ENA/GHG/C1 - Reprocess: enaaosghgauxC1.a1

D160323.4 was recently completed. But that DQR did not specify rearchiving the 
enaaosghgauxC1.a1 data that is created when the enaaosghgC1.a1 data is created. 

We need to re-reprocess this date and this time store the enaaosghgauxC1.a1 data in the 
Archive. 

There will be some minor changes in the data. When NaN values are found in raw data 
columns, those values will be replaced with -9999 values.

• Pressure in calibration cylinder 1 line(calibration_cylinder_1_line_pressure)
• Calibration cylinder 2 high pressure(calibration_cylinder_2_pressure)
• Air flow near rear fan in pump box.(rear_fan_flow)
• Measured Nafion box temperature.(nafion_box_temperature)
• Dry purge cylinder high pressure(dry_purge_cylinder_pressure)
• -180.0 - +180.0(alt)
• Chiller temperature during 1 minute interval.(chiller_temperature)
• Battery minimum in 1 minute interval(battery_minimum)
• Line pressure of tower inlet(line_pressure_tower_inlet)
• Pressure in dry purge cylinder line(dry_purge_line_pressure)
• North Latitude(lat)
• Measured pressure control(pressure_control)
• base time in epoch(base_time)
• lon(lon)
• Time offset from base_time(time_offset)
• Pressure in calibration cylinder 2 line(calibration_cylinder_2_line_pressure)
• Measured pump box temperature(pump_box_temperature)
• Time range for the hourly averages, in time offset from midnight(time_bounds)
• Nafion drier purge pressure(nafion_purge_pressure)
• Flow of Nafion box dry purge(dry_purge_flow)
• time_in_seconds_since_volume_start(time)
• Calibration cylinder 1 high pressure(calibration_cylinder_1_pressure)
• Calibration cylinder 3 high pressure(calibration_cylinder_3_pressure)
• Liquid alarm for tower inlet(liquid_alarm_tower_inlet)
• Air flow near front fan in pump box.(front_fan_flow)
• Pressure in calibration cylinder 3 line(calibration_cylinder_3_line_pressure)
• Exhaust flow(exhaust_flow)