed_angle(fixed_angle)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
  • radiation_frequency(frequency)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • Pulse width for this calibration(r_calib_pulse_width)
more
tmpxsacrslrM1.a1:
  • Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
  • Index for the calibration that applies to each ray(r_calib_index)
  • Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
  • antenna_is_in_transition_between_sweeps(antenna_transition)
  • half_power_radar_beam_width_h_channel(radar_beam_width_h)
  • type_of_instrument(instrument_type)
  • Radar beam width, vertical channel(radar_beam_width_v)
  • Unambiguous range(unambiguous_range)
  • Transmit power(r_calib_xmit_power_h)
  • Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
  • Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
  • Beam Elevation Angle(elevation)
  • Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
  • Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
  • Scan rate, positive for clockwise or increasing elevation(scan_rate)
  • Nominal radar antenna gain, h channel(radar_antenna_gain_h)
  • Nominal radar antenna gain, v channel(radar_antenna_gain_v)
  • reflectivity(reflectivity)
  • Scan mode for sweep(sweep_mode)
  • Time of the calibration that applies to each ray(r_calib_time)
  • Time index of last ray in sweep, 0-based(sweep_end_ray_index)
  • Signal-to-noise-ratio(snr)
  • Pulse width for this calibration(r_calib_pulse_width)
  • ray_target_fixed_angle(fixed_angle)
  • Linear depolarization ratio(linear_depolarization_ratio)
  • Polarization mode(polarization_mode)
  • Number of samples used to compute moments(n_samples)
  • Mean doppler velocity(mean_doppler_velocity)
  • transmit_pulse_mode(prt_mode)
  • platform_type(platform_type)
  • Unambiguous Doppler velocity(nyquist_velocity)
  • Follow mode(follow_mode)
  • Azimuth of Radar Ray(azimuth)
  • Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
  • radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
  • Time corresponding to last radial in file(time_coverage_end)
  • Pulse width(pulse_width)
  • Distance to the center of the corresponding range bin(range)
  • altitude_above_ground_level(altitude_agl)
  • Primary axis of rotation(primary_axis)
  • data_volume_index_number(volume_number)
  • data_volume_start_time_utc(time_coverage_start)
  • calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
  • radiation_frequency(frequency)
  • Sweep number, zero-based count(sweep_number)
  • pulse_repetition_frequency(prt)
  • Radar measured transmit power, h channel(radar_measured_transmit_power_h)
  • Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
  • Index of first ray in sweep, 0-based(sweep_start_ray_index)
more

Close this window