Measurements: | oliwsacrzppiM1.a1: - radar_measured_transmit_power(radar_measured_transmit_power)
- ray_target_fixed_angle(fixed_angle)
- Index of first ray in sweep, 0-based(sweep_start_ray_index)
- Differential reflectivity(differential_reflectivity)
- Prt between group pulses(group_intra_pulse_prt)
- Doppler spectrum width (second moment of the doppler spectrum)(spectral_width)
- Radar constant, vertical cross-polar channel 2(r_calib_radar_constant_v)
- Azimuth of Radar Ray(azimuth)
- Index for the calibration that applies to each ray(r_calib_index)
- Radar constant, horizontal copolar channel 1(r_calib_radar_constant_h)
- Cross-polar propagation phase shift(cross_polar_differential_phase_h)
- Linear depolarization ratio, vertical channel(linear_depolarization_ratio_v)
- calibrated_radar_dielectric_constant_in_use(r_calib_dielectric_constant)
- radar_calibration_two_way_radome_loss_h_channel(r_calib_two_way_radome_loss_h)
- type_of_instrument(instrument_type)
- antenna_is_in_transition_between_sweeps(antenna_transition)
- pulse_repetition_frequency(prt)
- Copol to cross-polar correlation coefficient (also known as rhoxv)(co_to_crosspol_correlation_coeff_v)
- Radial mean Doppler velocity from horizontal channel, positive for motion away
from the instrument, uncorrected(uncorrected_mean_doppler_velocity_h) - Radial mean Doppler velocity from vertical channel, positive for motion away
from the instrument, uncorrected(uncorrected_mean_doppler_velocity_v) - platform_type(platform_type)
- Time index of last ray in sweep, 0-based(sweep_end_ray_index)
- Copolar correlation coefficient (also known as rhohv)(copol_correlation_coeff)
- Sweep number(sweep)
- Polarization mode(polarization_mode)
- reflectivity(reflectivity)
- Copol to cross-polar correlation coefficient (also known as rhocx)(co_to_crosspol_correlation_coeff)
- calibrated_radar_rx_path_loss_v_channel(r_calib_rx_path_loss_v)
- half_power_radar_beam_width_h_channel(radar_beam_width_h)
- calibrated_radar_tx_path_loss_v_channel(r_calib_tx_path_loss_v)
- transmit_pulse_mode(prt_mode)
- Number of samples used to compute moments(n_samples)
- Received copolar power, v channel, with thresholding(unthresholded_power_co_polar_v)
- Pulse width(pulse_width)
- calibrated_radar_finite_bandwidth_loss_h_channel(r_calib_finite_bandwidth_loss_h)
- Signal-to-noise ratio, vertical channel(signal_to_noise_ratio_co_polar_v)
- calibrated_radar_probert_jones_correction_factor(r_calib_probert_jones_correction)
- Measured sky noise, vertical channel(sky_noise_v)
- Radar beam width, vertical channel(radar_beam_width_v)
- radiation_frequency(frequency)
- Received cross polar power, v channel, without thresholding(unthresholded_power_cross_polar_v)
- calibrated_radar_rx_path_loss_h_channel(r_calib_rx_path_loss_h)
- calibrated_radar_receiver_gain_v_cross_polar_channel(r_calib_receiver_gain_vc)
- Time corresponding to last radial in file(time_coverage_end)
- Copol to cross-polar correlation coefficient (also known as rhoxh)(co_to_crosspol_correlation_coeff_h)
- Measured sky noise, horizontal channel(sky_noise_h)
- calibrated_radar_tx_path_loss_h_channel(r_calib_tx_path_loss_h)
- Received cross polar power, h channel, without thresholding(unthresholded_power_cross_polar_h)
- radar_calibrated_finite_bandwidth_loss_v_channel(r_calib_finite_bandwidth_loss_v)
- Cross-polar propagation phase shift(cross_polar_differential_phase)
- Cross-polar propagation phase shift(cross_polar_differential_phase_v)
- Scan rate, positive for clockwise or increasing elevation(scan_rate)
- calibrated_radar_receiver_gain_v_co_polar_channel(r_calib_receiver_gain_hc)
- Linear depolarization ratio, horizontal channel(linear_depolarization_ratio_h)
- Sweep number, zero-based count(sweep_number)
- Signal-to-noise-ratio(snr)
- Differential propagation phase shift(differential_phase)
- Signal-to-noise ratio, Cross-pol for horizontal channel(signal_to_noise_ratio_cross_polar_h)
- data_volume_start_time_utc(time_coverage_start)
- Unambiguous range(unambiguous_range)
- Received copolar power, h channel, without thresholding.(unthresholded_power_co_polar_h)
- Signal-to-noise ratio, Cross-pol for vertical channel(signal_to_noise_ratio_cross_polar_v)
- Distance to the center of the corresponding range bin(range)
- Scan mode for sweep(sweep_mode)
- Mean doppler velocity(mean_doppler_velocity)
- Signal-to-noise ratio, horizontal channel(signal_to_noise_ratio_co_polar_h)
- Unambiguous Doppler velocity(nyquist_velocity)
- Beam Elevation Angle(elevation)
- data_volume_index_number(volume_number)
more
|