ASI/ACSM/M1 - Noisy data from low inlet pressure

The inlet pressure is low as the result of a clogged critical orifice.  Data are corrected 
for inlet pressure but the signal is low because of very light aerosol loading and are 
noisy.

Can be used if necessary, but noise should be noted.

• Mass concentration of total organics, ambient aerosol in air(total_organics)
• Mass concentration of ammonium, ambient aerosol in air(ammonium)
• Mass concentration of chloride, ambient aerosol in air.(chloride)
• Organic mass spectral error matrix(org_mx_err)
• Mass concentration of sulfate, ambient aerosol in air.(sulfate)
• Organic mass spectral matrix(org_mx)
• Mass concentration of nitrate, ambient aerosol in air(nitrate)
• Mass to charge ratios of ion fragments(amus)

• Mass concentration of nitrate, ambient aerosol in air(nitrate)
• Mass concentration of ammonium, ambient aerosol in air(ammonium)
• Mass concentration of total organics, ambient aerosol in air(total_organics)
• Inlet closed(inlet_closed)
• flow rate measured by the mass flow controller(flow_rate)
• Mass concentration of chloride, ambient aerosol in air.(chloride)
• Vaporizer(vaporizer)
• Mass concentration of sulfate, ambient aerosol in air.(sulfate)
• Emission current(emission_current)
• Inlet open(inlet_open)

• (Raw data stream - documentation not supported)