Subject: | NSA/IRT/MWR/C1 - Data Missing - Data System Upgrades |
DataStreams: | nsamwrtipC1.b1, nsairtC1.b1, nsamwrtipC1.a1, nsamwrC1.00, nsamwrlosC1.00, nsairtC1.00, nsairt200msC1.a1, nsamwrlosC1.b1, nsamwrtipC1.00, nsamwrlosC1.a1
|
Description: | Site data systems were being upgraded during this period. |
Suggestions: | |
Measurements: | nsamwrlosC1.a1: - 31.4 GHz sky+noise injection signal(skyn31)
- North Latitude(lat)
- Which LOS configuration(losn)
- Ambient temperature(tkair)
- 23.8 GHz sky plus noise injection signal(skyn23)
- Averaged total liquid water along LOS path(liq)
- IR Brightness Temperature(ir_temp)
- -180.0 - +180.0(alt)
- 23.8 GHz noise injection brightness temperature(unoise23)
- Mean 23.8 GHz sky brightness temperature(tbsky23)
- 23.8 GHz Blackbody signal(bb23)
- 31.4 GHz noise injection brightness temperature(unoise31)
- 23.8 GHz blackbody+noise injection signal(bbn23)
- Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
- Actual elevation angle(actel)
- Mean 31.4 GHz sky brightness temperature(tbsky31)
- (tair)
- base time in epoch(base_time)
- (tknd)
- 31.4 GHz blackbody(bb31)
- 23.8 GHz sky signal(sky23)
- 31.4 GHz blac2body+noise injection signal(bbn31)
- Total water vapor along LOS path(vap)
- Mixer kinetic (physical) temperature(tkxc)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
- Blackbody kinetic temperature(tkbb)
- Actual Azimuth(actaz)
- Time offset from base_time(time_offset)
- Temperature correction coefficient at 23.8 GHz(tc23)
- Temperature correction coefficient at 31.4 GHz(tc31)
- lon(lon)
- 31.4 GHz sky signal(sky31)
- Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
- Sky Infra-Red Temperature(sky_ir_temp)
- Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
more
nsamwrtipC1.a1: - Temperature correction coefficient at 23.8 GHz(tc23)
- Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
- Noise injection temp at 23.8 GHz derived from this tip(tnd23I)
- Blackbody kinetic temperature(tkbb)
- base time in epoch(base_time)
- time_in_seconds_since_volume_start(time)
- North Latitude(lat)
- Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
- -180.0 - +180.0(alt)
- Total water vapor along zenith path using tip-derived brightness temperatures(vaptip)
- Ambient temperature(tkair)
- 23.8 GHz sky brightness temperature derived from tip curve(tbsky23tip)
- 31.4 GHz sky brightness temperature derived from tip curve(tbsky31tip)
- Actual Azimuth(actaz)
- Mixer kinetic (physical) temperature(tkxc)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- 31.4 GHz blackbody(bb31)
- Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
- (tknd)
- Noise injection temp at 31.4 GHz derived from this tip(tnd31I)
- lon(lon)
- Correlation coefficients for tip curve at 31.4 GHz(r31)
- 31.4 GHz blac2body+noise injection signal(bbn31)
- 23.8 GHz Blackbody signal(bb23)
- Time offset from base_time(time_offset)
- 23.8 GHz goodness-of-fit coefficient(r23)
- Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
- 23.8 GHz blackbody+noise injection signal(bbn23)
- Actual elevation angle(actel)
- Total liquid water along zenith path using tip-derived brightness temperatures(liqtip)
- 31.4 GHz sky signal(tipsky31)
- 23.8 GHz sky brightness temperature derived from tip curve(tbskytip23)
- 23.8 GHz sky signal(tipsky23)
- Tip angles used for each tip curve(tip_angles)
- Temperature correction coefficient at 31.4 GHz(tc31)
- 31.8 GHz sky brightness temperature derived from tip curve(tbskytip31)
more
nsamwrtipC1.00: - (Raw data stream - documentation not supported)
more
nsamwrlosC1.00: - (Raw data stream - documentation not supported)
more
nsamwrtipC1.b1: - Mixer kinetic (physical) temperature(tkxc)
- 31.4 GHz calibration curve slope(gain31)
- 31.4 GHz blackbody(bb31)
- 31.4 GHz noise diode calib adjusted to tknd_nom and low_pass filtered(expave31)
- 31.4 GHz noise diode calib (injection temp) at Tkxc(ndiode31)
- 31.4 GHz sky signal+noise injection signal(tipskynd31)
- 23.8 GHz noise diode calib adjusted to tknd_nom and low_pass filtered(expave23)
- 23.8 GHz sky signal+noise injection signal(tipskynd23)
- 23.8 GHz noise diode calib (injection temp) at Tkxc(ndiode23)
- Actual Azimuth(actaz)
- Actual elevation angle(actel)
- (tair)
- base time in epoch(base_time)
- Airmass value(airm)
- 31.4 GHz zenith brightness temperature(tbzenith31)
- 23.8 GHz goodness-of-fit coefficient(r23)
- 23.8 GHz Blackbody signal(bb23)
- 23.8 GHz calibration curve slope(gain23)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- 23.8 GHz calibration curve offset(tbzenith23)
- (tknd)
- Correlation coefficients for tip curve at 31.4 GHz(r31)
- Blackbody temperature 1(tkbb1)
- Blackbody temperature 2(tkbb2)
- lon(lon)
- 31.4 GHz blac2body+noise injection signal(bbn31)
- Tip configuration number(tipn)
- 23.8 GHz sky signal(tipsky23)
- 23.8 GHz blackbody signal(tipbb23)
- Time offset from base_time(time_offset)
- IR Brightness Temperature(ir_temp)
- 31.4 GHz sky signal(tipsky31)
- 31.4 GHz blackbody signal(tipbb31)
- North Latitude(lat)
- -180.0 - +180.0(alt)
- 23.8 GHz blackbody+noise injection signal(bbn23)
more
nsamwrC1.00: - (Raw data stream - documentation not supported)
more
nsairt200msC1.a1: - North Latitude(lat)
- base time in epoch(base_time)
- -180.0 - +180.0(alt)
- Sky Infra-Red Temperature(sky_ir_temp)
- Time offset from base_time(time_offset)
- Internal Reference Infra Red Temperature(ref_ir_temp)
- time_in_seconds_since_volume_start(time)
- lon(lon)
more
nsamwrlosC1.b1: - Averaged total liquid water along LOS path(liq)
- North Latitude(lat)
- Quality check results on field: Total liquid water along LOS path(qc_liq)
- -180.0 - +180.0(alt)
- Quality check results on field: 31.4 GHz sky brightness temperature(qc_tbsky31)
- Quality check results on field: 31.4 GHz blackbody+noise injection signal(qc_bbn31)
- Quality check results on field: Mixer kinetic (physical) temperature(qc_tkxc)
- Quality check results on field: 23.8 GHz sky signal(qc_sky23)
- Temperature correction coefficient at 31.4 GHz(tc31)
- Quality check results on field: 31.4 GHz Blackbody signal(qc_bb31)
- Temperature correction coefficient at 23.8 GHz(tc23)
- IR Brightness Temperature(ir_temp)
- Blackbody kinetic temperature(tkbb)
- Actual Azimuth(actaz)
- Quality check results on field: 23.8 GHz Blackbody signal(qc_bb23)
- Noise injection temp at 23.8 GHz adjusted to tkbb(tnd23)
- Quality check results on field: Noise diode mount temperature(qc_tknd)
- 31.4 GHz sky signal(sky31)
- 23.8 GHz blackbody+noise injection signal(bbn23)
- 23.8 GHz sky signal(sky23)
- Sky Infra-Red Temperature(sky_ir_temp)
- Quality check results on field: 23.8 GHz sky brightness temperature(qc_tbsky23)
- 31.4 GHz blac2body+noise injection signal(bbn31)
- Quality check results on field: 23.8 GHz blackbody+noise injection signal(qc_bbn23)
- base time in epoch(base_time)
- Noise injection temp at 31.4 GHz adjusted to tkbb(tnd31)
- Time offset from base_time(time_offset)
- (tknd)
- Total water vapor along LOS path(vap)
- Mean 23.8 GHz sky brightness temperature(tbsky23)
- Noise injection temp at nominal temperature at 31.4 GHz(tnd_nom31)
- Water on Teflon window (1=WET, 0=DRY)(wet_window)
- lon(lon)
- 23.8 GHz Blackbody signal(bb23)
- Quality check results on field: Total water vapor along LOS path(qc_vap)
- Quality check results on field: 31.4 GHz sky signal(qc_sky31)
- 31.4 GHz blackbody(bb31)
- Mixer kinetic (physical) temperature(tkxc)
- Quality check results on field: Blackbody kinetic temperature(qc_tkbb)
- Noise injection temp at nominal temperature at 23.8 GHz(tnd_nom23)
- Mean 31.4 GHz sky brightness temperature(tbsky31)
- Actual elevation angle(actel)
- Ambient temperature(tkair)
- time_in_seconds_since_volume_start(time)
- Results of quality checks on sample time(qc_time)
- Quality check results on field: Ambient temperature(qc_tkair)
more
nsairtC1.00: - (Raw data stream - documentation not supported)
more
nsairtC1.b1: - Quality check results on field: Sky Infra-Red Temperature, Maxima(qc_sky_ir_temp_max)
- North Latitude(lat)
- -180.0 - +180.0(alt)
- Sky infrared temperature, standard deviation(sky_ir_temp_std)
- Quality check results on field: Sky Infra-Red Temperature, Minima(qc_sky_ir_temp_min)
- Sky Infra-Red Temperature(sky_ir_temp)
- Quality check results on field: Internal reference infrared temperature(qc_ref_ir_temp)
- Time offset from base_time(time_offset)
- Internal Reference Infra Red Temperature(ref_ir_temp)
- Number of averaged samples(samples_in_average)
- time_in_seconds_since_volume_start(time)
- lon(lon)
- base time in epoch(base_time)
- Sky Infra Red Temperature Maxima(sky_ir_temp_max)
- Sky Infra-Red Temperature Minima(sky_ir_temp_min)
- Quality check results on field: Sky/Cloud Infrared Temperature(qc_sky_ir_temp)
more
|