SGP/RAIN/C1 - Reprocessed and Corrected: Rename Datastream from RAIN to RAINWB

DATA REPROCESSED and CORRECTED: 


The RAIN ingest has been updated to create for weighing bucket instrument and the data 
were reprocessed.
The new datastream names are sgprainwbC1.a1 and sgprainwbC1.b1.

The data were archived in September 2016. Please retrieve the reprocessed data for use in 
your analysis.

You may find these data using the ARM Discovery tool at the following link:
http://www.archive.arm.gov/discovery/#v/results/s/finst::rain/fsite::sgp/ffac::sgp.C1 

ORIGINAL DQR CATEGORY: Transparent (Does not affect quality )

REPROCESSED and CORRECTED DATA ARCHIVED:2016-09

REPROCESS IDENTIFICATION NUMBER: RID 1413

---------------------------------------------------
--- ORIGINAL DQR DESCRIPTION ---
---------------------------------------------------

Per BCR-02233, the RAIN datastreams were updated to included the type of instrument making 
the measurement.  The RAIN for this period should be reprocessed to RAINWB.

• Precipitation intensity(precip_rate)
• Temperature average, sensor 1(temp1)
• Temperature average, sensor 2(temp2)
• Temperature 3 inside the instrument enclosure(temp3)
• Record with error(error_latch)
• Total precipitation over one minute sampling period(precip)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• Time offset from base_time(time_offset)
• lon(lon)
• time_in_seconds_since_volume_start(time)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• North Latitude(lat)
• -180.0 - +180.0(alt)
• base time in epoch(base_time)
• Total maintenance count(maintenance_cnt)
• Voltage minimum(volt_min)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Panel temperature average(ptemp)
• Sensor 3 maximum weight(weight3)
• Sensor 2 maximum weight(weight2)
• Sensor 1 maximum weight(weight1)
• Sensor status(stat_latch)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 2(frequency2)
• Frequency average, sensor 3(frequency3)

• lon(lon)
• Temperature 3 inside the instrument enclosure(temp3)
• Temperature average, sensor 2(temp2)
• Temperature average, sensor 1(temp1)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• Millimeters of precipitation accumulated in the gauge since t he last tare.(total_mm)
• Sensor 2 maximum weight(weight2)
• Sensor 3 maximum weight(weight3)
• Voltage minimum(volt_min)
• Sensor 1 maximum weight(weight1)
• -180.0 - +180.0(alt)
• Total maintenance count(maintenance_cnt)
• Time offset from base_time(time_offset)
• North Latitude(lat)
• Panel temperature average(ptemp)
• Precipitation intensity(precip_rate)
• time_in_seconds_since_volume_start(time)
• Weight of accumulated precipitation in the gauge since the la st tare(total_weight)
• Record with error(error_latch)
• Total precipitation over one minute sampling period(precip)
• base time in epoch(base_time)
• The latch counter counts number of measurement scans within one minute.(scans_per_min)
• Frequency average, sensor 1(frequency1)
• Frequency average, sensor 3(frequency3)
• Frequency average, sensor 2(frequency2)
• Sensor status(stat_latch)

• (Raw data stream - documentation not supported)

• North Latitude(lat)
• Minimum panel temperature(panel_temp_min)
• Time offset from base_time(time_offset)
• base time in epoch(base_time)
• Maximum panel temperature(panel_temp_max)
• Battery voltage, maximum(batt_volt_max)
• Datalogger Battery Voltage(batt_volt)
• Battery voltage, minimum(batt_volt_min)
• lon(lon)
• time_in_seconds_since_volume_start(time)
• -180.0 - +180.0(alt)

• (Raw data stream - documentation not supported)