Subject: | NSA/ECOR/TSI/C1/E10 - Data Missing |
DataStreams: | nsatsiC1.00, nsatsimovieC1.a1, nsatsiskyimageC1.a1, nsatsicldmaskC1.a1, nsaecorE10.00, nsa30ecorE10.b1, nsatsiskycoverC1.b1
|
Description: | Site data systems were being upgraded during this time. |
Suggestions: | |
Measurements: | nsatsiskyimageC1.a1: - null(JPEG data stream - documentation not yet available)
more
nsatsimovieC1.a1: - (MPEG data stream - documentation not yet available)
more
nsaecorE10.00: - (Raw data stream - documentation not supported)
more
nsa30ecorE10.b1: - number of samples with IRGA optical path blocked flag(n_bad_irga_light)
- rotated variance w(var_rot_w)
- Rotated variance u(var_rot_u)
- kurtosis of variable q(kurt_q)
- variance of v(var_rot_v)
- Vector averaged wind speed(wind_spd)
- kurtosis of variable u(kurt_u)
- Kurtosis of variable mean_t(kurt_t)
- kurtosis of variable w(kurt_w)
- kurtosis of variable v(kurt_v)
- Mean value of "spike" u samples(mean_spk_u)
- CO2 flux(fc)
- Mean value of "spike" t samples(mean_spk_t)
- mean value of \spike\ w samples(mean_spk_w)
- Mean value of "spike" v samples(mean_spk_v)
- Time offset from base_time(time_offset)
- Average temperature (IGRA internal sensor)(temp_irga)
- mean value of out of range values and spikes of c -9999 if no spikes(mean_spk_c)
- Covariance qc(cvar_qc)
- Quality check results on field: Mean v wind component(qc_mean_v)
- Quality check results on field: Mean w (vertical) wind component(qc_mean_w)
- mean value of out of range values and spikes of q -9999 if no spikes(mean_spk_q)
- Quality check results on field: Mean t temperature (sonic anemometer)(qc_mean_t)
- Quality check results on field: Mean u wind component(qc_mean_u)
- Quality check results on field: Mean water vapor density(qc_mean_q)
- Standard deviation of wind elevation angle(std_elev)
- Covariance tc(cvar_tc)
- number of samples with bad sonic status flag(n_bad_son_ic)
- covariance of tq(cvar_tq)
- Quality check results on field: Mean CO2 density(qc_mean_c)
- Quality check results on field: Standard deviation of wind direction(qc_std_wind_dir)
- Quality check results on field: Moist air density(qc_rho)
- Quality check results on field: Latent heat of vaporization(qc_lv)
- Covariance vw(cvar_vw)
- Covariance vt(cvar_vt)
- Covariance wc(cvar_wc)
- Quality check results on field: Average temperature (IGRA internal sensor)(qc_temp_irga)
- Number of samples with bad sonic status flag(n_bad_sonic)
- Covariance vq(cvar_vq)
- Quality check results on field: Variance of variable mean_v(qc_var_v)
- Quality check results on field: Variance of variable mean_w(qc_var_w)
- Quality check results on field: Variance of variable mean_t(qc_var_t)
- Quality check results on field: Variance of variable mean_u(qc_var_u)
- covariance uw(cvar_uw)
- Covariance uv(cvar_uv)
- Quality check results on field: Mixing ratio(qc_mr)
- covariance ut(cvar_ut)
- covariance vc(cvar_vc)
- Quality check results on field: Vector averaged wind direction(qc_wind_dir)
- Quality check results on field: Variance of variable mean_q(qc_var_q)
- friction velocity(ustar)
- Quality check results on field: Momentum flux (dynamic)(qc_k)
- Quality check results on field: Sensible heat flux at surface, upward positive(qc_h)
- Covariance uc(cvar_uc)
- covariance uq(cvar_uq)
- Quality check results on field: Variance of variable mean_c(qc_var_c)
- momentum flux (dynamic)(k)
- Rotated covariance vc(cvar_rot_vc)
- base time in epoch(base_time)
- 0=real or 1=dummy value of cp(real_cp)
- vertical (elevation) wind angle(elev)
- specific heat of moist air(cp)
- rotated covariance vq(cvar_rot_vq)
- Rotated covariance vt(cvar_rot_vt)
- rotated covariance vw(cvar_rot_vw)
- Standard deviation of wind direction(std_wind_dir)
- Rotated covariance wc(cvar_rot_wc)
- kurtosis of variable c(kurt_c)
- rotated covariance wq(cvar_rot_wq)
- rotated covariance wt(cvar_rot_wt)
- Quality check results on field: Latent heat flux(qc_lv_e)
- covariance wt(cvar_wt)
- covariance wq(cvar_wq)
- corrected sensible heat flux(h)
- vector averaged wind direction(wind_dir)
- latent heat flux(lv_e)
- Water vapor mixing ratio observed by the Raman lidar(mr)
- number of t samples removed due to spikes(n_spk_t)
- number of v samples removed due to spikes(n_spk_v)
- Number of u samples removed due to spikes(n_spk_u)
- number of w samples removed due to spikes(n_spk_w)
- average voltage of IRGA cooler(mean_cooler)
- -180.0 - +180.0(alt)
- Quality check results on field: Vertical (elevation) wind angle(qc_elev)
- Number of q samples removed due to spikes(n_spk_q)
- rotated covariance uc(cvar_rot_uc)
- North Latitude(lat)
- number of samples with \IRGA hardware problem\ flag(n_bad_irga)
- Status of source for latent heat of vaporization(real_lv)
- Status of source for mixing ratio(real_mr)
- Rotated covariance uq(cvar_rot_uq)
- Rotated covariance ut(cvar_rot_ut)
- rotated covariance uv(cvar_rot_uv)
- rotated covariance uw(cvar_rot_uw)
- skewness of variable q(skew_q)
- number of valid q samples(n_good_q)
- number of valid t samples(n_good_t)
- Number of valid u samples(n_good_u)
- 0=real or 1=dummy value of rho(real_rho)
- Atmospheric pressure(atm_pres)
- number of valid v samples(n_good_v)
- Number of valid w samples(n_good_w)
- skewness of variable u(skew_u)
- skewness of variable t(skew_t)
- Quality check results on field: CO2 flux(qc_fc)
- skewness of variable w(skew_w)
- Skewness of variable mean_v(skew_v)
- rotation to zero v(phi)
- Number of c samples removed due to spikes(n_spk_c)
- skewness of variable c(skew_c)
- lon(lon)
- number of bad or out of range v samples(n_bad_v)
- number of bad or out of range w samples(n_bad_w)
- Number of bad or out of range t samples(n_bad_t)
- number of bad or out of range u samples(n_bad_u)
- Quality check results on field: Vector averaged wind speed(qc_wind_spd)
- Number of bad or out of range c samples(n_bad_c)
- number of valid c samples(n_good_c)
- Quality check results on field: Average atmospheric pressure (IGRA internal
sensor)(qc_atm_pres) - Quality check results on field: Friction velocity(qc_ustar)
- Number of bad or out of range q samples(n_bad_q)
- mean co2 concentration (c)(mean_c)
- variance of t(var_t)
- variance of q(var_q)
- variance of variable w(var_w)
- variance of variable u(var_u)
- Quality check results on field: Standard deviation of wind elevation angle(qc_std_elev)
- Variance of variable mean_v(var_v)
- moist air density(rho)
- variance of c(var_c)
- Quality check results on field: Number of valid w samples(qc_n_good_w)
- Quality check results on field: Number of valid v samples(qc_n_good_v)
- Quality check results on field: Number of valid u samples(qc_n_good_u)
- Quality check results on field: Number of valid t samples(qc_n_good_t)
- rotated mean w(mean_rot_w)
- rotated mean v(mean_rot_v)
- Quality check results on field: Number of valid q samples(qc_n_good_q)
- Rotated mean u(mean_rot_u)
- time_in_seconds_since_volume_start(time)
- Quality check results on field: Number of valid c samples(qc_n_good_c)
- mean sonic temperature (t), i.e. virtual temperature(mean_t)
- mean water vapor concentration (q)(mean_q)
- Vertical wind velocity (w)(mean_w)
- Down-boom wind velocity (u)(mean_u)
- Cross-boom wind velocity (v)(mean_v)
- Latent heat of vaporization(lv)
- Quality check results on field: Specific heat of moist air(qc_cp)
more
nsatsiskycoverC1.b1: - Percent opaque cloud(percent_opaque)
- Pixel count: number opaque in horizon area(region_horizon_count_opaque)
- Pixel count: number total thin(count_thin)
- Pixel count: number opaque in zenith circle(region_zenith_count_opaque)
- Pixel count: number total opaque(count_opaque)
- Pixel count: number total in zenith circle(region.zenith.count)
- Pixel count: number total in sun circle(region.sun.count)
- Pixel count: number thin in sun circle(region.sun.count.thin)
- Pixel count: number total in sun circle(region_sun_count)
- Pixel count: number below horizon in image(count.sub.horz)
- Quality check results on field: Pixel count: number thin in zenith circle(qc_region_zenith_count_thin)
- Quality check results on field: Pixel count: number thin in horizon area(qc_region_horizon_count_thin)
- Quality check results on field: Relative 'strength' of direct sun(qc_sun_strength)
- Solar azimuth angle(solar.azimuth)
- Pixel count: number total between horizon and processed circle(count.sub.proczen)
- Percentage thin cloud(percent.thin)
- Pixel count: number total in zenith circle(region_zenith_count)
- Quality check results on field: Pixel count: number thin in sun circle(qc_region_sun_count_thin)
- Pixel count: number opaque in sun circle(region.sun.count.opaque)
- Pixel count: number thin in horizon area(region.horizon.count.thin)
- Relative 'strength' of direct sun(sun_strength)
- Pixel count: camera and sun strip mask(count.mask)
- Pixel count: number in camera and sun strip mask(count_mask)
- Quality check results on field: Pixel count: number total in horizon area(qc_region_horizon_count)
- Quality check results on field: Pixel count: number in camera and sun strip mask(qc_count_mask)
- Quality check results on field: Percent thin cloud(qc_percent_thin)
- Quality check results on field: Pixel count: number total in zenith circle(qc_region_zenith_count)
- Quality check results on field: Pixel count: number opaque in sun circle(qc_region_sun_count_opaque)
- Pixel count: number total in horizon area(region.horizon.count)
- Percent thin cloud(percent_thin)
- Relative \'strength\' of direct sun(sun.strength)
- Pixel count: number total in processed circle(count.sky)
- -180.0 - +180.0(alt)
- Pixel count: number thin in zenith circle(region.zenith.count.thin)
- North Latitude(lat)
- Quality check results on field: Pixel count: number total in processed circle(qc_count_sky)
- Results of quality checks on sample time(qc_time)
- Pixel count: number thin in zenith circle(region_zenith_count_thin)
- Solar azimuth angle relative to north(solar_azimuth)
- Quality check results on field: Sunshine meter(qc_sunny)
- Pixel count: number opaque in zenith circle(region.zenith.count.opaque)
- Sunshine meter(sunny)
- Pixel count: number opaque in sun circle(region_sun_count_opaque)
- Quality check results on field: Pixel count: number total in sun circle(qc_region_sun_count)
- Time offset from base_time(time_offset)
- lon(lon)
- Pixel count: number total between horizon and processed circle(count_sub_proczen)
- Pixel count: number total indeterminant(count.unknown)
- Pixel count: number thin in horizon area(region_horizon_count_thin)
- Percent opaque cloud(percent.opaque)
- Pixel count: number total in processed circle(count_sky)
- Pixel count: number total thin(count.thin)
- Quality check results on field: Pixel count: number opaque in horizon area(qc_region_horizon_count_opaque)
- Quality check results on field: Pixel count: number total thin(qc_count_thin)
- Quality check results on field: Percent opaque cloud(qc_percent_opaque)
- Sun altitude above horizon(solar.altitude)
- Pixel count: number total opaque(count.opaque)
- Pixel count: number in box, outside mirror area(count_box)
- Quality check results on field: Pixel count: number total between horizon and
processed circle(qc_count_sub_proczen) - Pixel count: number total indeterminate(count_unknown)
- Quality check results on field: Pixel count: number in box, outside mirror area(qc_count_box)
- Quality check results on field: Sun altitude above horizon(qc_solar_altitude)
- Sun altitude above horizon(solar_altitude)
- Pixel count: number opaque in horizon area(region.horizon.count.opaque)
- Quality check results on field: Pixel count: number below horizon in image(qc_count_sub_horz)
- Pixel count: number thin in sun circle(region_sun_count_thin)
- Pixel count: box, outside mirror area(count.box)
- base time in epoch(base_time)
- Quality check results on field: Solar azimuth angle relative to north(qc_solar_azimuth)
- time_in_seconds_since_volume_start(time)
- Pixel count: number total in horizon area(region_horizon_count)
- Quality check results on field: Pixel count: number opaque in zenith circle(qc_region_zenith_count_opaque)
- Quality check results on field: Pixel count: number total indeterminate(qc_count_unknown)
- Pixel count: number below horizon in image(count_sub_horz)
- Quality check results on field: Pixel count: number total opaque(qc_count_opaque)
more
nsatsicldmaskC1.a1: - PNG data stream - documentation not supported(png)
more
nsatsiC1.00: - (Raw data stream - documentation not supported)
more
|