AWR/RWP/M1 - Data collection

Instrument computer was put on stand by since it had reached 90% storage capacity. 
Therefore, data is missing/was not recorded during the DQPR period.

• (Raw data stream - documentation not supported)

• Quality check results on field: The standard deviations for vertical_velocity.(qc_vertical_velocity_std)
• Vertical velocity.(vertical_velocity)
• Number of phase code bits in a pulse.(num_code_bits)
• Quality check results on field: Pulse width.(qc_pulse_width)
• Quality check results on field: Number of phase code bits in a pulse.(qc_num_code_bits)
• Time offset from base_time(time_offset)
• -180.0 - +180.0(alt)
• Number of time domain integrations.(num_time_domain)
• Pulse width(pulse_width)
• Mode number(mode_number)
• Quality check results on field: Vertical velocity.(qc_vertical_velocity)
• Number of reporting levels for this mode.(num_levels)
• MET data averaging interval.(averaging_interval)
• Transmit power level setting.(transmit_power_level_setting)
• The standard deviations for vertical_velocity.(vertical_velocity_std)
• Flag value indicating if the mode was missing from the raw data file.(missing_mode)
• Quality check results on field: Fast Fourier Transform length.(qc_fourier_transform_length)
• Number of range gates sampled.(num_range_gates)
• Period between two pulses(interpulse_period)
• Quality check results on field: Interpulse period of this mode.(qc_interpulse_period)
• lon(lon)
• Quality check results on field: MET data averaging interval.(qc_averaging_interval)
• base time in epoch(base_time)
• Fast Fourier Transform length.(fourier_transform_length)
• heights of the boundaries of each layer(level)
• Quality check results on field: Number of time domain integrations.(qc_num_time_domain)
• Number of frequency domain integrations.(num_frequency_domain)
• Quality check results on field: Number of frequency domain integrations.(qc_num_frequency_domain)
• North Latitude(lat)
• Name of wind profiler operational mode.(mode_name)
• Height(height)
• Mode index(mode)
• Quality check results on field: The altitude AGL of the center of the range
  gate.(qc_height)
• Quality check results on field: Transmit power level setting.(qc_transmit_power_level_setting)
• time_in_seconds_since_volume_start(time)

• The power of the atmospheric signal associated with radial_velocity.(radial_velocity_power)
• Direction from which the wind blows, with respect to Geographic or Magnetic
  north(wind_direction)
• Quality check results on field: The signal to noise ratio of the atmospheric
  signal associated with radial_velocity.(qc_radial_velocity_snr)
• Transmit power level setting.(transmit_power_level_setting)
• Quality check results on field: Number of phase code bits in a pulse.(qc_num_code_bits)
• Mode number(mode_number)
• Fast Fourier Transform length.(fourier_transform_length)
• Number of range gates sampled.(num_range_gates)
• base time in epoch(base_time)
• Quality check results on field: Zonal wind speed.(qc_wind_u)
• Quality check results on field: Meridional wind speed.(qc_wind_v)
• Quality check results on field: Vertical wind speed.(qc_wind_w)
• time_in_seconds_since_volume_start(time)
• Quality check results on field: The standard deviations for wind_speed.(qc_wind_speed_std)
• Quality check results on field: Quality control interval.(qc_wind_quality_interval)
• Quality check results on field: Radial velocity(qc_radial_velocity)
• Flag value indicating if the mode was missing from the raw data file.(missing_mode)
• lon(lon)
• Number of frequency domain integrations.(num_frequency_domain)
• 10m wind u-component(wind_u)
• Number of reporting levels for this mode.(num_levels)
• Quality check results on field: The horizontal direction from which the wind is
  blowing (degrees clockwise from true north).(qc_wind_direction)
• Vertical wind speed.(wind_w)
• Meridional wind speed.(wind_v)
• Standard Deviation of 1s wind speed at the ground station in one minute,
  standard deviation(wind_speed_std)
• Quality check results on field: Wind speed(qc_wind_speed)
• Mode index(mode)
• Quality check results on field: The number of measurements averaged in
  radial_velocity.(qc_radial_velocity_navg)
• The number of measurements averaged in radial_velocity.(radial_velocity_navg)
• Quality check results on field: The spectral width of the atmospheric signal
  associated with radial_velocity.(qc_radial_velocity_width)
• Results of quality checks on sample time(qc_time)
• Number of phase code bits in a pulse.(num_code_bits)
• Quality check results on field: A decimal value between 0 and 1 indicating the
  quality of the winds at the given level.(qc_wind_quality)
• Quality control interval.(wind_quality_interval)
• Height(height)
• Beam Number(beam)
• Radial velocity(radial_velocity)
• Time offset from base_time(time_offset)
• The signal to noise ratio of the atmospheric signal associated with
  radial_velocity.(radial_velocity_snr)
• Quality check results on field: The altitude AGL of the center of the range
  gate.(qc_height)
• MET data averaging interval.(averaging_interval)
• Quality check results on field: Pulse width.(qc_pulse_width)
• Angle from vertical.(zenith_angle)
• -180.0 - +180.0(alt)
• Pulse width(pulse_width)
• Period between two pulses(interpulse_period)
• Azimuth of Radar Ray(azimuth)
• The spectral width of the atmospheric signal associated with radial_velocity.(radial_velocity_width)
• Quality check results on field: The power of the atmospheric signal associated
  with radial_velocity.(qc_radial_velocity_power)
• Wind speed 5m AGL at the ground station(wind_speed)
• Number of time domain integrations.(num_time_domain)
• Name of wind profiler operational mode.(mode_name)
• Quality check results on field: Number of time domain integrations.(qc_num_time_domain)
• Quality check results on field: Interpulse period of this mode.(qc_interpulse_period)
• Quality check results on field: Fast Fourier Transform length.(qc_fourier_transform_length)
• heights of the boundaries of each layer(level)
• North Latitude(lat)
• Quality check results on field: MET data averaging interval.(qc_averaging_interval)
• Quality check results on field: Pointing azimuth, from true north.(qc_azimuth)
• Quality check results on field: The standard deviations for wind_w.(qc_wind_w_std)
• A decimal value between 0 and 1 indicating the quality of the winds at the given
  level.(wind_quality)
• Number of azimuth beam positions.(num_azimuth_beams)
• Quality check results on field: Transmit power level setting.(qc_transmit_power_level_setting)
• The standard deviations for wind_w.(wind_w_std)
• Quality check results on field: Angle from vertical.(qc_zenith_angle)
• Quality check results on field: Number of frequency domain integrations.(qc_num_frequency_domain)

• Interval between gates(gate_interval)
• Pulse width(pulse_width)
• Number of FFT points in measurement(num_fft_points)
• Time offset from base_time(time_offset)
• Spectra(spectra)
• -180.0 - +180.0(alt)
• FFT frequency spacing(fft_frequency_spacing)
• Height of center of first gate above ground level(first_gate_height)
• Beam azimuth angle(beam_azimuth)
• North Latitude(lat)
• Beam number(beam_number)
• Number of frequency domain integrations(num_frequency_domain_integrations)
• Mode number(mode_number)
• Number of time domain integrations(num_time_domain_integrations)
• First reported spectra bin(first_reported_spectra_bin)
• Beam zenith, nominal(beam_zenith)
• Period between two pulses(interpulse_period)
• time_in_seconds_since_volume_start(time)
• base time in epoch(base_time)
• lon(lon)
• Row vector which describes the noise threshold for each gate(noise_threshold)

• Time offset from base_time(time_offset)
• North Latitude(lat)
• Mode number(mode_number)
• -180.0 - +180.0(alt)
• First reported spectra bin(first_reported_spectra_bin)
• Row vector which describes the noise threshold for each gate(noise_threshold)
• Beam number(beam_number)
• Period between two pulses(interpulse_period)
• time_in_seconds_since_volume_start(time)
• Spectra(spectra)
• base time in epoch(base_time)
• FFT frequency spacing(fft_frequency_spacing)
• Number of time domain integrations(num_time_domain_integrations)
• Pulse width(pulse_width)
• Beam azimuth angle(beam_azimuth)
• Height of center of first gate above ground level(first_gate_height)
• lon(lon)
• Interval between gates(gate_interval)
• Number of FFT points in measurement(num_fft_points)
• Beam zenith, nominal(beam_zenith)
• Number of frequency domain integrations(num_frequency_domain_integrations)

• Beam number(beam_number)
• Interval between gates(gate_interval)
• Beam zenith, nominal(beam_zenith)
• time_in_seconds_since_volume_start(time)
• Time offset from base_time(time_offset)
• Number of FFT points in measurement(num_fft_points)
• lon(lon)
• Number of time domain integrations(num_time_domain_integrations)
• Number of frequency domain integrations(num_frequency_domain_integrations)
• Row vector which describes the noise threshold for each gate(noise_threshold)
• Period between two pulses(interpulse_period)
• base time in epoch(base_time)
• Spectra(spectra)
• -180.0 - +180.0(alt)
• North Latitude(lat)
• Beam azimuth angle(beam_azimuth)
• Pulse width(pulse_width)
• Mode number(mode_number)
• First reported spectra bin(first_reported_spectra_bin)
• Height of center of first gate above ground level(first_gate_height)
• FFT frequency spacing(fft_frequency_spacing)

• lon(lon)
• Row vector which describes the noise threshold for each gate(noise_threshold)
• FFT frequency spacing(fft_frequency_spacing)
• Period between two pulses(interpulse_period)
• base time in epoch(base_time)
• North Latitude(lat)
• Number of FFT points in measurement(num_fft_points)
• -180.0 - +180.0(alt)
• Interval between gates(gate_interval)
• Beam zenith, nominal(beam_zenith)
• Number of time domain integrations(num_time_domain_integrations)
• Spectra(spectra)
• Height of center of first gate above ground level(first_gate_height)
• time_in_seconds_since_volume_start(time)
• Time offset from base_time(time_offset)
• First reported spectra bin(first_reported_spectra_bin)
• Number of frequency domain integrations(num_frequency_domain_integrations)
• Mode number(mode_number)
• Beam number(beam_number)
• Pulse width(pulse_width)
• Beam azimuth angle(beam_azimuth)