ENA/RAIN/C1 -  Reprocessed and Corrected: Rename Datastream from RAIN to RAINWB

DATA REPROCESSED and CORRECTED: 



The RAIN ingest has been updated to create for weighing bucket instrument and the data 
were reprocessed.
The new datastream names are enarainwbC1.a1 and enarainwbC1.b1.

The data were archived in September 2016. Please retrieve the reprocessed data for use in 
your analysis.

You may find these data using the ARM Discovery tool at the following link:
http://www.archive.arm.gov/discovery/#v/results/s/finst::rain/fsite::ena/ffac::ena.C1 


ORIGINAL DQR CATEGORY: Transparent (Does not affect quality )

REPROCESSED and CORRECTED DATA ARCHIVED:2016-09

REPROCESS IDENTIFICATION NUMBER: RID 1408

---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------

 Per BCR-02233, the RAIN datastreams were updated to included the type of instrument 
making the measurement.  The RAIN should be reprocessed to RAINWB

• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• Time offset from base_time(time_offset)
• Sensor 1 maximum weight(weight1)
• Total precipitation over one minute sampling period(precip)
• Sensor 2 maximum weight(weight2)
• Sensor 3 maximum weight(weight3)
• Record with error(error_latch)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 2(frequency2)
• Voltage minimum(volt_min)
• time_in_seconds_since_volume_start(time)
• Frequency average, sensor 3(frequency3)
• Sensor status(stat_latch)
• base time in epoch(base_time)
• lon(lon)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• Panel temperature average(ptemp)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Temperature average, sensor 1(temp1)
• Temperature 3 inside the instrument enclosure(temp3)
• Temperature average, sensor 2(temp2)
• -180.0 - +180.0(alt)
• Precipitation intensity(precip_rate)
• Total maintenance count(maintenance_cnt)
• North Latitude(lat)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)

• Voltage minimum(volt_min)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• North Latitude(lat)
• Sensor 3 maximum weight(weight3)
• Sensor 1 maximum weight(weight1)
• Sensor 2 maximum weight(weight2)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• time_in_seconds_since_volume_start(time)
• -180.0 - +180.0(alt)
• Temperature 3 inside the instrument enclosure(temp3)
• Temperature average, sensor 2(temp2)
• Total maintenance count(maintenance_cnt)
• Temperature average, sensor 1(temp1)
• Record with error(error_latch)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 3(frequency3)
• Sensor status(stat_latch)
• base time in epoch(base_time)
• Time offset from base_time(time_offset)
• Total precipitation over one minute sampling period(precip)
• Precipitation intensity(precip_rate)
• Panel temperature average(ptemp)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• lon(lon)