Subject: | TMP/RWP/M1 - Decreased sensitivity and range |
DataStreams: | tmp1290bsrwpwindavgM1.b1, tmp1290bsrwpspeclolowprecipM1.a0, tmp1290bsrwpprecipavgM1.b1, tmp1290bsrwpspeclowprecipM1.a0, tmp1290bsrwpspeclolowwindM1.a0, tmp1290bsrwpspeclowwindM1.a0
|
Description: | Decreased sensitivity and range. Otherwise, data quality likely OK. |
Suggestions: | Expect reduced range |
Measurements: | tmp1290bsrwpspeclowprecipM1.a0: - Number of FFT points in measurement(num_fft_points)
- Height of center of first gate above ground level(first_gate_height)
- Beam azimuth angle(beam_azimuth)
- Row vector which describes the noise threshold for each gate(noise_threshold)
- Mode number(mode_number)
- Beam number(beam_number)
- First reported spectra bin(first_reported_spectra_bin)
- Beam zenith, nominal(beam_zenith)
- Spectra(spectra)
- Number of time domain integrations(num_time_domain_integrations)
- Number of points per spectra(num_spectral_points)
- Pulse width(pulse_width)
- FFT frequency spacing(fft_frequency_spacing)
- Number of frequency domain integrations(num_frequency_domain_integrations)
- Period between two pulses(interpulse_period)
- Interval between gates(gate_interval)
more
tmp1290bsrwpspeclolowprecipM1.a0: - FFT frequency spacing(fft_frequency_spacing)
- Number of points per spectra(num_spectral_points)
- Interval between gates(gate_interval)
- Spectra(spectra)
- Mode number(mode_number)
- Period between two pulses(interpulse_period)
- Beam azimuth angle(beam_azimuth)
- Pulse width(pulse_width)
- Beam number(beam_number)
- Number of frequency domain integrations(num_frequency_domain_integrations)
- Beam zenith, nominal(beam_zenith)
- Height of center of first gate above ground level(first_gate_height)
- Row vector which describes the noise threshold for each gate(noise_threshold)
- Number of FFT points in measurement(num_fft_points)
- First reported spectra bin(first_reported_spectra_bin)
- Number of time domain integrations(num_time_domain_integrations)
more
tmp1290bsrwpprecipavgM1.b1: - Number of range gates sampled.(num_range_gates)
- The standard deviations for vertical_velocity.(vertical_velocity_std)
- Mode number(mode_number)
- heights of the boundaries of each layer(level)
- Pulse width(pulse_width)
- Period between two pulses(interpulse_period)
- Mode index(mode)
- Name of wind profiler operational mode.(mode_name)
- Fast Fourier Transform length.(fourier_transform_length)
- Flag value indicating if the mode was missing from the raw data file.(missing_mode)
- Number of reporting levels for this mode.(num_levels)
- Transmit power level setting.(transmit_power_level_setting)
- Number of time domain integrations.(num_time_domain)
- Number of phase code bits in a pulse.(num_code_bits)
- Vertical velocity.(vertical_velocity)
- Number of frequency domain integrations.(num_frequency_domain)
- Height(height)
- MET data averaging interval.(averaging_interval)
more
tmp1290bsrwpwindavgM1.b1: - Mode index(mode)
- Meridional wind speed.(wind_v)
- 10m wind u-component(wind_u)
- Azimuth of Radar Ray(azimuth)
- Vertical wind speed.(wind_w)
- Beam Number(beam)
- MET data averaging interval.(averaging_interval)
- Height(height)
- Flag value indicating if the mode was missing from the raw data file.(missing_mode)
- Quality control interval.(wind_quality_interval)
- The number of measurements averaged in radial_velocity.(radial_velocity_navg)
- Direction from which the wind blows, with respect to Geographic or Magnetic
north(wind_direction) - Number of phase code bits in a pulse.(num_code_bits)
- Number of reporting levels for this mode.(num_levels)
- Fast Fourier Transform length.(fourier_transform_length)
- Number of time domain integrations.(num_time_domain)
- Number of azimuth beam positions.(num_azimuth_beams)
- Mode number(mode_number)
- A decimal value between 0 and 1 indicating the quality of the winds at the given
level.(wind_quality) - The standard deviations for wind_w.(wind_w_std)
- Transmit power level setting.(transmit_power_level_setting)
- Name of wind profiler operational mode.(mode_name)
- Number of frequency domain integrations.(num_frequency_domain)
- The spectral width of the atmospheric signal associated with radial_velocity.(radial_velocity_width)
- Standard Deviation of 1s wind speed at the ground station in one minute,
standard deviation(wind_speed_std) - base time in epoch(base_time)
- Radial velocity(radial_velocity)
- Pulse width(pulse_width)
- Period between two pulses(interpulse_period)
- Number of range gates sampled.(num_range_gates)
- Angle from vertical.(zenith_angle)
- The power of the atmospheric signal associated with radial_velocity.(radial_velocity_power)
- heights of the boundaries of each layer(level)
- Wind speed 5m AGL at the ground station(wind_speed)
- The signal to noise ratio of the atmospheric signal associated with
radial_velocity.(radial_velocity_snr) more
tmp1290bsrwpspeclolowwindM1.a0: - Interval between gates(gate_interval)
- Period between two pulses(interpulse_period)
- Number of time domain integrations(num_time_domain_integrations)
- Row vector which describes the noise threshold for each gate(noise_threshold)
- Beam azimuth angle(beam_azimuth)
- Pulse width(pulse_width)
- Mode number(mode_number)
- FFT frequency spacing(fft_frequency_spacing)
- Beam number(beam_number)
- Spectra(spectra)
- Number of FFT points in measurement(num_fft_points)
- Beam zenith, nominal(beam_zenith)
- First reported spectra bin(first_reported_spectra_bin)
- Number of frequency domain integrations(num_frequency_domain_integrations)
- Height of center of first gate above ground level(first_gate_height)
- Number of points per spectra(num_spectral_points)
more
tmp1290bsrwpspeclowwindM1.a0: - Row vector which describes the noise threshold for each gate(noise_threshold)
- First reported spectra bin(first_reported_spectra_bin)
- Interval between gates(gate_interval)
- Number of FFT points in measurement(num_fft_points)
- Spectra(spectra)
- Beam zenith, nominal(beam_zenith)
- Beam azimuth angle(beam_azimuth)
- FFT frequency spacing(fft_frequency_spacing)
- Number of points per spectra(num_spectral_points)
- Period between two pulses(interpulse_period)
- Number of time domain integrations(num_time_domain_integrations)
- Mode number(mode_number)
- Pulse width(pulse_width)
- Beam number(beam_number)
- Number of frequency domain integrations(num_frequency_domain_integrations)
- Height of center of first gate above ground level(first_gate_height)
more
|