GAN/RAIN/M1 -  Reprocessed and Corrected: Rename Datastream from RAIN to RAINWB

DATA REPROCESSED and CORRECTED: 


The RAIN ingest has been updated to create for weighing bucket instrument and the data 
were reprocessed.
The new datastream names are ganrainwbM1.00 and ganrainwbM1.b1 .

The data were Archived in July 2016. Please retrieve the reprocessed data for use in your 
analysis.

You may find these data using the ARM Discovery tool at the following link:
http://www.archive.arm.gov/discovery/#v/results/s/finst::rain/fsite::gan/ffac::gan.M1 

ORIGINAL DQR CATEGORY: Transparent (Does not affect quality)

REPROCESSED and CORRECTED DATA ARCHIVED:2016-07

REPROCESS IDENTIFICATION NUMBER: RID 1412

---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------

Per BCR-02233, the RAIN datastreams were updated to included the type of instrument making 
the measurement.  The RAIN should be reprocessed to the RAINWB datastream

• Sensor 1 maximum weight(weight1)
• Voltage minimum(volt_min)
• Sensor 2 maximum weight(weight2)
• Sensor 3 maximum weight(weight3)
• base time in epoch(base_time)
• Time offset from base_time(time_offset)
• lon(lon)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• time_in_seconds_since_volume_start(time)
• Record with error(error_latch)
• Frequency average, sensor 1(frequency1)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Temperature average, sensor 1(temp1)
• Temperature average, sensor 2(temp2)
• Temperature 3 inside the instrument enclosure(temp3)
• Precipitation intensity(precip_rate)
• Total precipitation over one minute sampling period(precip)
• Total maintenance count(maintenance_cnt)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 3(frequency3)
• North Latitude(lat)
• Panel temperature average(ptemp)
• Sensor status(stat_latch)
• -180.0 - +180.0(alt)

• Precipitation intensity(precip_rate)
• Record with error(error_latch)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Sensor 3 maximum weight(weight3)
• Time offset from base_time(time_offset)
• -180.0 - +180.0(alt)
• Total precipitation over one minute sampling period(precip)
• Panel temperature average(ptemp)
• North Latitude(lat)
• Voltage minimum(volt_min)
• Sensor 2 maximum weight(weight2)
• Sensor 1 maximum weight(weight1)
• Total maintenance count(maintenance_cnt)
• Temperature average, sensor 2(temp2)
• Temperature average, sensor 1(temp1)
• Temperature 3 inside the instrument enclosure(temp3)
• base time in epoch(base_time)
• Frequency average, sensor 3(frequency3)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 1(frequency1)
• Sensor status(stat_latch)
• time_in_seconds_since_volume_start(time)
• lon(lon)