TMP/RAIN/M1 - Reprocessed and Corrected: Rename Datastream from RAIN to RAINWB

DATA REPROCESSED and CORRECTED: 


The RAIN ingest has been updated to create for weighing bucket instrument and the data 
were reprocessed.
The new datastream names are tmprainwbM1.a1 and tmprainwbM1.b1.

The data were archived in September 2016. Please retrieve the reprocessed data for use in 
your analysis.

You may find these data using the ARM Discovery tool at the following link:
http://www.archive.arm.gov/discovery/#v/results/s/finst::rain/fsite::tmp/ffac::tmp.M1
ORIGINAL DQR CATEGORY: Transparent (Does not affect quality )

REPROCESSED and CORRECTED DATA ARCHIVED:2016-09

REPROCESS IDENTIFICATION NUMBER: RID 1410

---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------

Per BCR-02233, the RAIN datastreams were updated to included the type of instrument making 
the measurement.  The MAO RAIN should be reprocessed to RAINWB

• lon(lon)
• Total precipitation over one minute sampling period(precip)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• Record with error(error_latch)
• Voltage minimum(volt_min)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Frequency average, sensor 3(frequency3)
• Total maintenance count(maintenance_cnt)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 2(frequency2)
• Temperature 3 inside the instrument enclosure(temp3)
• Temperature average, sensor 2(temp2)
• Temperature average, sensor 1(temp1)
• Sensor status(stat_latch)
• Panel temperature average(ptemp)
• Time offset from base_time(time_offset)
• Sensor 1 maximum weight(weight1)
• Sensor 2 maximum weight(weight2)
• Sensor 3 maximum weight(weight3)
• North Latitude(lat)
• base time in epoch(base_time)
• Precipitation intensity(precip_rate)
• -180.0 - +180.0(alt)
• time_in_seconds_since_volume_start(time)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)

• time_in_seconds_since_volume_start(time)
• Time offset from base_time(time_offset)
• Sensor 1 maximum weight(weight1)
• Sensor 3 maximum weight(weight3)
• Sensor 2 maximum weight(weight2)
• Record with error(error_latch)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Frequency average, sensor 3(frequency3)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 1(frequency1)
• Sensor status(stat_latch)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• Voltage minimum(volt_min)
• Panel temperature average(ptemp)
• North Latitude(lat)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• -180.0 - +180.0(alt)
• Total precipitation over one minute sampling period(precip)
• Total maintenance count(maintenance_cnt)
• Precipitation intensity(precip_rate)
• Temperature average, sensor 1(temp1)
• Temperature average, sensor 2(temp2)
• Temperature 3 inside the instrument enclosure(temp3)
• base time in epoch(base_time)
• lon(lon)