ENA/AOS/C1 -Internal pump failure

The internal pump of the CAPS failed.  Vendor (Aerodyne) sent a replacement pump. The 
replacement pump was installed by onsite tech on 11/24/2016 at 17:34.

Do not use data

• Last baseline check(last_baseline)
• Status of pump(status_pump)
• Diagnostic flags from data packet(status_flags)
• Raw measure of cavity loss(raw_loss)
• Light signal level(signal)
• Baseline status(status_baseline)
• Ambient temperature of instrument(ambient_temperature)
• Internal instrument pressure(caps_pressure)
• Aerosol extinction coefficient, red nominal wavelength(Bext_R)
• Ambient pressure(ambient_pressure)

• Raw measure of cavity loss(raw_loss)
• Ambient pressure(ambient_pressure)
• Status of pump(status_pump)
• Baseline status(status_baseline)
• Aerosol extinction coefficient, red nominal wavelength(Bext_R)
• Internal instrument pressure(caps_pressure)
• Diagnostic flags from data packet(status_flags)
• Light signal level(signal)
• Last baseline check(last_baseline)
• Ambient temperature of instrument(ambient_temperature)

• (Raw data stream - documentation not supported)