TWP/RAIN/C3 - Reprocessed and Corrected: Rename Datastream from RAIN to RAINWB

DATA REPROCESSED and CORRECTED: 


The RAIN ingest has been updated to create for weighing bucket instrument and the data 
were reprocessed.
The new datastream names are twprainwbC3.a1 and twprainwbC3.b1.

The data were archived in September 2016. Please retrieve the reprocessed data for use in 
your analysis.

You may find these data using the ARM Discovery tool at the following link:
http://www.archive.arm.gov/discovery/#v/results/s/finst::rain/fsite::twp/ffac::twp.C3 

ORIGINAL DQR CATEGORY: Transparent (Does not affect quality)

REPROCESSED and CORRECTED DATA ARCHIVED:2016-09

REPROCESS IDENTIFICATION NUMBER: RID 1414

---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------


Per BCR-02233, the RAIN datastreams were updated to included the type of instrument making 
the measurement.  The RAIN should be reprocessed to RAINWB

• -180.0 - +180.0(alt)
• Battery voltage, maximum(batt_volt_max)
• North Latitude(lat)
• Minimum panel temperature(panel_temp_min)
• Battery voltage, minimum(batt_volt_min)
• Datalogger Battery Voltage(batt_volt)
• Time offset from base_time(time_offset)
• time_in_seconds_since_volume_start(time)
• lon(lon)
• base time in epoch(base_time)
• Maximum panel temperature(panel_temp_max)

• (Raw data stream - documentation not supported)

• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• lon(lon)
• base time in epoch(base_time)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Precipitation intensity(precip_rate)
• Sensor 2 maximum weight(weight2)
• Sensor 3 maximum weight(weight3)
• Sensor 1 maximum weight(weight1)
• North Latitude(lat)
• Voltage minimum(volt_min)
• -180.0 - +180.0(alt)
• Total precipitation over one minute sampling period(precip)
• Panel temperature average(ptemp)
• Total maintenance count(maintenance_cnt)
• Time offset from base_time(time_offset)
• Temperature 3 inside the instrument enclosure(temp3)
• Temperature average, sensor 2(temp2)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• Temperature average, sensor 1(temp1)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 3(frequency3)
• Record with error(error_latch)
• time_in_seconds_since_volume_start(time)
• Sensor status(stat_latch)

• -180.0 - +180.0(alt)
• Total precipitation over one minute sampling period(precip)
• North Latitude(lat)
• Time offset from base_time(time_offset)
• Temperature average, sensor 2(temp2)
• Temperature average, sensor 1(temp1)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• Temperature 3 inside the instrument enclosure(temp3)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• base time in epoch(base_time)
• Voltage minimum(volt_min)
• Panel temperature average(ptemp)
• time_in_seconds_since_volume_start(time)
• Precipitation intensity(precip_rate)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• Sensor 3 maximum weight(weight3)
• Total maintenance count(maintenance_cnt)
• lon(lon)
• Sensor status(stat_latch)
• Sensor 2 maximum weight(weight2)
• Sensor 1 maximum weight(weight1)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 3(frequency3)
• Record with error(error_latch)

• (Raw data stream - documentation not supported)