Measurements: | sgpkasacrcrrhiC1.b1: - Unambiguous Doppler velocity(nyquist_velocity)
- reflectivity(reflectivity)
- Time of the calibration that applies to each ray(r_calib_time)
- type_of_instrument(instrument_type)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Time corresponding to last radial in file(time_coverage_end)
- pulse_repetition_frequency(prt)
- platform_type(platform_type)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Linear depolarization ratio(linear_depolarization_ratio)
- radiation_frequency(frequency)
- Pulse width for this calibration(r_calib_pulse_width)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Index for the calibration that applies to each ray(r_calib_index)
- Distance to the center of the corresponding range bin(range)
- Signal-to-noise-ratio(snr)
- Azimuth of Radar Ray(azimuth)
- data_volume_index_number(volume_number)
- Number of samples used to compute moments(n_samples)
- Follow mode(follow_mode)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Scan mode for sweep(sweep_mode)
- transmit_pulse_mode(prt_mode)
- Pulse width(pulse_width)
- Transmit power(r_calib_xmit_power_h)
- Polarization mode(polarization_mode)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Unambiguous range(unambiguous_range)
- Radar beam width, vertical channel(radar_beam_width_v)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- data_volume_start_time_utc(time_coverage_start)
- Mean doppler velocity(mean_doppler_velocity)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Primary axis of rotation(primary_axis)
- Sweep number, zero-based count(sweep_number)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Beam Elevation Angle(elevation)
- ray_target_fixed_angle(fixed_angle)
more
sgpkasacrblrhiC1.a1: - reflectivity(reflectivity)
- Mean doppler velocity(mean_doppler_velocity)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Primary axis of rotation(primary_axis)
- Time of the calibration that applies to each ray(r_calib_time)
- pulse_repetition_frequency(prt)
- data_volume_start_time_utc(time_coverage_start)
- Time corresponding to last radial in file(time_coverage_end)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Sweep number, zero-based count(sweep_number)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Index for the calibration that applies to each ray(r_calib_index)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- transmit_pulse_mode(prt_mode)
- Linear depolarization ratio(linear_depolarization_ratio)
- Pulse width(pulse_width)
- Sky noise, cross-polarization(sky_noise_xpol)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- data_volume_index_number(volume_number)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Follow mode(follow_mode)
- Number of samples used to compute moments(n_samples)
- Transmit power(r_calib_xmit_power_h)
- radiation_frequency(frequency)
- Sky power, cross-polar(sky_power_xpol)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Pulse width for this calibration(r_calib_pulse_width)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Sky noise, copolar(sky_noise_copol)
- Unambiguous Doppler velocity(nyquist_velocity)
- base time in epoch(base_time)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Sky power, copolar(sky_power_copol)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Beam Elevation Angle(elevation)
- Unambiguous range(unambiguous_range)
- ray_target_fixed_angle(fixed_angle)
- Distance to the center of the corresponding range bin(range)
- Scan mode for sweep(sweep_mode)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Radar beam width, vertical channel(radar_beam_width_v)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- platform_type(platform_type)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- type_of_instrument(instrument_type)
- Polarization mode(polarization_mode)
- Azimuth of Radar Ray(azimuth)
- Signal-to-noise-ratio(snr)
more
sgpkasacrblrhiC1.b1: - Unambiguous range(unambiguous_range)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- type_of_instrument(instrument_type)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Primary axis of rotation(primary_axis)
- Time of the calibration that applies to each ray(r_calib_time)
- Pulse width for this calibration(r_calib_pulse_width)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- reflectivity(reflectivity)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Unambiguous Doppler velocity(nyquist_velocity)
- Polarization mode(polarization_mode)
- Radar beam width, vertical channel(radar_beam_width_v)
- ray_target_fixed_angle(fixed_angle)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Signal-to-noise-ratio(snr)
- Azimuth of Radar Ray(azimuth)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Sweep number, zero-based count(sweep_number)
- transmit_pulse_mode(prt_mode)
- Index for the calibration that applies to each ray(r_calib_index)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- data_volume_index_number(volume_number)
- Distance to the center of the corresponding range bin(range)
- platform_type(platform_type)
- Scan mode for sweep(sweep_mode)
- Number of samples used to compute moments(n_samples)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Beam Elevation Angle(elevation)
- Linear depolarization ratio(linear_depolarization_ratio)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- radiation_frequency(frequency)
- Time corresponding to last radial in file(time_coverage_end)
- Pulse width(pulse_width)
- Transmit power(r_calib_xmit_power_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- pulse_repetition_frequency(prt)
- data_volume_start_time_utc(time_coverage_start)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Follow mode(follow_mode)
- Mean doppler velocity(mean_doppler_velocity)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
more
sgpkasacrspeccmaskxpolC1.a0: - reflectivity(reflectivity)
- Signal-to-noise ratio(signal_to_noise_ratio)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Spectral velocity bins(velocity_bins)
- Distance to the center of the corresponding range bin(range)
- Beam Elevation Angle(elevation)
- Spectra(spectra)
- Locator Mask for Spectra(locator_mask)
- Mean doppler velocity(mean_doppler_velocity)
- Azimuth of Radar Ray(azimuth)
more
sgpkasacrslrC1.a1: - Follow mode(follow_mode)
- Transmit power(r_calib_xmit_power_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- transmit_pulse_mode(prt_mode)
- Unambiguous Doppler velocity(nyquist_velocity)
- Signal-to-noise-ratio(snr)
- data_volume_index_number(volume_number)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Pulse width(pulse_width)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Index for the calibration that applies to each ray(r_calib_index)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- radiation_frequency(frequency)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Sky noise, cross-polarization(sky_noise_xpol)
- Beam Elevation Angle(elevation)
- Scan mode for sweep(sweep_mode)
- platform_type(platform_type)
- Azimuth of Radar Ray(azimuth)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- ray_target_fixed_angle(fixed_angle)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Pulse width for this calibration(r_calib_pulse_width)
- Linear depolarization ratio(linear_depolarization_ratio)
- Radar beam width, vertical channel(radar_beam_width_v)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Time corresponding to last radial in file(time_coverage_end)
- Time of the calibration that applies to each ray(r_calib_time)
- Polarization mode(polarization_mode)
- Primary axis of rotation(primary_axis)
- Sky power, copolar(sky_power_copol)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Sky noise, copolar(sky_noise_copol)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- pulse_repetition_frequency(prt)
- Sky power, cross-polar(sky_power_xpol)
- Distance to the center of the corresponding range bin(range)
- Unambiguous range(unambiguous_range)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Mean doppler velocity(mean_doppler_velocity)
- data_volume_start_time_utc(time_coverage_start)
- Number of samples used to compute moments(n_samples)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- reflectivity(reflectivity)
- Sweep number, zero-based count(sweep_number)
- type_of_instrument(instrument_type)
more
sgpkasacrslrC1.b1: - half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Follow mode(follow_mode)
- Radar beam width, vertical channel(radar_beam_width_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Unambiguous range(unambiguous_range)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Scan mode for sweep(sweep_mode)
- Time corresponding to last radial in file(time_coverage_end)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Pulse width(pulse_width)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- platform_type(platform_type)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- radiation_frequency(frequency)
- Sweep number, zero-based count(sweep_number)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Unambiguous Doppler velocity(nyquist_velocity)
- Primary axis of rotation(primary_axis)
- Number of samples used to compute moments(n_samples)
- Mean doppler velocity(mean_doppler_velocity)
- reflectivity(reflectivity)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- pulse_repetition_frequency(prt)
- Time of the calibration that applies to each ray(r_calib_time)
- Index for the calibration that applies to each ray(r_calib_index)
- Distance to the center of the corresponding range bin(range)
- type_of_instrument(instrument_type)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Pulse width for this calibration(r_calib_pulse_width)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Azimuth of Radar Ray(azimuth)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Polarization mode(polarization_mode)
- ray_target_fixed_angle(fixed_angle)
- transmit_pulse_mode(prt_mode)
- Signal-to-noise-ratio(snr)
- data_volume_index_number(volume_number)
- Linear depolarization ratio(linear_depolarization_ratio)
- Transmit power(r_calib_xmit_power_h)
- Beam Elevation Angle(elevation)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- data_volume_start_time_utc(time_coverage_start)
more
sgpkasacrrhiC1.b1: - Time corresponding to last radial in file(time_coverage_end)
- Distance to the center of the corresponding range bin(range)
- Azimuth of Radar Ray(azimuth)
- Unambiguous Doppler velocity(nyquist_velocity)
- data_volume_index_number(volume_number)
- Index for the calibration that applies to each ray(r_calib_index)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Linear depolarization ratio(linear_depolarization_ratio)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Unambiguous range(unambiguous_range)
- Scan mode for sweep(sweep_mode)
- Follow mode(follow_mode)
- data_volume_start_time_utc(time_coverage_start)
- Signal-to-noise-ratio(snr)
- type_of_instrument(instrument_type)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- platform_type(platform_type)
- Beam Elevation Angle(elevation)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- pulse_repetition_frequency(prt)
- radiation_frequency(frequency)
- Time of the calibration that applies to each ray(r_calib_time)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Polarization mode(polarization_mode)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Primary axis of rotation(primary_axis)
- Sweep number, zero-based count(sweep_number)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Radar beam width, vertical channel(radar_beam_width_v)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Pulse width(pulse_width)
- ray_target_fixed_angle(fixed_angle)
- Transmit power(r_calib_xmit_power_h)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Mean doppler velocity(mean_doppler_velocity)
- transmit_pulse_mode(prt_mode)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- reflectivity(reflectivity)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Pulse width for this calibration(r_calib_pulse_width)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Number of samples used to compute moments(n_samples)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
more
sgpkasacrppiC1.b1: - Time of the calibration that applies to each ray(r_calib_time)
- Primary axis of rotation(primary_axis)
- Radar beam width, vertical channel(radar_beam_width_v)
- Linear depolarization ratio(linear_depolarization_ratio)
- pulse_repetition_frequency(prt)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Sweep number, zero-based count(sweep_number)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Polarization mode(polarization_mode)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Distance to the center of the corresponding range bin(range)
- Pulse width(pulse_width)
- Unambiguous range(unambiguous_range)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Unambiguous Doppler velocity(nyquist_velocity)
- Follow mode(follow_mode)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Azimuth of Radar Ray(azimuth)
- Mean doppler velocity(mean_doppler_velocity)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Beam Elevation Angle(elevation)
- reflectivity(reflectivity)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- platform_type(platform_type)
- radiation_frequency(frequency)
- Transmit power(r_calib_xmit_power_h)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- data_volume_start_time_utc(time_coverage_start)
- transmit_pulse_mode(prt_mode)
- ray_target_fixed_angle(fixed_angle)
- Scan mode for sweep(sweep_mode)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Time corresponding to last radial in file(time_coverage_end)
- Signal-to-noise-ratio(snr)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- type_of_instrument(instrument_type)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Pulse width for this calibration(r_calib_pulse_width)
- data_volume_index_number(volume_number)
- Index for the calibration that applies to each ray(r_calib_index)
- Number of samples used to compute moments(n_samples)
more
sgpkasacrppiC1.a1: - data_volume_start_time_utc(time_coverage_start)
- Sweep number, zero-based count(sweep_number)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Unambiguous range(unambiguous_range)
- platform_type(platform_type)
- Primary axis of rotation(primary_axis)
- pulse_repetition_frequency(prt)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Time offset from base_time(time_offset)
- Mean doppler velocity(mean_doppler_velocity)
- Unambiguous Doppler velocity(nyquist_velocity)
- Pulse width(pulse_width)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Sky power, copolar(sky_power_copol)
- ray_target_fixed_angle(fixed_angle)
- Sky power, cross-polar(sky_power_xpol)
- Scan mode for sweep(sweep_mode)
- Polarization mode(polarization_mode)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Sky noise, cross-polarization(sky_noise_xpol)
- Signal-to-noise-ratio(snr)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Number of samples used to compute moments(n_samples)
- type_of_instrument(instrument_type)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Linear depolarization ratio(linear_depolarization_ratio)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- transmit_pulse_mode(prt_mode)
- Beam Elevation Angle(elevation)
- Distance to the center of the corresponding range bin(range)
- Index for the calibration that applies to each ray(r_calib_index)
- radiation_frequency(frequency)
- Follow mode(follow_mode)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Azimuth of Radar Ray(azimuth)
- Transmit power(r_calib_xmit_power_h)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Pulse width for this calibration(r_calib_pulse_width)
- Radar beam width, vertical channel(radar_beam_width_v)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- reflectivity(reflectivity)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Time corresponding to last radial in file(time_coverage_end)
- Time of the calibration that applies to each ray(r_calib_time)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Sky noise, copolar(sky_noise_copol)
- data_volume_index_number(volume_number)
more
sgpkasacrcwrhiauxC1.a1: - Temperature measured by sensor on radar control board(local_temp)
- Modulator high voltage on(hv_on)
- Noise figure copolar(noise_figure_copol)
- IF unit temperature(temp_if_unit)
- Receiver gain cross-polar(receiver_gain_xpol)
- Receiver gain copolar(receiver_gain_copol)
- Modulator body current(voltage_body_current)
- Low noise amplifier temperature, vertical channel(temp_lna_v)
- Low noise amplifier temperature, horizontal channel(temp_lna_h)
- Phase-locked oscillator 1 lock status(plo1_lock_status)
- Coolant return temperature(temp_coolant_return)
- Transmitter fault status(transmitter_temp_fault)
- Azimuth of Radar Ray(azimuth)
- Delay for sample trigger to internal scope card, relative to ADC trigger(scope_delay)
- EIKA temperature(temp_eika)
- Noise figure cross-polar(noise_figure_xpol)
- data_volume_index_number(volume_number)
- Positioner elevation motor current(el_motor_current)
- Voltage of 5.2V power supply(power_supply_5_2_v)
- Humidity measured by sensor on radar control board(local_humidity)
- Voltage of 28V power supply(power_supply_28v)
- Coolant supply temperature(temp_coolant_supply)
- Positioner elevation velocity(elevation_scan_rate)
- Sweep counter in elevation(elevation_sweep_count)
- Phase-locked oscillator 3 lock status(plo3_lock_status)
- Modulator warmed up and ready to transmit(transmitter_ready)
- Modulator fault status(modulator_fault)
- Synchronization fault status(sync_fault)
- Temperature measured by probe inside antenna(remote_temp)
- DC power supply temperature(temp_dc_power_supply)
- Voltage of -5V power supply(power_supply_minus5v)
- Fault summary(fault_sum)
- Noise diode temperature, horizontal channel(temp_noise_diode_h)
- Sweep counter in azimuth(azimuth_sweep_count)
- Noise diode temperature, vertical channel(temp_noise_diode_v)
- Modulator temperature(temp_modulator)
- Power validity status(power_valid)
- Modulator collector current(voltage_modulator_collector_current)
- Humidity measured by probe inside antenna(remote_humidity)
- Positioner azimuth velocity(azimuth_scan_rate)
- Voltage proportional to modulator internal temperature(voltage_modulator_temperature)
- Positioner azimuth motor current(az_motor_current)
- Phase-locked oscillator 4 lock status(plo4_lock_status)
- Phase-locked oscillator 2 lock status(plo2_lock_status)
- Voltage of 5V power supply(power_supply_5v)
- Beam Elevation Angle(elevation)
- Voltage proportional to beam voltage, where beam voltage = -50 * value(voltage_beam)
- Voltage of 8V power supply(power_supply_8v)
- Voltage of 15V power supply(power_supply_15v)
- Description of current scanning mode(pacsi_call_stack)
- Modulator filament status(fil_delay)
- Voltage of 12V power supply(power_supply_12v)
more
sgpkasacrvptC1.a1: - Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- pulse_repetition_frequency(prt)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Unambiguous range(unambiguous_range)
- Sky power, copolar(sky_power_copol)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Distance to the center of the corresponding range bin(range)
- reflectivity(reflectivity)
- Polarization mode(polarization_mode)
- Follow mode(follow_mode)
- Mean doppler velocity(mean_doppler_velocity)
- Sky noise, copolar(sky_noise_copol)
- Scan mode for sweep(sweep_mode)
- Primary axis of rotation(primary_axis)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- platform_type(platform_type)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- transmit_pulse_mode(prt_mode)
- Number of samples used to compute moments(n_samples)
- Sweep number, zero-based count(sweep_number)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Transmit power(r_calib_xmit_power_h)
- radiation_frequency(frequency)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Beam Elevation Angle(elevation)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Time corresponding to last radial in file(time_coverage_end)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Index for the calibration that applies to each ray(r_calib_index)
- Radar beam width, vertical channel(radar_beam_width_v)
- Unambiguous Doppler velocity(nyquist_velocity)
- Signal-to-noise-ratio(snr)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- data_volume_start_time_utc(time_coverage_start)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Azimuth of Radar Ray(azimuth)
- Sky power, cross-polar(sky_power_xpol)
- Time of the calibration that applies to each ray(r_calib_time)
- Pulse width for this calibration(r_calib_pulse_width)
- Linear depolarization ratio(linear_depolarization_ratio)
- type_of_instrument(instrument_type)
- data_volume_index_number(volume_number)
- ray_target_fixed_angle(fixed_angle)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Pulse width(pulse_width)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Sky noise, cross-polarization(sky_noise_xpol)
more
sgpkasacrvptC1.b1: - Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Polarization mode(polarization_mode)
- type_of_instrument(instrument_type)
- transmit_pulse_mode(prt_mode)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- platform_type(platform_type)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Unambiguous Doppler velocity(nyquist_velocity)
- Beam Elevation Angle(elevation)
- reflectivity(reflectivity)
- Transmit power(r_calib_xmit_power_h)
- Follow mode(follow_mode)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Time of the calibration that applies to each ray(r_calib_time)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- data_volume_start_time_utc(time_coverage_start)
- Linear depolarization ratio(linear_depolarization_ratio)
- Pulse width(pulse_width)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Radar beam width, vertical channel(radar_beam_width_v)
- pulse_repetition_frequency(prt)
- Time corresponding to last radial in file(time_coverage_end)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- ray_target_fixed_angle(fixed_angle)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- radiation_frequency(frequency)
- Number of samples used to compute moments(n_samples)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- data_volume_index_number(volume_number)
- Scan mode for sweep(sweep_mode)
- Azimuth of Radar Ray(azimuth)
- Distance to the center of the corresponding range bin(range)
- Sweep number, zero-based count(sweep_number)
- Primary axis of rotation(primary_axis)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Index for the calibration that applies to each ray(r_calib_index)
- Mean doppler velocity(mean_doppler_velocity)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Signal-to-noise-ratio(snr)
- Unambiguous range(unambiguous_range)
- Pulse width for this calibration(r_calib_pulse_width)
more
sgpkasacrcwrhiC1.b1: - Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Pulse width(pulse_width)
- Number of samples used to compute moments(n_samples)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Mean doppler velocity(mean_doppler_velocity)
- Beam Elevation Angle(elevation)
- pulse_repetition_frequency(prt)
- data_volume_index_number(volume_number)
- Pulse width for this calibration(r_calib_pulse_width)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- transmit_pulse_mode(prt_mode)
- Index for the calibration that applies to each ray(r_calib_index)
- Azimuth of Radar Ray(azimuth)
- data_volume_start_time_utc(time_coverage_start)
- Transmit power(r_calib_xmit_power_h)
- Sweep number, zero-based count(sweep_number)
- Polarization mode(polarization_mode)
- Signal-to-noise-ratio(snr)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Unambiguous range(unambiguous_range)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- platform_type(platform_type)
- ray_target_fixed_angle(fixed_angle)
- type_of_instrument(instrument_type)
- Time of the calibration that applies to each ray(r_calib_time)
- Primary axis of rotation(primary_axis)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Radar beam width, vertical channel(radar_beam_width_v)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- reflectivity(reflectivity)
- radiation_frequency(frequency)
- Scan mode for sweep(sweep_mode)
- Time corresponding to last radial in file(time_coverage_end)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Unambiguous Doppler velocity(nyquist_velocity)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Linear depolarization ratio(linear_depolarization_ratio)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Distance to the center of the corresponding range bin(range)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Follow mode(follow_mode)
more
sgpkasacrcwrhiC1.a1: - Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- Time corresponding to last radial in file(time_coverage_end)
- Unambiguous range(unambiguous_range)
- Pulse width(pulse_width)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Linear depolarization ratio(linear_depolarization_ratio)
- Scan mode for sweep(sweep_mode)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- data_volume_start_time_utc(time_coverage_start)
- Sky noise, cross-polarization(sky_noise_xpol)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Follow mode(follow_mode)
- Sky power, cross-polar(sky_power_xpol)
- Number of samples used to compute moments(n_samples)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Distance to the center of the corresponding range bin(range)
- Sky power, copolar(sky_power_copol)
- reflectivity(reflectivity)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Radar beam width, vertical channel(radar_beam_width_v)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Time of the calibration that applies to each ray(r_calib_time)
- radiation_frequency(frequency)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Polarization mode(polarization_mode)
- Primary axis of rotation(primary_axis)
- ray_target_fixed_angle(fixed_angle)
- data_volume_index_number(volume_number)
- Signal-to-noise-ratio(snr)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Sweep number, zero-based count(sweep_number)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- type_of_instrument(instrument_type)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Mean doppler velocity(mean_doppler_velocity)
- Index for the calibration that applies to each ray(r_calib_index)
- Unambiguous Doppler velocity(nyquist_velocity)
- transmit_pulse_mode(prt_mode)
- Sky noise, copolar(sky_noise_copol)
- Pulse width for this calibration(r_calib_pulse_width)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Beam Elevation Angle(elevation)
- Transmit power(r_calib_xmit_power_h)
- platform_type(platform_type)
- pulse_repetition_frequency(prt)
- Azimuth of Radar Ray(azimuth)
more
sgpkasacrspeccmaskcopolC1.a0: - reflectivity(reflectivity)
- Signal-to-noise ratio(signal_to_noise_ratio)
- Azimuth of Radar Ray(azimuth)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Beam Elevation Angle(elevation)
- Spectra(spectra)
- Spectral velocity bins(velocity_bins)
- Distance to the center of the corresponding range bin(range)
- Mean doppler velocity(mean_doppler_velocity)
- Locator Mask for Spectra(locator_mask)
more
sgpkasacrhsrhiC1.a1: - Sweep number, zero-based count(sweep_number)
- Azimuth of Radar Ray(azimuth)
- Time of the calibration that applies to each ray(r_calib_time)
- Sky noise, copolar(sky_noise_copol)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- Scan mode for sweep(sweep_mode)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- transmit_pulse_mode(prt_mode)
- pulse_repetition_frequency(prt)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- type_of_instrument(instrument_type)
- data_volume_start_time_utc(time_coverage_start)
- reflectivity(reflectivity)
- Primary axis of rotation(primary_axis)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Radar beam width, vertical channel(radar_beam_width_v)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Time corresponding to last radial in file(time_coverage_end)
- radiation_frequency(frequency)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Pulse width(pulse_width)
- ray_target_fixed_angle(fixed_angle)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Linear depolarization ratio(linear_depolarization_ratio)
- Index for the calibration that applies to each ray(r_calib_index)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Number of samples used to compute moments(n_samples)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Sky power, cross-polar(sky_power_xpol)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Pulse width for this calibration(r_calib_pulse_width)
- Unambiguous range(unambiguous_range)
- Sky noise, cross-polarization(sky_noise_xpol)
- data_volume_index_number(volume_number)
- Unambiguous Doppler velocity(nyquist_velocity)
- Mean doppler velocity(mean_doppler_velocity)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Follow mode(follow_mode)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- platform_type(platform_type)
- Beam Elevation Angle(elevation)
- Polarization mode(polarization_mode)
- Transmit power(r_calib_xmit_power_h)
- Distance to the center of the corresponding range bin(range)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Signal-to-noise-ratio(snr)
- Sky power, copolar(sky_power_copol)
more
sgpkasacrhsrhiC1.b1: - Primary axis of rotation(primary_axis)
- Index for the calibration that applies to each ray(r_calib_index)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Mean doppler velocity(mean_doppler_velocity)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- Time of the calibration that applies to each ray(r_calib_time)
- Beam Elevation Angle(elevation)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Distance to the center of the corresponding range bin(range)
- Pulse width(pulse_width)
- reflectivity(reflectivity)
- Signal-to-noise-ratio(snr)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- data_volume_index_number(volume_number)
- Sweep number, zero-based count(sweep_number)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Follow mode(follow_mode)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Unambiguous Doppler velocity(nyquist_velocity)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- type_of_instrument(instrument_type)
- Azimuth of Radar Ray(azimuth)
- Transmit power(r_calib_xmit_power_h)
- Scan mode for sweep(sweep_mode)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Unambiguous range(unambiguous_range)
- data_volume_start_time_utc(time_coverage_start)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Polarization mode(polarization_mode)
- platform_type(platform_type)
- pulse_repetition_frequency(prt)
- Number of samples used to compute moments(n_samples)
- Linear depolarization ratio(linear_depolarization_ratio)
- transmit_pulse_mode(prt_mode)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Radar beam width, vertical channel(radar_beam_width_v)
- ray_target_fixed_angle(fixed_angle)
- radiation_frequency(frequency)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Time corresponding to last radial in file(time_coverage_end)
- Pulse width for this calibration(r_calib_pulse_width)
- antenna_is_in_transition_between_sweeps(antenna_transition)
more
sgpkasacrcrcalC1.a1: - Sweep number, zero-based count(sweep_number)
- data_volume_index_number(volume_number)
- Pulse width for this calibration(r_calib_pulse_width)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Sky noise, cross-polarization(sky_noise_xpol)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Unambiguous Doppler velocity(nyquist_velocity)
- Sky power, cross-polar(sky_power_xpol)
- transmit_pulse_mode(prt_mode)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- ray_target_fixed_angle(fixed_angle)
- Beam Elevation Angle(elevation)
- Sky noise, copolar(sky_noise_copol)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- pulse_repetition_frequency(prt)
- Time of the calibration that applies to each ray(r_calib_time)
- Sky power, copolar(sky_power_copol)
- Time corresponding to last radial in file(time_coverage_end)
- Polarization mode(polarization_mode)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Azimuth of Radar Ray(azimuth)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- type_of_instrument(instrument_type)
- Mean doppler velocity(mean_doppler_velocity)
- Scan mode for sweep(sweep_mode)
- data_volume_start_time_utc(time_coverage_start)
- radiation_frequency(frequency)
- Unambiguous range(unambiguous_range)
- Linear depolarization ratio(linear_depolarization_ratio)
- platform_type(platform_type)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Number of samples used to compute moments(n_samples)
- Pulse width(pulse_width)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Radar beam width, vertical channel(radar_beam_width_v)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Distance to the center of the corresponding range bin(range)
- reflectivity(reflectivity)
- Index for the calibration that applies to each ray(r_calib_index)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Signal-to-noise-ratio(snr)
- Follow mode(follow_mode)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Transmit power(r_calib_xmit_power_h)
- Primary axis of rotation(primary_axis)
more
sgpkasacrawrhiC1.a1: - Pulse width(pulse_width)
- data_volume_start_time_utc(time_coverage_start)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Sky noise, cross-polarization(sky_noise_xpol)
- pulse_repetition_frequency(prt)
- Follow mode(follow_mode)
- Sweep number, zero-based count(sweep_number)
- Sky power, cross-polar(sky_power_xpol)
- Primary axis of rotation(primary_axis)
- Sky power, copolar(sky_power_copol)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- platform_type(platform_type)
- Azimuth of Radar Ray(azimuth)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- reflectivity(reflectivity)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Radar beam width, vertical channel(radar_beam_width_v)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Distance to the center of the corresponding range bin(range)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Time of the calibration that applies to each ray(r_calib_time)
- Signal-to-noise-ratio(snr)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- Beam Elevation Angle(elevation)
- ray_target_fixed_angle(fixed_angle)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Index for the calibration that applies to each ray(r_calib_index)
- Transmit power(r_calib_xmit_power_h)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Unambiguous Doppler velocity(nyquist_velocity)
- Linear depolarization ratio(linear_depolarization_ratio)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Sky noise, copolar(sky_noise_copol)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Unambiguous range(unambiguous_range)
- Mean doppler velocity(mean_doppler_velocity)
- Time corresponding to last radial in file(time_coverage_end)
- Polarization mode(polarization_mode)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- radiation_frequency(frequency)
- type_of_instrument(instrument_type)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- transmit_pulse_mode(prt_mode)
- Pulse width for this calibration(r_calib_pulse_width)
- Number of samples used to compute moments(n_samples)
- data_volume_index_number(volume_number)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Scan mode for sweep(sweep_mode)
more
sgpkasacrawrhiC1.b1: - Noise power in noise source region for horizontal copolar channel 1(r_calib_noise_source_power_h)
- Noise power in noise source region for vertical cross-polar channel(r_calib_noise_source_power_v)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- pulse_repetition_frequency(prt)
- Pulse width(pulse_width)
- Mean doppler velocity(mean_doppler_velocity)
- type_of_instrument(instrument_type)
- Primary axis of rotation(primary_axis)
- Pulse width for this calibration(r_calib_pulse_width)
- Sweep number, zero-based count(sweep_number)
- Unambiguous Doppler velocity(nyquist_velocity)
- Follow mode(follow_mode)
- platform_type(platform_type)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Linear depolarization ratio(linear_depolarization_ratio)
- Polarization mode(polarization_mode)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- Radar measured transmit power, h channel(radar_measured_transmit_power_h)
- radiation_frequency(frequency)
- Unambiguous range(unambiguous_range)
- data_volume_start_time_utc(time_coverage_start)
- Distance to the center of the corresponding range bin(range)
- ray_target_fixed_angle(fixed_angle)
- Scan mode for sweep(sweep_mode)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- Number of samples used to compute moments(n_samples)
- Noise floor power for horizontal copolar channel1(r_calib_noise_hc)
- Signal-to-noise-ratio(snr)
- Nominal radar antenna gain, h channel(radar_antenna_gain_h)
- Nominal radar antenna gain, v channel(radar_antenna_gain_v)
- Beam Elevation Angle(elevation)
- Radar beam width, vertical channel(radar_beam_width_v)
- Transmit power(r_calib_xmit_power_h)
- Receiver gain for vertical cross-polar channel 2(r_calib_receiver_gain_vx)
- reflectivity(reflectivity)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- Time corresponding to last radial in file(time_coverage_end)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- transmit_pulse_mode(prt_mode)
- data_volume_index_number(volume_number)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- Noise flor for vertical cross-polar channel 2(r_calib_noise_vx)
- Time of the calibration that applies to each ray(r_calib_time)
- Index for the calibration that applies to each ray(r_calib_index)
- Azimuth of Radar Ray(azimuth)
more
|